Cooling tower parts

Cooling tower parts

Cooling tower parts as consumables of this device should be regularly maintained and replaced if necessary in time. Cooling tower parts or spare parts of cooling tower include various items that The most important of them are the following: 1- Cooling tower packing 2- Cooling tower dripper 3- Water distribution and cooling tower nozzles 4- Tower propeller and fan Cooling 5- Reducing the cooling tower speed 6- Cooling tower louvers and ..... For more details and information of each of these parts, refer to Azin Tahvieh website. https: //www.azintahvie.com/ Also, to purchase the required items, call 09194201355 and benefit from free prices and advice.

Summar briefly below Explained Cooling tower drip (DIRIFT ELEMINATOR): Cooling tower drip, also known as drift eliminator or drift eliminator, are parts of the cooling tower that are used to remove water droplets. From the air and minimize water loss within the Tara cooling tower cycle They are alive. Using a cooling tower dripper causes water droplets and airflow to suddenly change direction. This process causes the water to separate from the air and return to the cooling tower.

Cooling tower nozzle: What is the cooling tower nozzle used for? Cooling tower nozzles are mostly used in cross-flow cooling towers because they use gravitational flow distribution pools. In these towers, the water enters the water distribution basin, which is located above the packings; It is then sprayed down through the nozzles of the cooling tower which is installed at the bottom of the pool. In some cooling towers, water is distributed directly through the pipelines above the cooling tower and then by the nozzle or the nozzles of the cooling tower. The can, which is placed on the pipe at regular intervals, is sprayed on the packings. Cooling tower nozzles are made of different materials, the main of which are PVC, polypropylene and ABS. But in high number orders, customer demand for choosing the type of nozzles is our production priority.

Cooling tower fan:

Cooling tower fan to create flow Air is used along with the necessary pressure and diffusion of this air flow throughout the cooling tower. Cooling tower fans should be designed to be highly resistant to the corrosive effects of the environment in which they operate (water or other corrosive materials). Due to the large size and power of these fans, they usually make a lot of noise. But there are also special types of low cooling tower fans. This functional part of cooling tower is used in various types of cross-flow, cross-flow, induction / forced flow cooling towers. Natural flow cooling towers do not require a fan because they use natural air flow and various processes that cool the water. The amount of aeration of the cooling tower impeller depends on the fan diameter, the number of blades and the rotation speed of the impeller. The material used to make the cooling tower fan is made of durable and lightweight materials. In smaller dimensions up to 120 cm in diameter, polypropylene material is used to make the fan, and for sizes higher than 120 up to 600 cm in diameter, fiberglass and aluminum materials are used.