Thin layer gypsum coating, polished coating
To achieve the best result in painting, after sealing operation and before painting, a thin coating layer (1 to 2 mm) with mastic is implemented on the entire surface. The implementation of this layer covers possible waves in the entire work surface and creates a smooth and uniform surface on the panel.
Usages
This product is used to create a smooth surface and prevent the appearance of light and shadow and the appearance of seams (which is the result of the difference in the type of materials under the paint), after the sealing operation and before painting. It works.
Instructions for execution
Preparation and method of use
To prepare mastic, first pour enough water without salts in a clean container and then gradually and slowly pour the product into the water as a spray (per 12 to 14 liters of water are needed for every 20 kg of powder) after adding the powder to the water, wait 2 to 3 minutes until the powder is completely soaked in water. Then do the mixing. After the mortar is formed, wait for 30 seconds and then continue mixing until a uniform mortar is prepared. Apply the prepared mortar with a trowel or trowel as a thin layer to the desired thickness on the plaster coated plates.
Executive points
The temperature of the environment and the desired work surface should not be lower than 5 and higher than 40 degrees Celsius.
The work surface should be cleaned of any pollution, dust and oil before implementation.
r\nWork tools and containers used for mixing must be completely clean.
When the mortar starts to set, water or powder should not be added to it.
Effective factors in strength
The presence of any impurity such as salt or plaster or the use of high temperature water will reduce the working time and mortar strength.
The amount of consumption
The amount of mastic used to cover 1 square meter of surface with a thickness of 1 mm is approximately 800-1000 grams per square meter.
Packaging information: 20 kg bag
Storage conditions Storage: The bags should be stored in a dry place, on pallets, away from moisture and direct sunlight. Expiry date: 6 months after production and 7 days after opening the bag.
Company | اباد بنا |
---|---|
Tel | +98 21-4×××9722 |
Mobile | +98 920×××2714 |
Whatsapp link | |
Instagram page | |
Telegram | Telegram link |
Website | http://abadbana.com |
Country | Iran |
Province | Tehran |
Address | پونک خیابان میرزابابایی پلاک ۸۷ |