Grade 1 chicken finger filling rubber used in industrial slaughterhouses

A solvent-based spray that completely repels and waterproofs bathroom and toilet ceramic tiles, bathroom doors, and sinks (without any change in appearance) in an extremely effective way, in the shortest time, with high durability, resistant to temperatures of 30 - and +350 degrees Celsius is indirect and prevents destruction against sunlight and moisture with detergents.\r\nNote that the hydrophobic product can be used on oil paints\r\n\r\nTo make the surface hydrophobic before use, it is recommended to test it on a sample to familiarize yourself with the product.\r\n\r\n \r\n\r\nProduct volume 300 ml\r\n\r\nEach spray completely waterproofs a door\r\n\r\n \r\n\r\n \r\n\r\nHow to use:\r\n\r\n1- The desired surface must be clean, dry and free from any dust, oil and pollution.\r\n\r\n2- Use at a temperature of 10 to 35 degrees Celsius and without humidity.\r\n\r\n3- If you have just painted your door, it must have been 10 days since it was painted\r\n\r\n4- If your door is corroded, be sure to clean and repaint the surface before use\r\n\r\n5- If you plan to apply materials on ceramic tiles, make sure the work is dry and clean\r\n\r\n6- Spray the ingredients in a small amount on the surface and immediately spread with a microfiber towel (give circular massage.\r\n\r\n7- The sprays are not filled with gas, so there is no possibility of explosion.\r\n\r\nThe durability of these sprays (maintenance) in favorable conditions is more than two years.\r\n\r\n \r\n\r\nNote: The initial drying time is 4 hours and the final drying time is 30 hours.\r\n\r\nNote: If your door is not healthy (damaged or inflated), be sure to clean and healthy the surface before implementation.\r\n\r\nThen use this spray\r\n\r\nIt should not be wet on the work surface until it is completely dry.\r\n\r\n \r\n\r\nTo order through the purchase link or call 09127650471 and 02155162527

Manufacturer of all kinds of plastic pallets with more than half a century of experience\r\nwith grade 1 and grade 2 petrochemicals\r\nWith a load of 3 tons\r\nWeight 16 kilos

sack\r\nPlastic sack rolls are made of different materials. Two polymer materials called polypropylene and polyethylene are used in the production of this roll. To produce plastic rolls in factories, they may use polypropylene or polyethylene, or in some cases use both of them.\r\n\r\nPlastic sack rolls are made in two forms, simple and laminated. In the simple type of this type of sack, the pp strings are woven and interwoven in the form of warp and weft by means of a spinning machine. In the case of laminate, these fabrics are covered by a thin layer (mixing 95% PP and 5% PE) and the pores between the warp and weft of the fabric are closed in this type of roll.\r\n\r\nRolls are divided into different types according to how much they are resistant to moisture and water. Here are the types of roll sacks:

Sale of plastic sacks in different sizes\r\nProduction of different quality plastic sacks\r\nPlastic bag at a very reasonable price\r\n\r\nPreparation and distribution of different types of bags and sacks from the size of 30 cm to the size of 4 meters is done. These sacks are plastic and are available in waterproof, plain, laminated, etc.\r\nThis plastic bag can be used as rice bag, cement bag, flour and sugar sack, etc.\r\nWe are at your service by producing sacks and selling plastic sacks at a very reasonable price.\r\nFor more information about products and prices, contact the listed numbers.