Shayan Materials

Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش as قندانی and استکانی in sizes 11 to 16 in quality, 65%, and -75% to -85% and 95% can be for more information with the unit sale of the company to issue 03136644312 contact please. Nozzle تاندیش the direction of outflow of the melt from تاندیش (cauldron of the middle) to the inside of the mold copper (کریستالیزاتور) machine continuous casting.That based on the time of casting, temperature, and conditions there melting % زیرکونیای(اینزرت) and analysis of the bricks in it are different. Brick and اینزرت zirconia, typically with different percentages of alumina can be made in two types of meal and drink. in the type of drink due to the lack of push presses from the analysis, the better and stronger, in order to cope with the melt used. Gap created between the اینزرت zirconia bricks can be used with presses up to each other with a sealing grout. part of the brain (اینزرت ) inside the bricks of ceramic (zirconia) is the pressure and temperature of the top of the melt, it is well tolerate . According to the conditions of the melt percent, اینزرت used normally from 65% to 95%. Nozzle تاندیش for use before the melt should be from both sides (the inside part of the تاندیش ) and اینزرت from the outside good ago be heated, because in the event of non-compliance with this point, causing shock, seeing the nozzle and breaks down the brick or leave, removal, or filling the lips, اینزرت . Before تحلیه melt in تاندیش inside the duct nozzle تاندیش from the sand, refractories such as chromite, fill, slag, and other impurities enter the melt نشضود and melted, under controlled conditions, واردقالب. Brick and اینزرت nozzle تاندیش in the form of there are different also based on the speed of casting and the dimensions of the mould hole diameter part zirconia is also changed . According to the different seasons of the year due to a drop in the temperature of the melt diameter اینزرت زیرکونایی also change . Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش in the model, قندانی and استکانی in sizes 11 to 16 can be, if needed, with دفترفروش the company to issue 03136644312 contact please . Nozzle تاندیش on the floor of the تاندیش located, and the number of packages to نعداد casting lines. Also, due to the amount of tonnage of steel castings, the percentage of zirconia and alumina ولبلوک is changed . According to the cross sections of billets, casting, and the conditions of melting can be the diameter of the nozzle تاندیش the direction of outflow of the melt determined . The quality of the zirconia used in the nozzle تاندیش very important because it increases or decreases the speed of casting can be, which eventually causes the tearing line of the casting and stop. Nozzle تاندیش to a few models, is consumed . 1 - nozzle تاندیش قندانی with zirconia all the 2-nozzle تاندیش استکانی with zirconia half height 3 - nozzle تاندیش with zirconia all the 4 - nozzle تاندیش all zirconia The nozzles in two models of Percy and مونتاژشده with the mortar green . ولبلوک the nozzle, both round and rectangular are available. ولبلوک nozzle تاندیش due to the amount of tonnage of steel castings made with different percentages, alumina available .

Chromite Sand Chrome Nozzle Patio Sliding Valve System : NAOZZLE Filling Compound (NFC) A) Chromite: 1) - Reduces production costs 2) - Increases the safety factor of the sliding valve system 3) - Spontaneous opening of more than 98% of the duct and No need for oxygen lance 4) - Increased safety factor of the operator 5) - Prevention of drop in melt temperature due to early opening of the valve 6) - No formation of non-metallic impurities and oxides and no entry of oxygen into the melt 7) - Application on the plates of the sliding gate pot and tandish system b) - Instruction and method Consumption 1) - Before using the sand, the duct valve should be completely cleaned of slag and sludge. 2) - The sand of the duct should be heated to 120 ° C before use. Heat to remove moisture. 3) - Move the sand through a sliding guide hole into the sliding valve hole and make sure that the volume of sand is about twice the volume of the nozzle chamber. 4) - Before emptying the melt from the furnace into the pan to be careful not to hit the sand dune. 5) - The properties of the sand should be such that after emptying the melt From the furnace into the ladle, a thin sintered surface layer is formed on the hill surface on the mantle discharge channel of the ladle. And the melt is automatically removed from the pan. 6) - After casting, first the slag and the remaining melt in the pan is removed and then the nozzle is cleaned with an oxygen lens and ready to be filled with sand for melting The next grinding is done. Salim Sanat Sepahan Company is one of the producers of chromite sand. Approved by a large number of esteemed consumers and is being sold and consumed. The grade is 33% chromite. In addition to domestic consumption, it has recently been exported abroad. One of the unique advantages and features of the product of this company is 100% opening rate, which according to the announcement of some esteemed customers and consumers, is very similar to the foreign type. It is necessary to explain that this product is being consumed in 5 to 140 ton pots. 1- The amount of melting residue inside the pan 2- The capacity of the pan 3- The presence of a process plug for blowing from the floor 4- The diameter of the inner nozzle duct Slide gate pot 5- Working temperature 6- Melt composition 7- Existence of LF in the steelmaking process Manufacturing company and Danesh Bonyan Salim Sanat Sepahan, a producer of chromite sand in the pot duct, announces its readiness to supply to steel mills by continuous casting method. For more information, please contact the sales unit at 03132374601. Production with quality from us and consumption with confidence from you. Thanks: Management of Salim Sanat Sepahan Company

Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش with excellent quality. That in size and quality, ranging from 60 to 95% zirconia to be provided. Nozzle تاندیش on the floor of the تاندیش located, and the number of packages to نعداد casting lines. Also, due to the amount of tonnage of steel castings, the percentage of zirconia and alumina ولبلوک is changed . According to the cross sections of billets, casting, and the conditions of melting can be the diameter of the nozzle تاندیش the direction of outflow of the melt determined . The quality of the zirconia used in the nozzle تاندیش very important because it increases or decreases the speed of casting can be, which eventually causes the tearing line of the casting and stop. Nozzle تاندیش to a few models, is consumed . 1 - nozzle تاندیش قندانی with zirconia all the 2-nozzle تاندیش استکانی with zirconia half height 3 - nozzle تاندیش with zirconia all the 4 - nozzle تاندیش all zirconia The nozzles in two models of Percy and مونتاژشده with the mortar green . ولبلوک the nozzle, both round and rectangular are available. ولبلوک nozzle تاندیش due to the amount of tonnage of steel castings made with different percentages, alumina available . Percent zirconia nozzle تاندیش استکانی model Indian 96%. In the factory, the company Selim industry sepahan line preparation nozzle تاندیش created where the nozzle تاندیش with different sizes assembled . Prices nozzle تاندیش reliable supply by the company is competitive and has its quality guaranteed. This company is ready to send nozzle تاندیش in the trial to the factory of production of steel ingot brosh continuous casting. This nozzle تاندیش in the method of production of steel ingot as a continuous casting – continuous used گیردند.

Hello\r\nManufacturing unit\r\nCasting and machining department of #Mehrad_Sanat_Sinad complex\r\nWith the latest technology and casting equipment, machining and hard work, he is ready to sign contracts with companies, organizations and groups related to the cement, lime, coke, and mineral processing industries.\r\nThis unit has 5 ton and 3 ton induction furnaces, as well as a 6 ton furnace, which has the ability to cast cast iron parts up to 25 tons and steel and alloy parts up to 15 tons as a single piece, and the diameter of wheels and rims up to 4/ supports 5 meters, this unit has automatic and laser molding and is equipped with a material laboratory. Friends who need casting parts with high weight or thickness can place their orders, after the casting stage of the desired part in Carousels with a diameter of 3, 4 and 5 meters are machined and geared, please contact us to arrange a visit to sign a contract and place an order.\r\nThanks to the search team.

Manufacturer and supplier of cast iron and ductile ingots with export analysis

Danesh Banyan Haya Shimi Razi Company produces various grades of casting wax in Iran

⭐Qoqnos production group⭐\r\n3D modeling and design\r\nCasting of industrial parts, chandeliers and decorations, statues, fittings, medals, rings, logos, ornaments and...\r\nMaterials are silver, brass, aluminum\ r\nProduction of all kinds of lighting\r\nChandeliers, lampshades, candlesticks and decorations\r\n09191771535\r\n09190221003\r\nKakavand

Selling microsilica at the price of 6000 Rials per kilo. What is microsilica? This material is a byproduct of the production of special metals in electric arc furnaces.