Festo pneumatic care unit

Festo pneumatic care unit

Compressed air pneumatic care unit Some characteristics of Festo compressed air pneumatic care unit Usually in simple system applications dusting suspended particles in compressed air up to 40 microns and humidifying up to 40% by the care unit is sufficient.

But this dust removal can be done up to 0.01 micron and moisture can be removed up to 99.9% of the compressed air.

The system forming the care unit:\r \n
One compressed air regulator

One water and dust filter

One oiler


\r\ As mentioned before, based on the type of use such as food and pharmaceutical industries, dust particles up to 0.01 microns can be captured

and with the help of products such as filter membranes, moisture can be absorbed up to 99.99%. to introduce clean air into the system.

It should be said about the preparation of compressed air, no matter how much we try to clean the compressed air needed for automation systems,
\r\ n We extend the service life of valves and cylinders to the highest level. D series, but about Festo brand care unit, it should be said that this product is offered in different models, one of the most famous of which is the D series care unit.
\r \nFesto care units are designed and produced in four types: Micro, Mini, Midi, Maxi.

The mini unit is available in 1/8, 1/4, 3/8 inch sizes.\r\ n
The flow through the 1/8 inch unit is 700 liters per minute, 1/4 inch is 1000 liters per minute and 3/8 inch is 1200 liters per minute.


\r \nMIDI units are available in 3/8, 1/2, 3/4 inch sizes. Flow through the 3.8 inch unit is 2000 liters per minute, 1.2 inches is 2600 liters per minute and 3.4 inches is 2600 liters per minute. Available in 1/2, 3/4 and 1 inch sizes. The flow rate of the 1/2 inch unit is 7600 l/min, the 3/4 inch unit is 8300 l/min and the one inch unit is 8500 l/min.
The new generation of MS series wind care unit by Festo brand
Size MSB6 and MSB4 The two most used sizes of this series are the care units. MSB4 size can be provided in 1/8 and 1/4 connection sizes and MSB6 in 1/4, 3/8 and 1/2 inch connection sizes.



This Festo care unit series can also be ordered in a three-piece model:

Filter
One of the components of compressed air filtration which is responsible for catching dust, dust and moisture entering the line.

This filter can be provided in 0.01, 1, 5, 40 micron cartridges.

Water And the air pollution collects at the end of the bowl, which is emptied both manually and automatically. Regulator is a part that adjusts the pressure according to the user's needs. A pressure gauge is installed on the regulator, which displays the pressure level.

Oilator
This part cleans the air out of the filter for use in actuators and mechanical parts that are exposed to air. are compressed, it lubricates.

The purpose of using compressed air equipment in compressed air lines:
It increases the life of parts and equipment.
159604 FRC-1/8-D- MINI
159608 FRC-1/8-D-MINI-A
186497 FRC-1/4-D-MIDI
186500 FRC-1