Design and implementation of boards, psyche, and LED fixture

The main purpose of using a gland in the connection of cable and distribution box is to create complete safety for the cable and connections against vibration and external forces in order to prevent their damage and tearing, as well as the installation of the gland causes complete sealing of the joint, against the penetration of moisture and gases. Flammable is divided into boxes.  Advantages of using Glandcable: • Management of cables • Safe transmission of wires and cables • Neutralizing the pressure and vibration applied to the cable • Prevent dust from entering

**[miniature switch C60N single bridge 32 amp Spectre with cutoff curve c code SE-24406] (www.automation24.ir/product-3965)** Specter single-phase miniature switch 32 amps type C: Regarding the miniature switch, it can be said that the fuse is a protective device that is used in electrical equipment and circuits so that when the current exceeds the permissible limit, the circuit is cut off so that other equipment is not damaged. ## Miniature keys use two mechanisms for their operation. Bitmal function for overload protection Magnetic function for short circuit protection Miniature switches are divided into 2 single-phase and three-phase parts in terms of the number of bridges, and in terms of the cut-off time, they are divided into fast and slow working conditions. They are also divided into K, D, C, B and Z types in terms of application. Type B miniature switch: This type of miniature switch is mostly used in the home and cuts off the overload current between 3 and 5 times the rated current in a certain time. These types of switches are considered fast-acting.

**[miniature switch C60N single bridge 16 amp Spectre with cutoff curve c code SE-24403] (www.automation24.ir/product-3962)** Specter single-phase miniature switch 16 amps type C: Regarding the miniature switch, it can be said that a fuse is a protective device that is used in electrical equipment and circuits to cut off the circuit when the current exceeds the permissible limit so that other equipment is not damaged. ## Miniature keys use two mechanisms for their operation. Bitmal function for overload protection Magnetic function for short circuit protection Miniature switches are divided into 2 single-phase and three-phase parts according to the number of bridges, and according to the cut-off time, they are divided into fast-acting and slow-acting states. They are also divided into K, D, C, B and Z types in terms of application. [Click here to view Specter products.](https://www.automation24.ir/product/list/search?keywords=&in_description=1&category_id=0&inc_subs=1&manufacturer_id=105&pfrom=&pto=) Type B miniature key: This type of miniature key is more

**[miniature switch LS single phase 16 amp type C] (https://www.automation24.ir/product-1698/%25DA%25A9%25D9%2584%25DB%258C%25D8%25AF-%25D9%2585%25DB %258C%25D9%2586%25DB%258C%25D8%25A7%25D8%25AA%25D9%2588%25D8%25B1%25DB%258C-ls-%25D8%25AA%25DA%25A9%25D9%2581%25D8%25A7% 25D8%25B2-16-%25D8%25A2%25D9%2585%25D9%25BE%25D8%25B1-%25D8%25AA%25DB%258C%25D9%25BE-c)**\r\n\r\nminiature key:\r\n\r\nRegarding the miniature switch, it can be said that the fuse is a protective device that is used in electrical equipment and circuits so that when the current exceeds the permissible limit, the circuit is cut off so that other equipment is not damaged.\r\n\r\n## **Miniature keys use two mechanisms for their operation.**\r\n\r\nBitmal function for overload protection\r\nMagnetic function for short circuit protection\r\nMiniature switches are divided into 2 single-phase and three-phase parts in terms of the number of bridges, and in terms of the cut-off time, they are divided into fast and slow working conditions. They are also divided into K, D, C, B and Z types in terms of application.\r\n\r\nType B miniature switch: This type of miniature switch is mostly used in the home and cuts off the overload current between 3 and 5 times the rated current in a certain time. These types of switches are considered fast-acting.\r\nC type miniature switch: This type of switch is mostly used in industry and cuts the overload current between 5 and 10 times the rated current in a certain time. This type of switch is considered a slow-acting type.\r\nD-type miniature switch: This type of switch is mostly used in certain industrial applications such as transformers and cuts the overload current 10 to 20 times the rated current.\r\nK type miniature key: This type of key is used in transformer and engine. It is usually between types C and D.\r\nZ-type miniature switch: This miniature will issue a cut-off command at a specific time when the passing current exceeds the rated current. This key is used in very sensitive circuits.\r\n\r\n\r\n**[Click here to view LS products.](https://www.automation24.ir/product/list/search/?manufacturer_id=24&pageItems=120)**\r\n\r\n\r\nNote: the miniature keys can be equipped with peripheral devices to detect on and off status or alarms.\r\n\r\n### **Points that must be observed when buying a miniature key:**\r\n\r\nMiniature key workflow\r\nMiniature key type (depending on the place of use)\r\nAccessories\r\nThe number of its bridges

**[25 amp life protector LS duplex] (https://www.automation24.ir/product-1700/%25D9%2585%25D8%25AD%25D8%25A7%25D9%2581%25D8%25B8-%25D8%25AC %25D8%25A7%25D9%2586-ls-%25D8%25AF%25D9%2588%25D9%25BE%25D9%2584-25-%25D8%25A2%25D9%2585%25D9%25BE%25D8%25B1)** The safety switch is a fuse that reacts to the leakage current and issues the order to cut off the power. The operation of the safety switch is based on the calculation of the difference in current in the circuit, so that if this difference exceeds a certain limit, it indicates a leakage current and cuts the circuit. This switch is available in different types from 25 to 63 amps with a sensitivity of 30 or 300 milliamps. In addition to preventing electric shocks, this switch is also used to prevent fires caused by leakage current. **[Click here to view LS products.](https://www.automation24.ir/product/list/search?keywords=&in_description=1&category_id=0&inc_subs=1&manufacturer_id=24&pfrom=&pto=)** ## The sensitivity of life-saving keys is selected according to the type of protection: - Human protection against direct contact: 6, 10 and 30 mA are usually considered. But due to the frequent interruption of the circuit during the occurrence of leakage currents of 6 and 10 mA, the most sensitive used is 30 mA. - Human protection against indirect contact: 300 and 500 milliamps are usually considered. These types of parts are mandatory in TT systems and recommended for lateral safety in TN and IT systems. - Protection of equipment against the risk of fire: 300 mA is usually considered.

**[LS contactor MC 18b coil 220V] (https://www.automation24.ir/product-1100/%25DA%25A9%25D9%2586%25D8%25AA%25D8%25A7%25DA%25A9%25D8% 25AA%25D9%2588%25D8%25B1-ls-%25D9%2585%25D8%25AF%25D9%2584-mc-18b-%25D8%25A8%25D9%2588%25D8%25A8%25DB%258C%25D9%2586- 220-%25D9%2588%25D9%2584%25D8%25AA)** Contactor : Contactors are electromagnetic switches and are considered to be one of the most important components of control circuits. Before contactors were made, connections were made by manual switches, which were of different types of blades, tongues, and rollers, but with the arrival of contactors in the market, almost all the uses of simple switches Out of date, contactors were considered faster and more reliable. ## Compared to simple keys, the contactor has characteristics such as: 1-Command from several points 2- Remote control 3- Being economical 4- Automatic shutdown in case of power failure 5- The possibility of designing automatic circuits **[Click here to view LS products.](https://www.automation24.ir/product/list/search/?manufacturer_id=24&pageItems=120)** Contactor building: It can be said simply that the contactors are a series of metal contacts that are insulated from each other and also made of a bobbin to attract and repel these contacts. Contactor working principles: When Bobby

**[[PLC Delta DVP28SS211R](https://www.automation24.ir/product-3478/plc-%25D8%25AF%25D9%2584%25D8%25AA%25D8%25A7-dvp28ss211r)** ## The number of CPU inputs and outputs is 28 and can be increased up to 480 ## ## Programming capacity of 8000 steps ## ## Has RS-232 and RS-485 ports ## ## It has two 10KHZ pulse outputs ## Flexibility in choosing types of extensions: All SS / SA / SX / SE / SV CPUs use common expansions, also they can connect to 8 different expansion modules including analog input, analog output, temperature module, position control, Profi Bus, Device Net, DIP They have switch and single-axis motion control functions. This collection prepares and equips slim series PLCs for all types of applications. [**Click here to view Delta products.**](https://www.automation24.ir/product/list/search/?manufacturer_id=5&pageItems=120) PLC: Today, with the advancement of science and technology and going towards reducing costs, there have been many changes in electrical science. The use of complex circuits that all benefited from a lot of wiring and the problems of f

**[Paras Fanal single contact chassis (NO)](https://www.automation24.ir/product-3132/%25D8%25B4%25D8%25A7%25D8%25B3%25DB%258C-%25D8%25A7% 25D8%25B3%25D8%25AA%25D8%25A7%25D8%25B1%25D8%25AA-%25D8%25AA%25DA%25A9-%25DA%25A9%25D9%2586%25D8%25AA%25D8%25A7%25DA%25A9% 25D8%25AA-%25D9%25BE%25D8%25A7%25D8%25B1%25D8%25B3-%25D9%2581%25D8%25A7%25D9%2586%25D8%25A7%25D9%2584-\\(no\\))**\r\n\r\n\r\n\r\n\r\nPush button is a typical switch mechanism to control some system activities. There are many push buttons in the market with different models and different shapes and mechanisms. Push buttons actually perform a function when pressed by the operator. Push buttons can be momentary, that is, they act as soon as we press it and it returns to its original state if we let go of it, or it can act in such a way that it acts by pressing it and in It remains in the same position and returns to its first position by being compressed again.\r\n\r\n\r\n\r\nPush buttons in terms of color:\r\n\r\nPush buttons are also made in different colors, each of these colors represents a type of function. For example, red color is used to step the system and green color is used to start or start the car. This feature prevents the operator from making mistakes while working with these keys.\r\n\r\nAlso, a series of push buttons in red color have bigger heads than other push buttons, which are called mushroom keys in the industry and are used as emergency chassis in the system. This type of mushroom push buttons is designed in two ways, with keys and simple, for use in different places. Depending on the limitations of the system, the push buttons are made of plastic or metal, which have a simple or waterproof function available in the market.\r\n\r\n\r\n\r\n\r\n**[Click here to view Pars Fanal products.](https://www.automation24.ir/product/list/search/?manufacturer_id=64&pageItems=120)**\r\n\r\n\r\n\r\n\r\n\r\n## In terms of performance status:\r\n\r\nIn order to show the status of some push buttons to the operator, a light is also installed on them, and if the light turns on, the operator will know that this key has worked.\r\n\r\n### Things to consider when buying push buttons:\r\n\r\npush button type (for example, start or step)\r\nType of operation (for example, momentary or permanent)\r\nCombination of contacts (1NO+1NC)\r\nThe diameter of the installation location of the push button on the panel\r\nThe voltage of the light, if the light is on, push the button\r\nAbility to replace contacts\r\nTolerable current of contacts\r\nAllowed number of disconnections and connections