Oplock 6100L similar to Devcon Grade A

Name: Oplock 6100L similar to Devcon Grade A
Brand: Apollok is the leading knowledge base of the Barthava link structure
Price: 13200000 IRR
Availability: OutOfStock
Rating: 2.5 (1 reviews)

Apollok is the leading knowledge base of the Barthava link structure
View: 701
updated: 08 Apr 2024
Expire: Wednesday 08 Apr 2026
15.78 USD
- IRT
- USD
- EUR
Rate: ( Rate count: 1 ) Add a Comment

Contact with the company

1 Year

Product Detail
Company Info
Other company products
Comments

Oplock 6100L similar to Devcon Grade A

Opolak 6100 is a two-component adhesive for repairing and renovating all kinds of machines and equipment. This glue is similar to Belzona 1111 glue, which is based on resins
Epoxy is made with high molecular weight and reinforced with silicon-containing steel, so that it can be easily machined after the glue is fully cured. also
It can be used as a high strength structural adhesive for gluing all kinds of metal parts (to create a load-bearing shim) or to repair them.

Uses
✓ Repair of shafts and hydraulic jack
✓ Repair of parietal tubes
✓ Repairing the shell of industrial equipment and seats and thorn holders
✓ Repair of metal pipes and tanks
✓ Repair of engine shell and parts
✓ Repairing the surface of metal flanges

Specification
✓ Excellent wear resistance
✓ Appropriate temperature and chemical resistance
✓ Electrical insulation
✓ High strength

how to use
The amount of strength obtained from the glue and its durability during the working life depends on the level of preparation of the desired surfaces before applying the glue. Before mixing the glue, clean the desired surfaces and free from dust and grease. Suitable solvents such as acetone can be used to degrease surfaces. direction
The oxidized surface of metal surfaces should be removed to reveal a white and clean metal surface. For other materials, the old surface must be removed somehow during the process
Sanding, grinding or sandblasting (to create a rough and fresh surface. Also, the painted surfaces must be completely free of paint.
It is necessary in the parts where there are cracks with dimensions of 70 to 100 mm
Fix the cracks by drilling and screwing. Remove small cracks by sanding and clean and prepare the surface again. Cover the parts that do not need to be glued with paper tape or with separating wax.

mixing percentage by weight
5 parts resin component
1 part Hardener component
Then, mix the total amount of resin and hardener from two cans of both components completely so that the color of the glue is completely uniform. At a temperature below 10 degrees Celsius, bring the glue to a temperature of 20 to 25 degrees Celsius and then mix the two components. (If smaller amounts of glue are needed, use the table above) and apply with a spatula on both the surfaces you want to glue together or the surface you want to cover.
Press the glue completely on the surface so that all the cracks and pores of the surface are filled with glue. If used to glue two surfaces, keep the desired surfaces fixed and motionless until the glue is cured.

Apollok is the leading knowledge base of the Barthava link structure

Trusted Company
Company registration date: 2015-03-21
Number of staff: 1-10 Person
Company activities: producer
Place: Iran, Province Khorasan Razavi
In the field of: چسب
Company Type: Private

دریافت کاتالوگ شرکت

Danesh Banyan Co., Ltd., the leading company of Barthava Linkage Coupling with the Opolak brand, produces epoxy adhesives and anti-corrosion coatings. In this regard, this company has succeeded in formulating and localizing adhesives for the construction, civil, oil and gas, and marine industries, which are equivalent to metal repair coatings. Belzona, Devcon and Weicon.

Description of foreign equivalent goods
EPOLOCK 1100 Megapoxy – PM / Australia
EPOLOCK 1100F Megapoxy – PF / Australia
EPOLOCK 1200 Megapoxy – HX / Australia
EPOLOCK 1300 Hilti / America
EPOLOCK 1400 ***
EPOLOCK 1500 Sikadur 52
EPOLOCK 1600 Megapoxy – 69 / Australia
EPOLOCK 1700 ***
EPOLOCK 1800 Megapoxy – H / Australia
EPOLOCK 1900 ***
EPOLOCK 1910 ***

EPOLOCK 2100 Araldite 2011/ America
EPOLOCK 2200 Araldite 2015 - RP48/ America
EPOLOCK 2400 ***
EPOLOCK 3100 ***
EPOLOCK 5100 ***
EPOLOCK 6100 Belzona 1111/England
EPOLOCK 6100D Devcon Plastic Steel Putty Grade A/Germany
EPOLOCK 6100L Devcon Plastic Steel liquid Grade B/Germany
EPOLOCK 6700P Belzona 1511/England
EPOLOCK 6200 Belzona 1211/England
EPOLOCK 6400 Weicon Plastic Metal/Germany
EPOLOCK 6500 Belzona 1311/England
EPOLOCK 6600 Belzona 1321/ England
EPOLOCK 6700L Belzona 1593/England
EPOLOCK 6910 Devcon Bronze / Germany
EPOLOCK 6900L Devcon aluminum liquid/ Germany
EPOLOCK 6900P Devcon Aluminum Putty/Germany
EPOLO...

Contact Info: Apollok is the leading knowledge base of the Barthava link structure

Company	اپولاک دانش بنیان پیشرو سازه پیوند بارثاوا
Tel	+98 51-3×××4843 Make Call
Mobile	+98 915×××3464 Make Call
Whatsapp	Whatsapp link
Website	https://epolock.com/
Country	Iran
Province	Khorasan Razavi
Address	مشهد، کیلومتر ۱۲ بزرگراه آسیای، فاز چهار شهرک صنعتی، تلاش جنوبی، بلوار فلزتراشان 6 قطعه 154
Postal code	9185173368

Fullname :

Mobile or Email :*

Subject :

Message Text :

Company Profile

FAQs

The latest products in this category

Nasal lift glue

Original Nasal Nasal Lift Adhesive, completely transparent and colorless with high adhesion power \r\nFor lift and nose formation, nose and bone nose \r\nFor lift \r\nEach roll is about 9 meters to consume 3 months \r\nOrder 09057009625 \r\nMajor order = free sending\r\nFor the wholesale order please notify 5 days ago.
Tehran
Stretch adhesive pT-70

Stretch adhesive raw materials
Tehran
Manufacturer of white and black Forex gl ...

Forks Tile Adhesive is the largest distribution center of this successful brand located in Alborz province. . Forks glue is suitable for all kinds of antique stone, bathroom wall tiles, bathroom tiles and all kinds of materials related to stone, brick and tile. This glue is very effective for use in wet environments. Using this glue, you can stick all kinds of high and low size products in different rectangular and square shapes to the wall and floor. It can also be used in environments that are in contact with water, such as the bathroom.\r\nForex glue is of very high quality and can be used for all kinds of materials. Using this glue, you can stick all kinds of high and low size products in different rectangular and square shapes to the wall and floor. It can also be used in environments that are in contact with water, such as the bathroom.\r\nForex glue is the only product that uses a separate plastic with high thickness in the packaging. These thick plastics can prevent the product from drying out in a short period of time.\r\nRight now, in our store, it is possible to buy wholesale and retail all kinds of paste and powder glue models. You can order by calling or through social networks. Customers can also make purchases in person.\r\nBulk purchases can benefit from special discounts if they weigh more than 2500 kg. These discounts will reduce the price of goods by 10% and will be suitable for major uses.\r\nIt is possible to buy Forks tile adhesive for the wall, and for the floor you should use Forks powder adhesive.\r\nContact us for free consultation and more information.\r\n\r\n • Quality and variety of products\r\n • First class designs\r\n• Excellent price\r\n• Partial and general sales\r\n\r\nOnline and face-to-face sales\r\n\r\nReady to cooperate with respected contractors and mass builders\r\n\r\nWhatsApp number to view pictures, price and order\r\n09309135303
- Gold
- 3 Year
Alborz
Oplock 6100L similar to Devcon Grade A

Opolak 6100 is a two-component adhesive for repairing and renovating all kinds of machines and equipment. This glue is similar to Belzona 1111 glue, which is based on resins\r\nEpoxy is made with high molecular weight and reinforced with silicon-containing steel, so that it can be easily machined after the glue is fully cured. also\r\nIt can be used as a high strength structural adhesive for gluing all kinds of metal parts (to create a load-bearing shim) or to repair them.\r\n\r\n**Uses**\r\n✓ Repair of shafts and hydraulic jack\r\n✓ Repair of parietal tubes\r\n✓ Repairing the shell of industrial equipment and seats and thorn holders\r\n✓ Repair of metal pipes and tanks\r\n✓ Repair of engine shell and parts\r\n✓ Repairing the surface of metal flanges\r\n\r\n**Specification**\r\n✓ Excellent wear resistance\r\n✓ Appropriate temperature and chemical resistance\r\n✓ Electrical insulation\r\n✓ High strength\r\n\r\n**how to use**\r\nThe amount of strength obtained from the glue and its durability during the working life depends on the level of preparation of the desired surfaces before applying the glue. Before mixing the glue, clean the desired surfaces and free from dust and grease. Suitable solvents such as acetone can be used to degrease surfaces. direction\r\nThe oxidized surface of metal surfaces should be removed to reveal a white and clean metal surface. For other materials, the old surface must be removed somehow during the process\r\nSanding, grinding or sandblasting (to create a rough and fresh surface. Also, the painted surfaces must be completely free of paint.\r\nIt is necessary in the parts where there are cracks with dimensions of 70 to 100 mm\r\nFix the cracks by drilling and screwing. Remove small cracks by sanding and clean and prepare the surface again. Cover the parts that do not need to be glued with paper tape or with separating wax.\r\n\r\n**mixing percentage by weight**\r\n5 parts resin component\r\n1 part Hardener component\r\nThen, mix the total amount of resin and hardener from two cans of both components completely so that the color of the glue is completely uniform. At a temperature below 10 degrees Celsius, bring the glue to a temperature of 20 to 25 degrees Celsius and then mix the two components. (If smaller amounts of glue are needed, use the table above) and apply with a spatula on both the surfaces you want to glue together or the surface you want to cover.\r\nPress the glue completely on the surface so that all the cracks and pores of the surface are filled with glue. If used to glue two surfaces, keep the desired surfaces fixed and motionless until the glue is cured.
- 1 Year
Khorasan Razavi
Opolak 6500 similar to Belzona 1311

Opolak 6500 is a two-component adhesive for renovating all kinds of metals damaged by abrasion corrosion. This adhesive is similar to Belzona 1311, which is based on high molecular weight epoxy resins reinforced with silicon steel and ceramic particles with high wear resistance, and the adhesive formulation is designed to act as a corrosion and wear resistant coating. be used It can also be used as a high strength structural adhesive for gluing all kinds of metal parts to create load-bearing shims or to repair them.\r\n\r\n**Uses**\r\n Repair of all types of pumps\r\n Repair of butterfly and gate valves\r\n Repair of elbow and tee joints\r\n Repair of heat exchangers and its components including tube sheets\r\n Restoration of butterflies\r\n\r\n**Specification**\r\nExcellent wear resistance\r\n Suitable temperature and chemical resistance\r\n Electrical insulation\r\n High strength\r\n\r\n**how to use**\r\nThe amount of strength obtained from the glue and its durability during the working life depends on the level of preparation of the desired surfaces before applying the glue.\r\nBefore mixing the glue, clean the desired surfaces and free from dust and grease. For metal surfaces, the oxidized surface must be removed\r\nuntil the white and clean surface of the metal appears. For other materials, the old surface must be removed in some way during the sanding, grinding or sand-blasting process to create a rough and new surface. Also, the painted surfaces must be completely free of paint.\r\nIn the parts where there are cracks with dimensions of 70 to 100 mm, it is necessary to stabilize the cracks by drilling and screwing. Remove small cracks by sanding and clean and prepare the surface again. Cover the parts that do not need to be glued with paper tape or with separating wax.\r\n\r\n**mixing percentage by weight**\r\n5 parts resin component\r\n1 part Hardener component\r\nThen mix the entire amount of resin and hardener from two cans of both components completely until the color of the glue is completely uniform. At a temperature less than 10 degrees Celsius, bring the glue to a temperature of 20 to 25 degrees Celsius and then mix the two components. (If smaller amounts of glue are needed, use the table above) and apply with a spatula on both the surfaces you want to glue together or the surface you want to cover.\r\nPress the glue completely on the surface so that all the cracks and pores of the surface are filled with glue. If used to glue two surfaces, keep the desired surfaces fixed and motionless until the glue is cured.\r\nIn order to achieve the best result and the highest adhesive adhesion to surfaces, consider the following:\r\n Do not use glue in temperatures below 5 degrees Celsius and humidity of 90% and in the presence of fog, steam, snow and rain. At the time of use, the application surface must be completely dry\r\n Use glue in contaminated places with the possibility of contamination with oil and grease caused by the operation of nearby devices or contaminated with oil vapors and cigarette smoke.
- 1 Year
Khorasan Razavi
Opolak 2200 similar to Araldite 2015

Opolak 2200 is a two-component, heat-curing adhesive with excellent chemical resistance and temperature tolerance. This glue can be used for gluing all kinds of metals, ceramics,\r\nused thermoset plastics. It is an adhesive for the harsh working conditions of the oil, gas and petrochemical industries. This adhesive in chemical environments with temperature and\r\nHigh corrosion can be used. The excellent chemical resistance of Epolak series 2200 glue against acids and bases with medium to high concentration is the reason for the high use of this glue.\r\nIt has been used in most chemical industries, petrochemicals, oil and gas industries, power plants, etc.\r\n\r\n**Uses**\r\n✓ GRE, GRP and GRVE composite pipes and fittings\r\n✓ Repair of metal pipelines\r\n✓ Repair of composite pipelines\r\n✓ Bonding all kinds of parts in the water and sewage, petrochemical and other industries\r\nOil and Gas\r\n\r\n**Specification**\r\n✓ Temperature resistance with la\r\n✓ Low shrinkage\r\n✓ High chemical resistance\r\n✓ Temperature cooking\r\n✓ Ability to withstand temperatures up to 150 degrees Celsius\r\n\r\n**how to use**\r\nThe amount of strength obtained from the glue and its durability during the working life depends on the level of preparation of the desired surfaces before applying the glue. Before mixing the glue, clean the desired surfaces and free from dust and grease\r\nFor metal surfaces, the oxidized surface must be removed to expose the white and clean surface of the metal. For other materials, the old surface must be removed in some way during the sanding or grinding process to create a rough and new surface. Also, the painted surfaces must be completely free of paint.\r\n\r\n**Percentage of disorder**\r\n100 grams = 2200 / A\r\n24 grams = 2200 / B\r\n\r\nThen mix component A and component B completely with the proportions given in the table above and apply a thin film of it on both surfaces that you want to glue together. The highest shear strength is achieved in glue with a thickness of 0.5 to 1 mm. Keep the desired surfaces fixed and motionless until the glue is cured.
- 1 Year
Khorasan Razavi