Chromite Sand Sliding Valve Floor Lozenges

Chromite Sand Sliding Valve Floor Lozenges

Chromite Sand Chrome Nozzle Patio Sliding Valve System

: NAOZZLE Filling Compound (NFC)

A) Chromite:

1. • Reduces production costs
2. • Increases the safety factor of the sliding valve system
3. • Spontaneous opening of more than 98% of the duct and No need for oxygen lance
4. • Increased safety factor of the operator
5. • Prevention of drop in melt temperature due to early opening of the valve
6. • No formation of non-metallic impurities and oxides and no entry of oxygen into the melt
7. • Application on the plates of the sliding gate pot and tandish system

b) - Instruction and method Consumption

1. • Before using the sand, the duct valve should be completely cleaned of slag and sludge.
2. • The sand of the duct should be heated to 120 ° C before use. Heat to remove moisture.
3. • Move the sand through a sliding guide hole into the sliding valve hole and make sure that the volume of sand is about twice the volume of the nozzle chamber.
4. • Before emptying the melt from the furnace into the pan to be careful not to hit the sand dune.
5. • The properties of the sand should be such that after emptying the melt From the furnace into the ladle, a thin sintered surface layer is formed on the hill surface on the mantle discharge channel of the ladle. And the melt is automatically removed from the pan.
6. • After casting, first the slag and the remaining melt in the pan is removed and then the nozzle is cleaned with an oxygen lens and ready to be filled with sand for melting The next grinding is done. Salim Sanat Sepahan Company is one of the producers of chromite sand. Approved by a large number of esteemed consumers and is being sold and consumed. The grade is 33% chromite. In addition to domestic consumption, it has recently been exported abroad. One of the unique advantages and features of the product of this company is 100% opening rate, which according to the announcement of some esteemed customers and consumers, is very similar to the foreign type. It is necessary to explain that this product is being consumed in 5 to 140 ton pots. 1- The amount of melting residue inside the pan

2- The capacity of the pan

3- The presence of a process plug for blowing from the floor

4- The diameter of the inner nozzle duct Slide gate pot

5- Working temperature

6- Melt composition

7- Existence of LF in the steelmaking process

Manufacturing company and Danesh Bonyan Salim Sanat Sepahan, a producer of chromite sand in the pot duct, announces its readiness to supply to steel mills by continuous casting method.

For more information, please contact the sales unit at (At the bottom of the ad). Production with quality from us and consumption with confidence from you. Thanks: Management of Salim Sanat Sepahan Company