Wall heater unit manufacturer

Wall heater unit manufacturer

What is a unit heater? The ceiling or wall unit heater is a very high efficiency heating unit that produces heat by injecting hot water, steam inside the coils or by an electric element through the current of electricity. The unit heater unit is used in the cold seasons of winter and autumn to create heat and reach the desired and desired temperature for use in sports halls, gymnasiums, production halls and high-altitude public places. The ceiling heater unit is considered one of the most practical heating systems in the ventilation and heating systems industry, and it is very popular due to its appearance and power of heat generation and suitable air ejection. It can be designed and manufactured as wall, ceiling and standing. In general, the heater unit consists of a cabin with air guiding feathers, a coil and a propeller that circulates the air flow. Application of Unit Heater heating system: Unit heaters are used for heating and supplying heat to production halls, swimming pools, sports halls, drug storage warehouses, industrial workshops and large and small factories. Of course, you should keep in mind that unit heaters can be The fluid that flows in the coils of the device can be different, and according to the possibilities of the desired project, hot water, steam and hot oil can be used for the heating coil. Of course, in the hot water heater unit, due to the lower working pressure, coils with copper pipes of appropriate thickness are usually used, and in the steam and hot oil heater units, due to the higher working pressure, it is preferable to use coils with Manisman pipes or Steel should be used. The coils used in order to transfer heat to the environment in the best possible way are covered with aluminum fins, and the density of these fins is 8/10 or 16 fins per inch, which is an issue in the performance of the unit. The heater is very effective. How the heater unit works: In the unit heater, to produce heat, it is necessary that the fluid with the desired temperature passes through the coils of this type of heater and heats up the fins of the coil. (As mentioned above, this fluid can be hot water, steam or hot oil, these items are delivered to the heater unit through piping that can be from the central engine house or piping through hot oil or steam in the process) After the fins of the coil are heated, a suitable air flow is created so that the heat from the surface of the fins is distributed in the desired environment. To create the air flow, an axial fan is used. This fan can be a blower or If it is suction, it is selected with 1400 and 900 revolutions. When necessary, it is recommended to use a 900 revolutions fan to reduce the sound production, so that the sound produced in the work environment is not annoying. Jerry