Drip irrigation tape

25 mm (3.4 inch) polyethylene pipe with working pressures of 6, 10, 5.12 and 16 atmospheres and is produced in the form of coils and in lengths of 100, 200 and 400 meters. 25 mm polyethylene pipe ( 3.4 inches) with working pressures of 6, 10, 5.12 and 16 atmospheres and is produced in the form of coils and in lengths of 100, 200 and 400 meters.\r\nFor connecting pipes with a diameter of 25 mm to each other or other better parts Polyethylene rib joints should be used, and due to the thinness of the pipe wall, it is not recommended to weld them.\r\nUse of 25 mm size polyethylene pipe: \r\nGas 25 pipe is used to branch off the gas piping, which must be Pay attention to the yellow line on the pipe, because this line indicates the use of polyethylene pipe for gas transmission. Be sure to use electrofusion fittings to connect gas pipes.\r\nTo cover electric and telecommunication cables to protect them, in this case, since there is no pressure on the pipe wall, use a standard unsealed pipe.\r\nOne Another use of pipe 25 is to transfer water and poisons to crops in greenhouses, agricultural fields and gardens. Our suggestion is to use standard and sunlight-resistant tubes in this field

Technical specifications of Hunter irrigation controller (intelligent irrigation timer ) • Hunter irrigation controller or timer in two types of outdoor space (Outdoor) and Indoor space is provided to dear customers. • The difference between indoor and outdoor timers is that in a closed or outdoor system, the controller receives the numerical information from the sensors, which we have already determined, command Issues the opening and closing of the solenoid valve and causes changes in the irrigation system. For example, it can be determined that if the humidity sensor is below 20%, solenoid number 2 will start working. In the outdoor system, all commands are pre-determined and given to the controller. For example, water the No. 4 solenoid valve for 2 hours every day at 2:00 PM. Therefore, this controller does not need to install sensors for temperature, humidity, sunlight, etc. For this reason, this controller must be readjusted, because it does not receive a response to environmental and climate change. This system is cheaper and has a high flexibility. Used models of Hunter irrigation controller • Hunter controller XC series • Hunter controller Pro-C • Hunter controller NODE series -100 • Hunter controller ACC 99-D Application of intelligent Hunter irrigation controller • Can be used in mechanized irrigation projects • To control and command solenoid valves and main valves And pump Technical specifications of Hunter irrigation controller (smart irrigation timer ) • Hunter irrigation controller or timer in two types of outdoor space (Outdoor) and Indoor space is provided to dear customers. • The difference between indoor and outdoor timers is that in a closed or outdoor system, the controller receives the numerical information from the sensors, which we have already determined, command Issues the opening and closing of the solenoid valve and causes changes in the irrigation system. For example, it can be determined that if the humidity sensor is below 20%, solenoid number 2 will start working. In the outdoor system, all commands are pre-determined and given to the controller. For example, water the No. 4 solenoid valve for 2 hours every day at 2:00 PM. Therefore, this controller does not need to install sensors for temperature, humidity, sunlight, etc. For this reason, this controller must be readjusted, because it does not receive a response to environmental and climate change. This system is cheaper and has a high flexibility. Used models of Hunter irrigation controller • Hunter controller XC series • Hunter controller Pro-C • Hunter controller NODE series -100 • Hunter controller ACC 99-D Application of intelligent Hunter irrigation controller • Can be used in mechanized irrigation projects • To control and command solenoid valves and main valves And pump

Hunter solenoid valve is a piece that is used to cut off and connect the flow of water and other fluids. Hunter solenoid valve made in America is one of the most widely used. There are solenoid valves that are used in the irrigation system. The solenoid of the Hunter solenoid valve is the same in all models and this is one of the unique features of the Hunter solenoid valve. The PGV Hunter solenoid valve is available in 1, 1.5 and 2 inch sizes. The ICV Hunter solenoid valve is available in 1-inch, 1.5-inch, 2-inch and 3-inch sizes. Hunter ICV model has EPDM diaphragm and is equipped with self-cleaning filtration system. Coil frame Connecting wires Metal rod

The advantages of this timer include the presence of a filter mesh at the entrance, an alarm and battery life display, a large display equipped with LED for use in the dark, the ability to separate the display panel from the timer body for ease of programming the timer, and the screen door for Preventing its damage pointed out. Amico timer is known as one of the most high-quality automatic irrigation timers, which is very popular among users. This timer is available in the market in two single-output and two-output models. The body of this timer is made of high-quality plastic and has a door for working in the outdoor environment.

Direct sale of the American Gun Nelson (150) sprinkler with a useful 70 meter spray line without hitting the ground and wasting water.\r\nSuitable for agricultural products