composite facade executive

composite facade executive

Types of implementation methods of composite view. Every project can have a different implementation method depending on the type of plan and execution location.
In the fix method, after cutting and groove, the composite sheets are permanently attached with screws or rivets to the aluminum or iron substructure, the installation process of which is very fast. In the fix method, two types of aluminum and iron substructures can be used. The cost of implementing this system is lower. The method of installing and assembling this system is easier.
For the use of iron infrastructure, the best and most suitable profile in terms of quality and price is the 40x40 mm2 can profile. Substructure in metal structure buildings is done directly and in concrete structure buildings with rolled bolts and hammered plates. Hanging method: Hanging means hanging. In this The method is mostly used for panels of the same type and with a fixed size.
In the Hang method, iron profiles of 40x80 are usually used, and these dimensions can be changed. Aluminum panels are placed together in the form of rails (aluminum brackets or studs) and after the composite sheet is cut and bent, they are placed on these brackets. These rails are also adjustable. First, iron corners are connected to iron profiles, and aluminum corners are used on these iron corners, and then the aluminum bracket (gutter) is connected to the iron profile. In fact, aluminum corners hold the role of aluminum brackets and the brackets hold the role of composite panels. One of the advantages of this method is mechanical sealing that does not require the use of rubber and silicon glue. The speed of execution in this method is also high and it is possible to adjust the holding structure of the composite sheet. Another advantage of this method is its insulation against cold and heat and its high resistance against earthquakes, and due to the fact that the panels are railed, it is possible to replace them after installation, for the composite facade. One of the disadvantages of the Heng method is its high cost. H and L method (Hashabi): The Hashabi method does not meet the necessary global standards and is not a resistant method against environmental factors and under no circumstances. The conditions are not sealed, which is why it cannot be implemented in windy and rainy climates. In this method, aluminum panels are only cut and grooves are not made on them, and after the iron foundation and the installation of the magazine on the box, the panel The cut pieces are placed inside the magazine. In the corners of the composite panels, they use L-shaped corners, and in the middle of the composite panel, they use H-shaped corners, and in the corners of the wall, they use V-shaped corners, which also play the role of sealant.
More than this method, in arched designs It is not possible to cast the panels. It is possible to replace the composite sheet after installation in this method, and one of the advantages of this method is the very high speed of installing the composite sheet. In this method, the installation fee is lower, but the cost is lower. Corner or shelves are added to the price.