Filter Sell Offers:

Sell Offers Glue Province South Khorasan

  • در بخش Sell Offers، دسته بندی Glue، Province South Khorasan موردی پیدا نشد.
    دسته بندی Glue را امتحان کنید.
      Similar Products
      • Polyvinyl alcohol, PVA, pva

        Polyvinyl alcohol, PVA, pva

        ????Special sale of polyvinyl alcohol PVA 2088 and PVA 2488, very reasonable price and limited quantity. It is new and similar to PVA 2488 ????Selling all kinds of polyvinyl alcohol in all kinds of grades. Selling all kinds of polyvinyl alcohol in different packages from 1 kg to 25 kg and tonnage instagram.com/shahed_rang.epoxi ????Various grades of polyvinyl alcohol available ???? ✔ Polyvinyl alcohol 2488 China ✔ Polyvinyl alcohol 2088 China ✔ Polyvinyl alcohol 8850 China ✔ Polyvinyl alcohol 8835 China ✔ Polyvinyl alcohol BP24 Taiwan ✔ Polyvinyl alcohol BP20 Taiwan ✔ Japan polyvinyl alcohol JP24 ✔ Japan polyvinyl alcohol JP20 ✔Polyvinyl alcohol Kurari Singapore ????In all kinds of grades to make all kinds of slime glue ????Glue stick ????Water based resins ????Format separator ????Gluing and... Contact for more information ????Orders and advice only through WhatsApp or phone calls 09127647807 02155804146 02155804794 09124206311 @shahed_rang

        Glue Tehran
      • Devcon Plastic-Steel Putty A

        Devcon Plastic-Steel Putty A

        DEVCON A\r\nDecon A adhesive is one of the industrial products of the Irish DEVCON company. Welding is used. This epoxy is easily attached to all kinds of materials and is resistant to oil, fuel, water and many chemicals. This product can be used for inexpensive repair of parts and surfaces including pipes. used bearings, machines, etc.\r\nDEVCON A steel epoxy putty is suitable for filling, restoring and gluing metal surfaces and for use as metal welding in areas where welding is not possible.\r\n\r\nDucon A is resistant to chemicals, alcohol, solvents and acids.\r\n\r\nThis product is gray in color and can be machined after drying. degrees Celsius.\r\n\r\nThis DEVCON product can be connected to various materials such as iron, steel, concrete and aluminum.\r\n\r\nThis DEVCON product can be used for repairing equipment, parts and Various surfaces, including pipes, bearings, machines, etc., are used at a very low cost.\r\n\r\nThe problems created in the casting of industrial parts can be corrected by Dokan A.

        Glue Esfahan
      • 5cm print adhesive tape

        5cm print adhesive tape

        Azar Adhesive Company has been able to meet customer satisfaction and needs by producing printed adhesives in different widths We can do print on the adhesive bar in the least possible number for you. The minimum printable number of adhesive tape is 60 rings. The company has also been able to produce a simple adhesive tape for different thicknesses for different uses using advanced devices. You can visit azarchasb.ir or contact 09360648395 or 04133432531.

        Glue East Azarbaijan
      • Adhesive 123 400 ml

        Adhesive 123 400 ml

        The 123 -profile adhesive, whose industrial name is cyanocrylate, or instant adhesive or versatile adhesive usually has a fatty or accelerator spray that is used before the liquid and increases the adhesion speed. The spray makes the glue glue faster to the desired surface. 400 ml weight Application of Plastic Industries - Medical Industries - Zebali Industries - Construction, Home, Metal, Wooden Industries Submitting quickly to all parts of the country Contact us to purchase and install polyurethane boards and find out the price of a board polyurethane insulation Engineer Chavoshi 09199644020 09022454984 Polyurethane Board Insulation Al -Zal al -Lahurah Fast communication through our Instagram: _instagram.com/kara_energy Website: https://www.karaaa.com/ Website: kara

        Glue Tehran
      • Opolac 2100 similar to Araldite 2011

        Opolac 2100 similar to Araldite 2011

        Opolak 2100 is a two-component, environmental curing adhesive with high strength and good toughness. This glue can be used to glue all kinds of metals, rubber, ceramics, thermoset plastics. It is a versatile adhesive for various industries. This adhesive can be used in chemical environments with medium temperature and corrosiveness.\r\nUses\r\n Pipe connection and GRE, GRP and GRVE composite connections\r\n Repair of metal pipelines\r\n Repair of composite pipelines\r\n Bonding of various parts in water and sewage, petrochemical and oil and gas industries\r\nSpecification\r\n Multipurpose\r\n Low shrinkage\r\n Good chemical resistance\r\n Environmental baking\r\n Temperature tolerance of 80 degrees Celsius\r\nHow to use\r\nThe amount of strength obtained from the glue and its durability during the working life depends on the level of preparation of the desired surfaces before applying the glue.\r\nBefore mixing the glue, clean the desired surfaces and free from dust and grease.\r\nFor metal surfaces, the oxidized surface must be removed to expose the white and clean surface of the metal. For other materials, the old surface must be removed in some way during the sanding or grinding process until a rough and new surface is created. Also, painted surfaces must be completely free of paint.\r\n\r\nMixing percentage\r\n100 grams = 2100 / A\r\n50 grams = 2100 / B\r\n\r\nThen mix component A and component B completely with the proportions given in the table above and apply a thin film of it on both surfaces that you want to glue together. The highest shear strength is achieved in glue with a thickness of 0.5 to 1 mm. Keep the desired surfaces fixed and motionless until the glue is cured.

        Glue Khorasan Razavi
      • Opolak 6100 similar to Belzona 1111

        Opolak 6100 similar to Belzona 1111

        Opolak 6100 is a two-component adhesive for repairing and renovating all kinds of machines and equipment. This glue is similar to Belzona 1111 glue, which is based on resins\r\nEpoxy is made with high molecular weight and reinforced with silicon steel, so that it can be easily machined after the glue is fully cured. also\r\nIt can be used as a high strength structural adhesive for gluing all kinds of metal parts to create load bearing shims or to repair them.\r\nUses\r\n✓ Repairing shafts and hydraulic jacks\r\n✓ Repair of parietal tubes\r\n✓ Repairing the shell of industrial equipment and seats and thorn holders\r\n✓ Repair of metal pipes and tanks\r\n✓ Repair of engine shell and parts\r\n✓ Repairing the surface of metal flanges\r\nSpecification\r\n✓ Excellent wear resistance\r\n✓ Appropriate temperature and chemical resistance\r\n✓ Electrical insulation\r\n✓ High strength\r\nHow to use\r\nThe amount of strength obtained from the glue and its durability during the working life depends on the level of preparation of the desired surfaces before applying the glue. Before mixing the glue, clean the desired surfaces and free from dust and grease. Suitable solvents such as acetone can be used to degrease surfaces. direction\r\nThe oxidized surface of metal surfaces should be removed to reveal a white and clean metal surface. For other materials, the old surface must be removed somehow during the process\r\nSanding, grinding or sandblasting to create a rough and new surface. Also, the painted surfaces must be completely free of paint.\r\nIn the parts where there are cracks with dimensions of 70 to 100 mm, it is necessary to stabilize the cracks by drilling and screwing. Remove small cracks by sanding and clean and prepare the surface again. Cover the parts to which the glue does not need to stick with paper tape or with separating wax, then mix the entire amount of resin and hardener from two cans of both components until the color of the glue is completely uniform. At temperatures below 10 degrees Celsius\r\nEasy to mix glue, bring the temperature to 20 to 25 degrees Celsius and then mix the two components. ) if smaller amounts of glue are required\r\nUse the table above (and apply with a spatula on both the surfaces you want to glue together or the surface you want to cover.\r\nPress the glue completely on the surface so that all the cracks and pores of the surface are filled with glue. If used to glue two surfaces, keep the desired surfaces fixed and motionless until the glue is cured.\r\nIn order to achieve the best result and the highest adhesive adhesion to surfaces, consider the following:\r\n✓ Do not use glue in temperatures below 5 degrees Celsius and humidity of 90% and in the presence of fog, steam, snow and rain. At the time of use, the application surface must be completely dry\r\n✓ Use glue in contaminated places with the possibility of oil and grease contamination due to the operation of nearby devices or contaminated with oil vapors and cigarette smoke.\r\n\r\nMixing percentage by weight\r\n5 parts resin component\r\n1 part Hardener component

        Glue Khorasan Razavi
      • Opolak 6500 similar to Belzona 1311

        Opolak 6500 similar to Belzona 1311

        Opolak 6500 is a two-component adhesive for renovating all kinds of metals damaged by abrasion corrosion. This adhesive is similar to Belzona 1311, which is based on high molecular weight epoxy resins reinforced with silicon steel and ceramic particles with high wear resistance, and the adhesive formulation is designed to act as a corrosion and wear resistant coating. be used It can also be used as a high strength structural adhesive for gluing all kinds of metal parts to create load-bearing shims or to repair them.\r\n\r\n**Uses**\r\n Repair of all types of pumps\r\n Repair of butterfly and gate valves\r\n Repair of elbow and tee joints\r\n Repair of heat exchangers and its components including tube sheets\r\n Restoration of butterflies\r\n\r\n**Specification**\r\nExcellent wear resistance\r\n Suitable temperature and chemical resistance\r\n Electrical insulation\r\n High strength\r\n\r\n**how to use**\r\nThe amount of strength obtained from the glue and its durability during the working life depends on the level of preparation of the desired surfaces before applying the glue.\r\nBefore mixing the glue, clean the desired surfaces and free from dust and grease. For metal surfaces, the oxidized surface must be removed\r\nuntil the white and clean surface of the metal appears. For other materials, the old surface must be removed in some way during the sanding, grinding or sand-blasting process to create a rough and new surface. Also, the painted surfaces must be completely free of paint.\r\nIn the parts where there are cracks with dimensions of 70 to 100 mm, it is necessary to stabilize the cracks by drilling and screwing. Remove small cracks by sanding and clean and prepare the surface again. Cover the parts that do not need to be glued with paper tape or with separating wax.\r\n\r\n**mixing percentage by weight**\r\n5 parts resin component\r\n1 part Hardener component\r\nThen mix the entire amount of resin and hardener from two cans of both components completely until the color of the glue is completely uniform. At a temperature less than 10 degrees Celsius, bring the glue to a temperature of 20 to 25 degrees Celsius and then mix the two components. (If smaller amounts of glue are needed, use the table above) and apply with a spatula on both the surfaces you want to glue together or the surface you want to cover.\r\nPress the glue completely on the surface so that all the cracks and pores of the surface are filled with glue. If used to glue two surfaces, keep the desired surfaces fixed and motionless until the glue is cured.\r\nIn order to achieve the best result and the highest adhesive adhesion to surfaces, consider the following:\r\n Do not use glue in temperatures below 5 degrees Celsius and humidity of 90% and in the presence of fog, steam, snow and rain. At the time of use, the application surface must be completely dry\r\n Use glue in contaminated places with the possibility of contamination with oil and grease caused by the operation of nearby devices or contaminated with oil vapors and cigarette smoke.

        Glue Khorasan Razavi
      • Oplock 6100L similar to Devcon Grade A

        Oplock 6100L similar to Devcon Grade A

        Opolak 6100 is a two-component adhesive for repairing and renovating all kinds of machines and equipment. This glue is similar to Belzona 1111 glue, which is based on resins\r\nEpoxy is made with high molecular weight and reinforced with silicon-containing steel, so that it can be easily machined after the glue is fully cured. also\r\nIt can be used as a high strength structural adhesive for gluing all kinds of metal parts (to create a load-bearing shim) or to repair them.\r\n\r\n**Uses**\r\n✓ Repair of shafts and hydraulic jack\r\n✓ Repair of parietal tubes\r\n✓ Repairing the shell of industrial equipment and seats and thorn holders\r\n✓ Repair of metal pipes and tanks\r\n✓ Repair of engine shell and parts\r\n✓ Repairing the surface of metal flanges\r\n\r\n**Specification**\r\n✓ Excellent wear resistance\r\n✓ Appropriate temperature and chemical resistance\r\n✓ Electrical insulation\r\n✓ High strength\r\n\r\n**how to use**\r\nThe amount of strength obtained from the glue and its durability during the working life depends on the level of preparation of the desired surfaces before applying the glue. Before mixing the glue, clean the desired surfaces and free from dust and grease. Suitable solvents such as acetone can be used to degrease surfaces. direction\r\nThe oxidized surface of metal surfaces should be removed to reveal a white and clean metal surface. For other materials, the old surface must be removed somehow during the process\r\nSanding, grinding or sandblasting (to create a rough and fresh surface. Also, the painted surfaces must be completely free of paint.\r\nIt is necessary in the parts where there are cracks with dimensions of 70 to 100 mm\r\nFix the cracks by drilling and screwing. Remove small cracks by sanding and clean and prepare the surface again. Cover the parts that do not need to be glued with paper tape or with separating wax.\r\n\r\n**mixing percentage by weight**\r\n5 parts resin component\r\n1 part Hardener component\r\nThen, mix the total amount of resin and hardener from two cans of both components completely so that the color of the glue is completely uniform. At a temperature below 10 degrees Celsius, bring the glue to a temperature of 20 to 25 degrees Celsius and then mix the two components. (If smaller amounts of glue are needed, use the table above) and apply with a spatula on both the surfaces you want to glue together or the surface you want to cover.\r\nPress the glue completely on the surface so that all the cracks and pores of the surface are filled with glue. If used to glue two surfaces, keep the desired surfaces fixed and motionless until the glue is cured.

        Glue Khorasan Razavi
    Glue
    Price list and manufacturers of adhesives, including rubber adhesive, double-layer adhesive adhesive, fire-retardant adhesive, Belzona adhesive, polyurethane adhesive, silicone adhesive, polyurethane mastic