Adhesive carton

Automatic electro-hydraulic barrier\r\n\r\nAutomatic electro-hydraulic barrier\r\n\r\nAriaz company as one of the best sources of production, installation and design of electro-mechanical and electro-hydraulic barrier systems, a very large and diverse range of the highest quality The products of this series of automatic crossings are available to valued customers. The products of this series are divided into three categories in Ariaz company, which can be supplied according to the needs of consumers. 1) Electro-hydraulic barrier products with the special technology of Ariaz company, relying on the experience of thousands of installation and implementation of barrier and automatic door systems, Ariaz company has produced a unique product with unique features, which can be boldly said in all The basic parameters are significantly superior to its competitors.\r\n\r\n\r\n\r\nThe real hydraulic system\r\n\r\nElectro-hydraulic systems are designed for high-traffic routes and due to low depreciation. and energy efficiency have been better considered. 5-year replacement warranty. No plastic and vulnerable parts in the hydraulic circuit. Intelligent flow control system. oil\r\n\r\nunique technology of clutch engine for roadblocks\r\n\r\ncontinuously working engine\r\n\r\nthree-stage protection system for the electric current of the engine to ensure the maximum safety of the engine\r \n\r\nHas a cooling system\r\n\r\n6-meter canvas\r\n\r\nProviding parts in the post-warranty period at a reasonable price\r\n\r\nUltra-smart control board with the ability to provide System errors\r\n\r\nConnectable and controllable from all access control systems (license plate reader camera, long board tag, ....) Axle with two bearings for lifetime operation\r\n\r\nExtremely strong and reinforced body in more sensitive parts\r\n\r\nCurry powder paint\r\n\r\nHigh distance range of remotes\r\n\r\n r\n\r\nDuring the warranty period, if there is a problem in any of the components of the roadblock, of course, if this problem is not caused by an accident, lightning strike, or severe electricity fluctuations, the desired part will be completely replaced. However, the control board system is fully supported against power fluctuations.\r\n\r\nThere is no worry about the failure of this system because all parts are industrially designed and manufactured to ensure durability and longevity during long years of operation. .\r\n\r\nIt is worth noting that all the parts used in this barrier are in accordance with international standards and none of them have been changed according to the wishes of the company or the manufacturer in order to comply with the design conditions of the system. Therefore, all the parts work with their proper standard, and therefore the lifetime of the whole system increases significantly.\r\n\r\nThe use of high safety factors more than 5 times guarantees that the parts of each system They are working with one-fifth of their nominal and actual power, so the rate of fatigue and damage of parts tends to zero, in addition to these points, the heating of oil and parts in this roadblock is at zero because it is 5 times the required amount of the system. The volume of hydraulic oil poured into the system is only one-fifth in each working cycle

## Revitalize your brake discs with Disca in-situ disc grinder: powerful, precise and durable!\r\nLooking for an affordable and hassle-free way to fix the vibration and roughness of your brake discs?\r\n\r\n** Disca in-situ disc cutter is an ideal solution for you! Using advanced technical specifications and a unique design, this device sharpens your brake discs with unparalleled precision and finesse, and significantly improves braking performance.**\r\n\r\nWheel brake disc surface wear, warping and pitting are all factors that have negative effects on car ride. Car brake discs lose their initial efficiency over time and get damaged. This is what makes us feel the sound of the brake disc when braking.\r\nThe friction between the brake pads and the disc may cause these vibrations and failure of the car brake disc, which are caused by many reasons, such as dust, environmental pollution, or rust on the disc surface. In many cases, after checking for repair or replacement of the brake disc, there is no need to replace it, and you can use a useful and efficient tool to fix these defects, which has been introduced to the world and Iranian market today. In the car repair shops, they can smooth the surface of the car disc with the help of an in-situ disc grinder so that finally the braking performance of the wheels returns to the desired state.\r\n\r\n### Outstanding technical specifications of Disca in-situ disc grinder:\r\n\r\n1. **Ability to use 220V single-phase electricity** to power the device and the ability to start the device head even with 12V car electricity\r\n2. All-alloy and impact-resistant steel structure: Disca uses the highest quality raw materials in the manufacture of its products, and no cast iron is used in the structure of the device.\r\n3. **Ability to grind the brake disc of all passenger cars, SUVs and semi-heavy cars**: This device can be used for a wide range of cars.\r\n4. **Using a ball screw**: This type of screw prevents the accuracy of the device from decreasing over time and brings smooth and silent operation.\r\n5. **Intelligent board to adjust the forward and backward speed**: Using this board, you can precisely control the precision of the lathe.\r\n6. **Ability to grind both sides of the disk simultaneously with accuracy and tolerance of 0.001**: This device has the highest level of accuracy in disk grinding.\r\n7. **Disc balancing feature with hub**: Using this feature, you can completely eliminate the vibration caused by disc imbalance.\r\n8. **Having an automatic cut-off sensor with a buzzer at the end of work**: This sensor ensures the safety of the user while using the device.\r\n9. Automatic, semi-automatic and manual grinding: This machine gives you the necessary flexibility to grind the disk in the way you want.\r\n10. **with cut-off sensor and E-Stop key**: These sensors are installed to increase safety during operation.\r\n\r\n### By choosing Disca in-situ disc cutter, you will benefit from the following benefits:\r\n\r\n**Cost Reduction**: Compared to replacing brake discs, DiscT

### ASTM A179 seamless steel tube\r\n### Outer diameter: 25.4 mm\r\n### Thickness: 2.11 mm\r\n### Length 12.10 meters\r\n### Made in: China\r\nThe weight of each branch is about 16 kg.\r\nEach bundle contains 169 branches of A179 steel tube.\r\n**The tubes are provided that they are manisman and the ability to send samples to accredited laboratories for determining the grade and chemical analysis.**\r\n\r\nJahan Tehzih Abdal Company, as one of the reliable suppliers in the field of industrial pipes and fittings, supplies A179 grade seamless steel tube. These tubes, with a standard length of 12.10 meters and made in China, are an excellent option for industrial projects that require high strength and durability.\r\n**To inquire about the price from our contact page, contact the sales experts.**\r\n\r\n----------------------------------------------------- ----------------------------------------\r\nLearn more:\r\n\r\nIn ASME B31.3 piping code, A179 steel pipe is defined as follows: \r\n**ASTM A179: Seamless, Cold-Drawn, Low-Carbon Steel, Heat Exchanger and Condenser Tubes**\r\n\r\nA179 grade seamless steel tubes are highly sought after due to their unique features, especially in sensitive industries such as oil and gas, petrochemical and power plants. These tubes, which are made of carbon steel, with uniform thickness and high resistance, are suitable for transporting hot fluids and high-pressure gases. Other important features of these tubes are corrosion resistance and high pressure tolerance.\r\n\r\n**Chemical compounds:**\r\nCarbon: 0.18 - 0.06\r\nManganese: 0.63 - 0.27\r\nPhosphorus: 0.048\r\nSulfur: 0.058\r\n\r\nAccording to the steel key, the grade equivalent to ASTM A179 is equivalent to the grade DIN ST35.8.\r\n\r\nOne of the most important features of this tube is its seamlessness. This feature has made Manisman A179 tube to withstand higher pressure and to be more resistant to corrosion and leakage. The thickness of the wall allows it to be used in high tension environments and thus it can be used in industrial fluid and gas transmission systems. The carbon steel material of this product, in addition to increasing its durability, makes it more resistant to temperature changes and harsh environmental conditions.\r\n\r\nIndustrial applications\r\nDue to its high quality and unique features, Manisman A179 tube is used in many sensitive industrial projects, especially in condensers and heat exchangers, utility services. This tube is suitable for transferring hot and high-pressure fluids and can play an important role in increasing the efficiency and safety of equipment.

Laser cutting and waterjet devices in different dimensions and sizes!\r\n\r\n**laser cutting machine:**\r\nCapacity: 1.5KW to 40KW\r\nTable dimensions: 2.5*1.25, 2*1.5, 2*3 and 2*6 \r\nSheet cutting ability: up to 100 mm\r\nCutting accuracy: 0.1 mm\r\n\r\n**Glass laser and wood laser devices** \r\nSuitable for engraving and cutting on glass, mirror and wood\r\n\r\n***Waterjet device:**\r\nPump power: according to the thickness of cutting\r\nTable dimensions: 2.5 x 1.5, 2 x 3, 2 x 4, and 2 x 6 \r\nSheet cutting capability: up to 100 mm\r\nCutting accuracy: 0.1 mm\r\nSuitable for cutting sensitive metals \r\n\r\nAll the mentioned devices have different types and are made according to your order.\r\nCall for more information.

Types of cooling towers, open circuit, closed circuit, cubic, circular, Abara designs with different capacities.

Steel sheet quality control system based on machine vision and artificial intelligence\r\n\r\n\r\nOne of the most important processes in the production of steel sheets is the identification and control of waste and defects on the sheet. The presence of any scratches, scratches, etc., causes a decrease in the quality and strength of the steel sheet, which in addition to reducing the competitiveness of the final product. In the target market, it will reduce the desire of the customer to prepare the final product. As a result, it is mandatory to carry out the inspection process in order to identify these defects. Visual inspection by the operator to identify these items during the production process always has many problems, including the impossibility of continuous and permanent inspection, the impossibility of seeing all the waste by the human eye, the fatigue of the human operator, etc. Meanwhile, the use of an automatic system can prevent the mentioned problems in addition to increasing the accuracy and speed of inspection. In this system, using artificial intelligence and image processing techniques, without human intervention, images are taken of the surface of the steel sheet, during their transfer, and based on the processing of the obtained images, the existence of any defect is identified and the type of defect, location and severity. It is stored and if needed, it is reported to the upper system in real time, so that, if necessary, it can reduce or eliminate them by controlling the mechanisms involved in the production process. Very high inspection speed and accuracy and no need to slow down the production line are the most important features of this system.\r\n\r\nBy photographing the surface of the steel sheet and using image processing and machine vision techniques, this system identifies existing defects without any interference in the production process, records the type of defect, their exact position and size and sends them to the system as information signals. It sends overhead (if available) which has a very high processing speed and can be implemented according to the needs of the employer in accordance with the width of the production sheets. \r\nThis system is able to identify the following defects with the indicated accuracy.\r\n1- Spot damage\r\n2- The impact of external matter\r\n3- Uneven galvanized layer\r\n4- spot spot (white)\r\n5- Folding\r\n6- alloy stains\r\n7- scratch\r\n\r\nBina Sanat Vira Company, a leader in the field of artificial intelligence and industrial machine vision in the country, is ready to build a steel sheet quality control system based on machine vision and artificial intelligence for steel sheet production factories.

Artaville Transformers Company is a familiar name in the food and dairy industries and one of the innovative companies in this field.\r\nRelying on modern knowledge and persistence in efforts, this company has been able to cooperate with big companies in the production of industrial machines and also won various honors and certificates.\r\n-Patent certificate of homogenizing pump device (MSA-HP)\r\nPatent certificate of yogurt filling machine (MSA-YC)\r\n- Licensed technology unit located in science and technology park\r\n- Obtaining the title of National Superior Technology Unit 1402\r\n-CE certificate\r\n- Certificate of I.M.S\r\n- ISO 9001 certificate\r\n- ISO 14001 certificate\r\n- ISO 45001 certificate\r\nTo see our other products, visit our site:\r\nhttps://msamobadel.com/

The CIP (Cleaning In Place) unit is an advanced central washing system designed to clean industrial production lines without the need to separate them. This system with a high level of automation and optimal energy consumption performs the washing process fully automatically and optimally. The fully automatic CIP unit has a function change system that can adjust the washing process based on the needs of different production lines. The use of CIP central washing system, especially in the food, pharmaceutical and chemical industries, improves the quality and hygiene of products and increases productivity and efficiency. Cleanliness of the environment in terms of health is very important in food and dairy factories. Therefore, factories should consider high standards for these conditions so that their output is completely free from viruses and contamination in terms of health. CIP systems can be used for fast, efficient and reliable cleaning of all processes in these types of factories.\r\nLink to additional specifications of this product in our blog:\r\nhttps://msamobadel.com/product/4--cip-.html