Nozzle تاندیش قندانی

Nozzle تاندیش قندانی

Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش as قندانی and استکانی in sizes 11 to 16 in quality, 65%, and -75% to -85% and 95% can be for more information with the unit sale of the company to issue (At the bottom of the ad)contact please. Nozzle تاندیش the direction of outflow of the melt from تاندیش (cauldron of the middle) to the inside of the mold copper (کریستالیزاتور) machine continuous casting.That based on the time of casting, temperature, and conditions there melting % زیرکونیای(اینزرت) and analysis of the bricks in it are different.

Brick and اینزرت zirconia, typically with different percentages of alumina can be made in two types of meal and drink. in the type of drink due to the lack of push presses from the analysis, the better and stronger, in order to cope with the melt used.

Gap created between the اینزرت zirconia bricks can be used with presses up to each other with a sealing grout. part of the brain (اینزرت ) inside the bricks of ceramic (zirconia) is the pressure and temperature of the top of the melt, it is well tolerate . According to the conditions of the melt percent, اینزرت used normally from 65% to 95%.

Nozzle تاندیش for use before the melt should be from both sides (the inside part of the تاندیش ) and اینزرت from the outside good ago be heated, because in the event of non-compliance with this point, causing shock, seeing the nozzle and breaks down the brick or leave, removal, or filling the lips, اینزرت .

Before تحلیه melt in تاندیش inside the duct nozzle تاندیش from the sand, refractories such as chromite, fill, slag, and other impurities enter the melt نشضود and melted, under controlled conditions, واردقالب.

Brick and اینزرت nozzle تاندیش in the form of there are different also based on the speed of casting and the dimensions of the mould hole diameter part zirconia is also changed .

According to the different seasons of the year due to a drop in the temperature of the melt diameter اینزرت زیرکونایی also change . Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش in the model, قندانی and استکانی in sizes 11 to 16 can be, if needed, with دفترفروش the company to issue (At the bottom of the ad)contact please .

Nozzle تاندیش on the floor of the تاندیش located, and the number of packages to نعداد casting lines.

Also, due to the amount of tonnage of steel castings, the percentage of zirconia and alumina ولبلوک is changed .

According to the cross sections of billets, casting, and the conditions of melting can be the diameter of the nozzle تاندیش the direction of outflow of the melt determined .

The quality of the zirconia used in the nozzle تاندیش very important because it increases or decreases the speed of casting can be, which eventually causes the tearing line of the casting and stop.

Nozzle تاندیش to a few models, is consumed .

1 - nozzle تاندیش قندانی with zirconia all the

2-nozzle تاندیش استکانی with zirconia half height

3 - nozzle تاندیش with zirconia all the

4 - nozzle تاندیش all zirconia

The nozzles in two models of Percy and مونتاژشده with the mortar green .

ولبلوک the nozzle, both round and rectangular are available.

ولبلوک nozzle تاندیش due to the amount of tonnage of steel castings made with different percentages, alumina available .