Damper Actuator Damper Actuator

Damper Actuator Damper Actuator

in the ducting system for large residential buildings, commercial complexes, commercial parking lots, factories, pharmacies, and any other environment where there is a need to continuously adjust the flow rate of different areas of air dampers with the ability The adjustment is used by the damper motor. These motors have different types that are used for their specific applications: 1- Three-position motors with On / off mechanism: This model of motors is the most common type They are motors and are used to open and close air dampers to disconnect and connect an air path. These motors can be controlled by a thermostat, control panel, PLC, pressure sensor or a normal on / off switch. The opening and closing angle of the damper can be adjusted with a potentiometer. This motor model is used for cases where the temperature or pressure of an environment needs to be adjusted more precisely. These motors can be controlled from thermostat, pressure sensor, PLC, with gradual output (0-10 volts or 4-20 mA) or potentiometer 3: Engines disconnected and connected with spring mechanism: This model of motors to They are opened by the electric current and closed by the spring force in case of power failure. Uses of this engine model are for diesel dampers for diesel generators, air conditioners, smoke control dampers and industrial projects. 4: Fire Damper actuators: This engine model, as its name implies, for Fire control is used. In this way, in ducting systems, when passing through a firewall, or passing a canal from one environment to another with different conditions, fire dampers should be used, which are used in the motor type of this model of dampers.

Motors are available in two types: 24V and 220V

*** Honeycomb motors are available in 24V models in Iran, and are usually used for air conditioning systems. Siemens damper motors are available in two types of 24 and 220 volts and are used in commercial and industrial systems (air conditioners, ducts, fire dampers, etc.)

• Damper motors in different powers (torques) They are made that these powers are known in European and Middle Eastern orders in units of Newton meters (nm) and are slightly different in different brands. Typically the torques are as follows: 18-16-15-12-1(At the bottom of the ad)Nm - some of these torques are available in each brand Other models of motor damper are also available, which have different prices depending on the brand Exclusive representative of damper motor and Lufberg thermostats in Iran

WhatsApp Technical advice: (At the bottom of the ad)

Phone: (At the bottom of the ad)

(At the bottom of the ad)

Email: mailto:hamed.he@gmail.com