Garlic powder line

Garlic powder line

• The peeler separates the skin of garlic dry with the help of compressed air with a capacity of approximately 400 kilos per hour.
  * The garlic clove machine cloves garlic dry with a capacity of approximately 400 kilos per hour. All parts In contact with materials, it is made of stainless steel and the machine is made with food conditions.
  * The garlic slicer machine has an approximate capacity of 300 kilos per hour. All parts in contact with materials are made of stainless steel and the machine is made with food conditions. (if needed)
  * Tray-type garlic drying oven that can be used in the drying process has 24 or 48 stainless steel 304 trays. All surfaces of the oven are covered with stainless steel sheets from the outside and inside. It has a fan, heating element, air inlet and outlet valve (controllable), air guide vanes and temperature control devices such as a digital and hand thermostat thermometer and the maximum controllable temperature in the oven is 250 degrees.
  * The way our shin works is that the materials poured through the entrance opening are guided into a chamber that has a rotor with stainless steel blades that are smooth on one side and have a relatively sharp edge on the other side. The rotor rotates relatively high. After grinding, it passes the material through a mesh screen with holes of desired diameter and discharges inside the barrel. The rotation direction of the rotor (left or right) can be controlled by the operator. The rotor has a speed of 3000 rpm. The construction of the machine is such that it can be opened easily and washing and changing the mesh screen can be done easily. The machine is located on a wheeled mobile chassis, where the barrels up to 880 mm high are placed under the outlet opening (the above size can be changed depending on the order). In addition, the mesh screen of the machine can be made from 100 mesh to 10 mm hole. Capacity is 1000 kg per hour. The rotor has 16 blades. Motor power is 5 kw. Horizontal spiral powder transfer system clt100 for Transferring the powder from the mill to the inlet of the filler powder at a height of 2200 mm, made of stainless steel,
  * powder packing machine in envelopes for packing all kinds of soft and sticky powders in cellophane and aluminum foil. The envelope has three thermal seams, one in length and two in width. The biggest advantage of the machine compared to similar types of cellophane is the movement of cellophane by transverse sewing jaws. By this means, the operation of transverse flooding is done while the cellophane is moving, and the machine has a higher speed. It is compared to the types of machines that provide movement with rubber rollers. In addition, the accuracy of the dimensions of the envelope and the quality of the stitches are much higher. The speed can be changed mechanically and continuously, and the machine is also equipped with an electronic eye to accurately adjust the location of the stitches. In case of order, it is possible to install a fully automatic date machine to print three lines on cellophane. Usable roll width 500 mm Envelope width 40 to 230 mm Envelope height