25 mm (3.4 inch) polyethylene pipe with working pressures of 6, 10, 5.12 and 16 atmospheres and is produced in the form of coils and in lengths of 100, 200 and 400 meters. 25 mm polyethylene pipe ( 3.4 inches) with working pressures of 6, 10, 5.12 and 16 atmospheres and is produced in the form of coils and in lengths of 100, 200 and 400 meters.\r\nFor connecting pipes with a diameter of 25 mm to each other or other better parts Polyethylene rib joints should be used, and due to the thinness of the pipe wall, it is not recommended to weld them.\r\nUse of 25 mm size polyethylene pipe: \r\nGas 25 pipe is used to branch off the gas piping, which must be Pay attention to the yellow line on the pipe, because this line indicates the use of polyethylene pipe for gas transmission. Be sure to use electrofusion fittings to connect gas pipes.\r\nTo cover electric and telecommunication cables to protect them, in this case, since there is no pressure on the pipe wall, use a standard unsealed pipe.\r\nOne Another use of pipe 25 is to transfer water and poisons to crops in greenhouses, agricultural fields and gardens. Our suggestion is to use standard and sunlight-resistant tubes in this field
Tehran
