Cable RG8 marking F-Signal

**[New vibration controller] (https://feedercontrol.ir/product/%25da%25a9%25d9%2586%25d8%25aa%25d8%25b1%25d9%2584%25d8%25b1-%25d9%2581%25db% 258c%25d8%25af%25d8%25b1-%25d8%25af%25db%258c%25d8%25ac%25db%258c%25d8%25aa%25d8%25a7%25d9%2584-%25d8%25a7%25d8%25aa%25d9% 2588%25d9%2585%25d8%25a7%25d8%25aa%25db%258c%25da%25a9-s-f230d-f/)** with variable output adjustable vibration frequency \r\nBy setting the frequency in the resonant frequency range, the bowl made has the best output efficiency of the part.\r\nThis controller, by changing the frequency and voltage separately, has extremely large variations in the type of vibration of bowl and linear vibrations.\r\nEspecially in the pharmaceutical industry and very light and very heavy parts, changing the frequency is extremely effective. \r\n- Setting the frequency value from 40 to 100 Hz with an accuracy of 0.1 Hz\r\n- Setting the output voltage value from 0 to the supply voltage \r\n- Saving the set value and loading after connecting the power\r\n-Sensor input for automatic disconnection and connection and 2 separate internal timers on and off \r\n- Possibility of control through Modbus RTU network\r\n- The possibility of control through analog 4 to 20 mA or 0 to 10 volts\r\n- Ability to control current up to 3 amps\r\n- Unit temperature control and high heat cutoff\r\n-** [feeder site] (https://feedercontrol.ir/product/%25da%25a9%25d9%2586%25d8%25aa%25d8%25b1%25d9%2584%25d8%25b1-%25d9%2581%25db% 258c%25d8%25af%25d8%25b1-%25d8%25af%25db%258c%25d8%25ac%25db%258c%25d8%25aa%25d8%25a7%25d9%2584-%25d8%25a7%25d8%25aa%25d9% 2588%25d9%2585%25d8%25a7%25d8%25aa%25db%258c%25da%25a9-s-f230d-f/)** View control of other vibration controllers

**[Finder relay 4051.9024] (https://www.automation24.ir/product-1401/%25D8%25B1%25D9%2584%25D9%2587-%25D9%2581%25DB%258C%25D9%2586%25D8% 25AF%25D8%25B1-4051.9024)**\r\n\r\n\r\nWhat is a relay?\r\n\r\nIn a very simple way, it can be said that a relay is an electromechanical switch whose contacts change state when the coil is stimulated. Relays consist of two parts that are completely independent from each other. The first part, which is actually the relay coil, which can exist independently of the relay base or in a compact form, and the second part of the relay, which is the same as the relay base.\r\n\r\nToday, relays are widely used in the industry, relays are mostly used in control circuits, almost all devices used in the industry, either openly or covertly, use relays. Is. One of the advantages of the relay is that by using it, you can get a high power output with a very low power. In other words, it can be said that the relay is considered as an amplifier because the input with low current and the output with high current can be received from it. Depending on the type of construction, relays have 2 bases for feeding the coil and one or more COM blades (common), one or more closed blades (NC) and one or more open blades (NO).\r\n\r\n** One of the important applications of relays can be** in using the PLC output path. Because the PLC outputs that exist as relays inside the CPU, it is possible that if they are directly connected to the consumer, they may be defective due to current draw. As a result, the output of the PLC is connected to the coil of an external relay and the consumer is stimulated by the blades of the external relay. The good thing about this is that if something happens to the consumer, the external relay is damaged, in which case the relay can be easily replaced, but if the PLC\'s internal relay is faulty, it cannot be repaired easily. \r\n \r\n \r\n \r\n \r\n**[Click here to view Finder products.](https://www.automation24.ir/product/list/search/?manufacturer_id=8&pageItems=120)**\r\n\r\n\r\n\r\n\r\n\r\n## **Parts of the relay: **\r\n\r\nspring\r\nCoil to magnetize the blades\r\nContact blades\r\niron core\r\nNote) Relays used to be mostly made electro-mechanically, but today, with the advancement of technology, electronic relays, including SSR relays, etc., have also been made.\r\n\r\n### **Things to know when buying a relay:**\r\n\r\nRelay coil excitation voltage and current\r\nTolerable voltage of contacts\r\nThe number of blades\r\nAppearance of the relay

**[Atonix PRL18-8DP2 inductive sensor] (https://www.automation24.ir/product-38/%25D8%25B3%25D9%2586%25D8%25B3%25D9%2588%25D8%25B1-%25D8%25A7 %25D9%2584%25D9%2582%25D8%25A7%25DB%258C%25DB%258C-%25D8%25A2%25D8%25AA%25D9%2588%25D9%2586%25DB%258C%25DA%25A9%25D8%25B3- prl188dp2)** ## **main features:** ● 8 mm detection distance ● Cylindrical model ● Protected against changing positive and negative poles (three-wire DC type) ● Protected against overcurrent (DC type) ● IP67 degree of protection ● Increasing the level of protection of three-wire sensors against jamming ● Long lifespan and easy to use ● LED status display ● Suitable replacement for micro switch and limit switch **[Click here to view Atonix products.](https://www.automation24.ir/product/list/search?keywords=&in_description=1&category_id=0&inc_subs=1&manufacturer_id=3&pfrom=&pto=)** ### **Inductive sensor:** These types of sensors are non-contact sensors that work based on the change of induced current in a coil. In these types of sensors, an electromagnetic field is produced and the output of the sensor changes as the metal approaches. These sensors react only against metals. The operating distance of induction sensors mentioned in their main specifications is measured based on the use of steel, and if other metals are used than steel, the switching distance of the sensor will change. In the opposite table, the conversion coefficient of some metals is mentioned. For example, when an inductive sensor reacts against steel from a distance of 10 mm, the same sensor reacts against copper from a distance of 4.5 mm.

All the basic parameters of an industrial plant can be displayed digitally and stored on the computer, and whenever the relevant managers want, they can see them both in figures and diagrams. They can also control the process and connect to the PLC system and the Internet, or view and control remotely

Fater Rasanur company is the main and central representative of the production of all kinds of cables and accessories and network peripherals based on optical fiber under the Nira brand.\r\nNetwork cable is one of the transmission media that is used in wired networks in addition to optical fiber cable. There are different types of network cables that are used for different purposes. Network (LAN) or Ethernet cables are used to connect network equipment such as computers, switches, routers, etc. \r\n Types of network cables: Cat7a, Cat7\r\n- With PVC and LSZH coating\r\n- It has a flexible structure for easy installation\r\n- High resistance\r\n- Support for 10 gigabit bandwidth\r\n- Ability to produce with different coatings\r\n- Ability to produce in different colors

**[Finder relay 6013.8024 + socket] (https://www.automation24.ir/product-502/%25D8%25B1%25D9%2584%25D9%2587-%25D9%2581%25DB%258C%25D9%2586% 25D8%25AF%25D8%25B1-6013.8024--%25D8%25B3%25D9%2588%25DA%25A9%25D8%25AA)** What is a relay? In a very simple way, it can be said that a relay is an electromechanical switch whose contacts change state when the coil is stimulated. Relays consist of two parts that are completely independent from each other. The first part, which is actually the relay coil, which can exist independently of the relay base or in a compact form, and the second part of the relay, which is the same as the relay base. Today, relays are widely used in industry, relays are mostly used in control circuits, almost all devices that

We are at the service of respected applicants with different models of legal mobile card readers \r\nMaximum activation period is 12 hours\r\nCan be shipped nationwide with on-site payment service

Mobile card reader with the ability to talk, send SMS, invoice, receipt, accounting and call