All Symbol Technology Development Company sell and buy offers

NAWEL Abrasion C\r\nMF 10-GF-60-G\r\nDifficulty 60-58 Rockwell C in the second pass of Josh\r\nNo need for protective gas during welding\r\nContains chromium carbide microstructure\r\nMild corrosion resistant\r\nExcellent wear resistance and light impact\r\nSuitable for general use of hardface, spiral and screw, anti-wear plate, roller mill, shot and liner, fan and pump impeller and...

NAWEL Abrasion Ultrahard B\r\nMF 10-GF-65-G\r\nContains boron in the form of carboboride\r\nHardness 67-65 Rockwell C \r\nsingle pass welding\r\nExcellent wear resistance\r\nNo need for protective gas during welding\r\n2 to 5 times stronger than chromium carbide\r\nResistant up to 300 degrees Celsius\r\nIdeal for hard face types of buckets, shots, liners, sheets, fans, mixer paddles, mill bodies, types of screws, spirals, etc.

NAWEL Abrasion Ultrahard BN MF 10-GF-65-GT Nano structure welding wire Contains boron and niobium Hardness 68-66 Rockwell C single pass No need for protective gas during welding Excellent resistance to severe wear at high temperature (550°C) Light impact resistance Two to five times stronger than chromium carbide Ideal for equipment under extreme wear and high temperature: shot and liner, fan, paddle mixer, shovel, all kinds of buckets, spirals and screws, mardon, anti-wear sheets, etc.

NAWEL Abrasion Ultrahard BNM\r\nMF 10-GF-70-GZ\r\nNano structure welding wire\r\nHardness above 67 Rockwell C\r\nSingle pass welding and low dilution\r\nNo need for shielding gas\r\nSuitable for dry or wet environment\r\nExcellent wear resistance at high temperature (700°C)\r\nAn economical and suitable alternative to tungsten carbide (efficiency up to 75% and a quarter of its price)\r\n2 to 5 times stronger than carbide chrome\r\nIdeal for hardface paddle mixer, shot and mineral liner, fan, anti-wear sheet, all kinds of spiral and screw, Mardon, bucket, steel and cement industries and....

NAWEL Abrasion LCBN\r\nMF 10-GF-60-GPT\r\nDifficulty 63-58 Rockwell C\r\nsingle pass welding\r\nNo need for shielding gas\r\nWelding without cracks\r\nExcellent resistance to heavy wear and moderate impact\r\nContains niobium and boron\r\nResistant up to 500 degrees Celsius\r\nIdeal for hard face equipment under wear and impact and high temperature: all kinds of hammers, shovels and loaders, grader blade tail, drilling equipment, oil transfer pipes, crusher rotor, sand blast and shot blast, mineral launder, protective plates Loading blast furnaces and....

NAWEL Abrasion TiC\r\nMF 6-GF-60-GPT\r\nDifficulty 61-56 Rockwell C\r\nTwo passes of welding\r\nNo need for shielding gas\r\nContains titanium carbide particles\r\nExcellent resistance to heavy wear and moderate impact\r\nPressure resistant\r\nResistant to temperatures below 500 degrees Celsius\r\nIdeal for hardface all types of equipment under wear and impact: hammer, rotor crusher, shot blast and sand blast, nail and bucket edge, mill rollers, agricultural machinery and....

NAWEL Rail\r\nMF 1-GF-300-P\r\nThe hardness is about 32 Rockwell C\r\nNo need for shielding gas\r\nGood resistance to moderate wear and moderate impact\r\nSuitable as a buffer\r\nIdeal for renovating low alloy steels\r\nContains titanium carbide and molybdenum\r\nAdequate toughness\r\nIdeal for rebuilding railway needles and rails, steel rollers, forging molds and tools, crane wheels, etc.

NAWEL Impact 510 MF 7-GF-250/510-KNP Welding wire containing a high percentage of manganese Headfield mechanism (ability to work hard and increase resistance due to continuous impact) Excellent resistance to wear and heavy impact single pass welding Welding without cracks No need for shielding gas Ideal for hard face equipment under heavy wear and impact: shovel and loader nails, grader blade tails, all kinds of hammers, railway central support, railway crushing pick, bucket edge, press molds, all kinds of jaw, conical and gyratory mills and so on. ..

NAWEL Abrasion Ultrahard NBS\r\nMF 2-GF-65-GR\r\nHardness 68-65 Rockwell C \r\nSingle pass and double pass welding\r\nTwo to five times stronger than chromium carbide\r\nNo need for shielding gas\r\nExcellent resistance to severe abrasion with earth or metal\r\nResistant to light impact\r\nExcellent resistance to wear with fine particles\r\nVery good welding due to the presence of nickel\r\nIdeal for hardface equipment exposed to wear with small particles and metal: spiral and sand screw, rubber and plastic industry cylinders, agricultural and mining industries, dredging equipment, slurry and ...

NAWEL Tool SKD6 MF 3-GF-45-GST Difficulty 55-50 Rockwell C Specialized welding wire for repair or hardface of tool steel equipment Hot and cold High toughness Excellent metal-to-metal wear resistance Excellent resistance to thermal fatigue up to 600°C Good machining and grinding ability Excellent ability for heat treatment and tempering Ideal for repair or hardface of all types of forging molds, cutting molds, press molds, die cast molds, injection molds, matrix sump molds, extruder spirals, cylinders and shafts, rolling equipment, types of rollers, rollers, pinch rolls, couplings, p ...

NAWEL Alloy 450\r\nMF 1-GF-45-GP\r\nHardness 48-45 Rockwell C\r\nTwo welding passes\r\nNo need for shielding gas\r\nWelding wire for repair and hard face of cold tool steel\r\nExcellent resistance to impact and metal to metal wear\r\nModerate abrasion resistance\r\nGood machining and loading ability\r\nIdeal for repair or hardface of all kinds of rollers, industrial rollers and bulldozers, crane wheels, couplings, sprinkler wheels, buckets, shafts and cylinders, rails, chains, gears and pulleys, guillotine blades, shredder blades, etc.

NAWEL Tool 400\r\nMF 3-GF-40-PT\r\nHardness 40-35 Rockwell C\r\nTwo welding passes\r\nNo need for shielding gas\r\nWelding wire suitable for repair and hardface of cold and hot tool steel\r\nContains nickel\r\nExcellent resistance to thermal and mechanical fatigue\r\nExcellent resistance to impact and metal-to-metal wear\r\nGood machining ability\r\nIdeal for repair and modification:\r\nForge mold and tools \r\npress tool\r\nreel\r\ngears\r\nRollers\r\nBulldozer wheel

NAWEL Tool 400\r\nMF 3-GF-40-PT\r\nHardness 40-35 Rockwell C\r\ntwo passes \r\nNo need for shielding gas\r\nWelding alloy without cracks\r\nSuitable for repairs and modification of hot and cold tool steel\r\nContains nickel\r\nExcellent resistance to impact and metal-to-metal wear\r\nExcellent resistance to thermal and mechanical fatigue\r\nExcellent machining and loading capability\r\nIdeal for modification and repair:\r\nForge mold and tools \r\npress tool\r\nreel\r\ngears\r\nRollers\r\nBulldozer wheel

NAWEL Tool 960\r\nMF 6-GF-55-GPT\r\nHardness 60-55 Rockwell C\r\nDouble pass welding\r\nNo need for shielding gas\r\nWeld free of holes and cracks\r\nExcellent metal to metal wear resistance\r\nVery good impact resistance\r\nRelatively hard machining\r\nSuitable for hard face and repair of hot and cold tool steel\r\nIdeal for repair and hardface:\r\nTypes of conductor rollers\r\nTypes of coupling\r\nTypes of stone crushers\r\nNails and edges of buckets\r\nTypes of pumps\r\nTypes of gears\r\nDredging equipment\r\nTypes of chains\r\nTypes of mixers

NAWEL Corrosion 410-SA\r\nUP 5-GF-40-C\r\nDifficulty 43-37 Rockwell C \r\nVarious number of passes\r\nSpecial stainless steel welding wire\r\nProduction in sizes 2.4 and 2.8 along with slag powder\r\nExcellent resistance to corrosion, abrasion and erosion\r\nBoil without cracks and inclusions\r\nGood machinability with carbide tools\r\nIdeal for repair and hard face of continuous casting rollers, steam turbine parts, impeller of centrifugal pumps and....

NAWEL Corrosion 414-SA\r\nUP 5-GF-40-C\r\nDifficulty 42-38 Rockwell C\r\nWelding wire under powder repair and hard face of stainless steel\r\nProduction in two sizes 2.4 and 2.8 along with slag powder\r\nEquivalent to improved 410NiMo stainless steel\r\nExcellent resistance to corrosion and thermal fatigue\r\nExcellent resistance to impact and metal-to-metal wear\r\nUnlimited number of passes without cracks\r\nGood machinability with carbide tools\r\nIdeal for repairing and hardfacing continuous casting rolls and hot rolling conductor rolls

NAWEL Corrosion 420-SA\r\nUP 6-GF-50-C\r\nHardness 50-47 Rockwell C\r\nStainless steel powder coated welding wire\r\nProduction in two sizes 2.4 and 2.8 along with slag powder\r\nExcellent corrosion resistance\r\nVery good resistance to wear and thermal fatigue\r\nBoil without cracks and inclusions\r\nGood machinability with carbide tools\r\nIdeal for repair and hardface:\r\nContinuous casting rollers\r\nTable rollers\r\nPinch rolls\r\nCoiler rolls in the hot rolling section\r\nPulp rotors

NAWEL Corrosion 410\r\nMF 5-GF-40-C\r\nDifficulty 43-37 Rockwell C\r\nUnlimited number of passes\r\nBoil without cracks and inclusions\r\nPowdered welding wire in size 1.6 (without the need for shielding gas and slag powder)\r\nSpecial for restoration and hard face of stainless steel\r\nExcellent corrosion resistance\r\nGood resistance to wear and erosion\r\nGood machinability with carbide tools\r\nIdeal for rebuilding and hardface: continuous casting rollers, steam turbine parts, impellers of centrifugal pumps, etc.

NAWEL Corrosion 414\r\n MF 5-GF-45-CPT\r\n Difficulty 42-38 Rockwell C\r\n Unlimited number of passes\r\n Equivalent to improved 410NiMo stainless steel\r\n 1.6 diameter welding wire (no need for shielding gas and slag powder)\r\n Contains nickel and molybdenum\r\n Boil without cracks and inclusions\r\n Good machinability with carbide tools\r\n Excellent resistance to frequent thermal stresses, corrosion and metal-to-metal wear\r\n Improving resistance to pitting and impact with tempering at 500-600 degrees Celsius\r\n Ideal for repair or hardface: continuous casting rollers\r\nHot rolling sec ...

NAWEL Corrosion 420\r\n MF 6-GF-50-C\r\n Hardness 50-47 Rockwell C\r\n Special for repair and stainless steel hardface\r\n Size 1.6 (no need for shielding gas and slag powder)\r\n Martensitic structure with good resistance to abrasive wear, metal-to-metal wear and thermal cracking\r\n High deposition rate without creating cracks and inclusions in the weld metal\r\nRelatively good machinability using carbide tools\r\nIdeal for repair or hardface:\r\nContinuous casting rollers\r\nYou hit the rollers\r\n pinch rolls\r\n Coiler rolls in the hot rolling section\r\nPulp rotors

NAWEL Plate Hard 60\r\nMF 10-GF-60-G\r\nHardness 60-58 Rockwell C\r\nChrome carbide\r\nTwo passes of welding\r\nVery high hardness and abrasion resistance along with low impact tolerance up to 300 degrees Celsius\r\nCompetitive quality and lower weight compared to foreign products (hardox, coard, etc.)\r\nAnti-wear plate welded with C grade welding wire\r\nThe material of the substrate sheet is steel st. 37\r\nThe dimensions of the sheet are 2 x 1 and 3 x 1.5 meters\r\nCan be produced from 6 to 12 mm thick\r\nUniform welding with automatic robotic device\r\nWithout any distortion\r\nBending an ...

NAWEL Plate Ultrahard 65\r\nMF 10-GF-65-G\r\nHardness 68-64 Rockwell C\r\nContains boron in the form of carboboride\r\nSheet welded with B grade welding wire\r\n2 to 5 times longer life than chrome carbide plates\r\nHigher quality and less weight compared to foreign sheets (hardox, coard, etc.)\r\nSingle pass and uniform welding\r\nUnderlayer sheet of st 37 steel\r\nCan be produced in dimensions of 2 x 1 and 3 x 1.5 meters and thickness of 6 to 12 mm.\r\nVery high hardness and abrasion resistance along with low impact tolerance up to 300 degrees Celsius\r\nWithout any distortion\r\nBending and ...

NAWEL Plate Ultrahard 67T\r\nMF 10-GF-65-GT\r\nHardness 68-64 Rockwell C\r\nUnderlayer sheet of st 37 steel\r\nWelding with BN grade welding wire\r\nContains niobium and boron\r\n2 to 5 times stronger than chrome carbide sheets\r\nHigher quality and less weight compared to foreign sheets (hardox, coard, etc.)\r\nSingle-pass and uniform welding with automatic robotic device\r\nHardness and resistance to severe scratch wear along with medium impact tolerance up to 550 degrees Celsius\r\nIn dimensions of 2 x 1 and 3 x 1.5 meters and thickness of 6 to 12 mm\r\nWithout any distortion\r\nCan be bent ...

NAWEL Tool 812\r\nMF 1-GF-45-PT\r\nDifficulty 44-38 Rockwell C\r\nSpecial welding wire for hot and cold tool steel repairs\r\nWelding without the need for protective gas\r\nWelding without cracks and with a high number of layers\r\nExcellent machinability\r\nGood abrasion resistance\r\nExcellent impact resistance\r\nWorking temperature up to 250 degrees Celsius\r\nIdeal for repairing all types of impact molds, presses, forges, punches, matrix seals, etc.