**[STB 3X 32 three-phase stabilizer 32 amperes] (https://www.automation24.ir/product-4015/stb-3x-32--%25D8%25A7%25D8%25B3%25D8%25AA%25D8%25A7 %25D8%25A8%25D9%2584%25D8%25A7%25DB%258C%25D8%25B2%25D8%25B1-%25D8%25B3%25D9%2587-%25D9%2581%25D8%25A7%25D8%25B2-32-% 25D8%25A2%25D9%2585%25D9%25BE%25D8%25B1%25DB%258C)**\r\n\r\n \r\n\r\n1. Suitable for 3-phase equipment and consumers alone\r\n2. Suitable for single-phase consumers installed in a three-phase distribution system\r\n3. It has a protection system against input and output voltage outside the permissible range\r\n4. It has a filter to protect consumer devices against noise and city electricity disturbances\r\n5. It has an audio alarm to announce overload\r\n \r\n\r\nFaratel STB 3X BLK three-phase stabilizer with a current of 32 amperes in each output phase can well protect three-phase industrial systems, precise laboratory devices, sensitive measuring devices, telecommunication systems, etc. against city electricity fluctuations and disturbances.\r\n\r\nIn addition, Faratel stabilizer has significantly increased the accuracy of consumer devices, and as a result, prolongs their service life and correctness, and prevents construction costs and wasted time. \r\n\r\nThe Faratel three-phase stabilizer device is designed and built in such a way that it adjusts and stabilizes the output voltage on 220 VAC for each phase, even during rapid changes in city electricity.\r\n\r\n \r\n**[Click here to view Faratel products.](https://www.automation24.ir/product/list/search?keywords=&in_description=1&category_id=0&inc_subs=1&manufacturer_id=102&pfrom=&pto=)**\r\n \r\n\r\n## The unique features of this device can be mentioned as follows:\r\n \r\n\r\n1. The device is equipped with a voltage stabilization circuit, so that it automatically detects the drop or increase in electricity and after stabilizing it, provides the appropriate voltage to the consumer.\r\n2. It is equipped with a protective system so that if the output voltage of each phase is more than 240VAC (input 275VAC) or less than 190VAC (input 140VAC) compared to zero, it will cut off the output of the stabilizer and disconnect it from the consumer devices against the illegal voltage. It provides protection and automatically connects the output power when the voltage returns to normal.\r\n3. It is equipped with a filter that removes the noise in the city electricity that causes disturbances in the operation of precise and sensitive devices and creates electricity free of any interference for the use of consumer devices at the output.\r\n4. It has a delay circuit in order to provide the appropriate voltage to the consumer in the event of a power outage, after the city\'s power fluctuations have been resolved.\r\n5. It is equipped with an audio alarm that sounds and warns when the device\'s load exceeds 25 amps in each phase. In this case, to stop the sound alarm, you must reduce the load. \r\n6. It has an input phase sequence detection circuit. In such a way that if the phase sequence in the input power is not observed, the output power will not be connected.\r\n7. If the consumer is a lamp, voltage stabilization during city power fluctuation is in the form of low light or full light of the lamp.
Qom