Sell Offers Building Materials - Page 5

برای آب بندی گود های ساختمانی و فونداسیون مجتمع ها، از قدیم تا امروز روش های گوناگونی مانند: ایزوگام و قیرگونی و ... موجود بوده که این محصولات در برابر آسیب های گوناگون محیطی نتوانسته نتیجه قابل قبولی داشته باشد و امروزه با پیشرفت صنعت ورق های پلیمری مثل ورق ژئوممبران جایگزینی بسیار مطمئن برای روش های قدیمی است. ورق ژئوممبران پی وی سی (PVC)، میتواند با کمترین هزینه، نصب آسان و سریع از فوندانسیون ساختمان شما، تا سالیان سال در برابر رطوبت و ورود آب جلوگیری کند.

Unglazed and self-colored Tabaristan pottery\r\nGreen and ocher glazed Tabaristan pottery

Buy and sell used foamless molds

Buying and selling second-hand Veno molds

The electric Unolit is suitable for any type of Unolit such as roof Unolit and sheet Unolit. One of the features of this product is the speed of cutting and removal of Unolit shavings resulting from cutting. This device is for all operators of the construction industry, including those This device is very practical and useful for all those who work with the cutting of unolith in some way.\r\nUnolit electric machine for the first time in the country and for cutting ceiling foam and ICF parts, a very practical and cheap machine needed by all executive teams.\r\n\r\nFeatures:\r\n\r\nHigh cutting speed\r\nRemoval of unolith shavings resulting from cutting\r\nWith a 6-month replacement warranty\r\nCheap and economical price\r\nTechnical specifications:\r\n\r\nLength: 50 cm\r\n\r\nWidth: 6 cm\r\n\r\nBlade length: 27 cm\r\n\r\nBlade width: 2 cm\r\n\r\nInput power: 220 volts\r\n\r\

The bundles of double-stranded wire produced by Meh Mill Store in three sizes 12, 16 and 18 with a diameter of one mm replace the reinforcing wire. In order to use double-layer wire, the old armature pliers are removed and semi-automatic pliers available at Meh Mill Store are used instead. The advantages of using double loop wire are as follows  Removal of at least 20% of stray wire reinforcement  The difference in the weight of using this new wire compared to the reinforced wire saves about 40%.

شرکت سازه بنیان اسپادانا ،تولید کننده ی دیوارهای بتنی پیش ساخته ی پانلی وپازلی رنگی با قابلیت مونتاژو دمونتاژمکرر، سرعت نصب بسیار بالا(بدون نیاز به جرثقیل)،قابلیت نصب درسطوح شیب دار باطرحهای متنوع و زیبا، قیمت مناسب ومقاومت دربرابر باد و طوفان تا 130کیلومتر برساعت این افتخار را دارد که توانسته است محصولات خود را با بالاترین کیفیت در بیش از 200نقطه ی ایران عزیز با شرایط اقلیمی و آب و هوایی متفاوت در مراکزی از جمله مراکز امنیتی ؛نظامی،اداری،صنعتی؛تجاری،مسکونی،انبار،تف ریحی،با غ و ویلا،زمین و....ارایه نمایند. از سایت ما دیدن فرمایید. وب سایت : تلفکس: 33325737-031 همراه : 09131198979 پست الکترونیکی : saze_bonyan@yahoo.com باتشکر از توجه شما : خانم کریمی پور

رول های نمای ساختمانی زد آب در عرض های ۱۰۰ الی ۳۴۰ سانتی متر

Dernica decor polyurethane skirting boards are an excellent choice for interior decoration with easy installation and various designs.\r\nThe most important advantages of Dernica Decor polyurethane framing tools: first-class imported from China, the ability to paint or patina work - easy and fast cutting and installation - high variety of designs and models - reasonable price considering the high quality of imported tools - ability to install on All levels \r\nTo view and order these products, contact us now or follow us on social networks.

With more than half a century of experience, Bozorgmehr Industrial Group is one of the most prominent and well-known manufacturers of prefabricated sandwich panel houses in Iran. which has been able to enjoy a lot of popularity in this field due to the use of the best imported and domestic materials in the construction and production of luxury sandwich panel prefabricated houses. \r\n\r\nAmong the uses of Bozormehr brand sandwich panel prefabricated buildings, we can refer to prefab office, residential, industrial, security, warehouse, commercial, etc. buildings. This modern metal structure has a standard and customized design, color and dimensions.\r\n\r\nThe extraction of Bozormehr brand prefabricated building from the outer wall, inner wall and roof with sandwich panels made for this purpose are completely anti-earthquake and insulated against cold, heat and sound. The modern sandwich panel house is light and portable, and all the parts are bolted so that they can be easily and quickly assembled and disassembled. They have an electrostatic furnace color and have the ability to make floors with materials such as ceramics. The roof covering of the prefabricated building is upvc. \r\n\r\nWith the aim of improving the quality level of the products, Bozorgmehr Industrial Group listens to the suggestions, criticisms and solutions of all dear ones and puts its light in the direction of providing a safer and more beautiful product.

فروش عمده در استان فارس و استان های کشور به صورت کلی و جزئی با بهترین کیفیت ومناسبتریت قیمت با علامت استاندار و ایزو با 15 سال ضمانت و5 سال بیمه ایران از طرف کارخانه تلفن تماس : 07143235270- 09173280222 مدیریت فروش مهندس کشاورز منبع : قیمت : 35500 دو لایه استاندار با فویل آلومینیوم و وکیوم

Supply of almond sand, chickpeas and washed sand in Asalouye area\r\nIn industrial areas, Asalouye\r\nTypes of sand\r\nCrushed sand: sand obtained by breaking dense rocks such as limestone or granite. Because these sands are artificially produced and not formed by wear, they have a rough surface and sharp corners; Which makes them suitable for making concrete.\r\nWashed sand: It is sand that is washed after processing to remove dust and dirt. This will increase their adhesion in the mortar.\r\nDouble-salted sand: Double-salted sand, as its name suggests, is washed twice. This work makes all the pollution and particles on it to be cleaned efficiently and it is a very suitable option for concreting.\r\nWind-blown sand: Wind-blown sand is a type of natural sand that the wind has caused to move over each other and wear them. The grains of this sand are very small and therefore not suitable for making concrete.\r\nSoil sand: This sand has very small particles like soil and is gray in color.\r\nWhat is sand?\r\nGravel, like sand, is an aggregate obtained by crushing natural stones. The size of gravel is bigger than sand. Based on their shape, sand can be divided into pea sand, almond sand, needle sand and flake sand.\r\nBoth sand and sand are created together, but differences such as size, shape and granularity separate them from each other. The most important difference between sand and sand can be seen in the following cases:\r\n\r\nThe first difference between sand and sand is their size. The size of sand grains is 60 to 2 mm and the size of sand grains is 2 to 0.6 mm.\r\nThe next thing is the price difference between sand and sand. In the construction of large structures, using gravel for the foundation is cheaper than sand.\r\nAnother difference between sand and sand is in the settlement of the structure; This happens less often in structures that are in sand.\r\nSand is more porous than gravel.\r\nAnother important difference between sand and sand is that they use sand in making concrete, but not sand.\r\nAnother difference between gravel and sand is that because there is a larger space between the sand particles, it is easier to move.\r\nThe difference between sand and sand makes it easier for water to move through sand.\r\nSand is mainly quartz and is formed from the weathering of igneous rocks such as granite.\r\nThe difference between natural and broken sand is that natural sand is found in the same way in nature (mainly river beds). But broken sand is made artificially in factories by breaking large rocks.\r\nThe difference between sand and sand according to publications 101 and 55 is that sand is coarse aggregate and sand is fine aggregate.\r\nAnother difference between sand and sand, according to publications 101 and 55, is that sand is obtained from the river or broken stone or a mixture of these two, or from the top of the furnaces. But sand is prepared in natural or broken form.

Supplying and sending matte and shiny masbara in different sizes\r\nThe manufacturer of the highest-quality masbara approved by the employers of large industrial projects in the oil and gas industry\r\nIn industrial areas, especially Asalouye, Chabahar, Jask and other parts of the country\r\napplications\r\nUsing high pressure blasting equipment, this product is the most suitable material in terms of quality and price to remove rust, deposits and prepare surfaces for painting (such as ship hulls). which is used in shipbuilding, bridge construction, steel industry, etc.\r\nThis product is also used in sandblasting operations in the automotive industry, where sandblasting is used to remove some impurities and precisely clean the metals used in car parts.\r\nWhat is Masbara?\r\n Copper slag is a by-product of the process of melting minerals and used metals, which is formed during the separation of metals from impurities in the furnace.\r\nDuring the melting of minerals, the impurities remain floating on the molten metal, which after cooling produces angular granules called mesbareh, which have irregular granulations that are used as abrasives. In general classification, slags can be classified according to processing conditions into blast furnace (BF) slag, air-cooled blast furnace (ACBF) slag, basic oxygen furnace (BOF) slag, and electric arc furnace (EAF) slag.\r\nMasbara specifications\r\nGrit slag is a byproduct of the copper mining process. Due to its hardness and high density, this product has a higher speed and surface cleanliness than other abrasive materials and is the best alternative to common abrasives such as silica. Due to the low percentage of silica, there is no danger to human health, and its price is also low recently due to its large production.\r\n Masbareh and its superiority over silica sand\r\nConsidering that the use of silica sand as an abrasive is more common and in demand than other abrasives in Iran. The advantages of masbara compared to silica sand are stated as follows:\r\nAccording to the classification of slag abrasives in the important and international standard SSPC-AB1, this product is in category A with minimum free silica (crystalline silica) which is less than 1%. This means that there is no It does not cause environmental pollution, while the percentage of free silica in silica sand reaches over 90% due to its purity. That is, the dust produced during blasting is the cause of two dangerous diseases, silicosis and lung cancer. ) becomes\r\nThe minimum hardness of copper slag based on the international standard (ISO-11127-4) is seven mos. which is measured by the glass slide method and has a much higher hardness compared to silica sand. As a result of the contact of this abrasive with the surfaces, it is easy to clean any dirt and rust, rolling oxides and old coatings with high thicknesses, and the surface preparation is done in the best way by providing the maximum adhesion between the surface and the coating.

Grout Polad-2 looks like Grout Polad-1, with the difference that its expansion is very small and only to the extent of compensating the shrinkage of the cement.\r\nBy making further modifications in the formulation of this grout, its mechanical properties have been improved so that its compressive strength has reached at least 650 Kg/cm² with an increase of about 20% compared to Polad-1 grout.\r\n\r\nIndications:\r\n\r\nPrefabricated concrete structures such as walls, columns and beams connecting bolts to foundations, column plates, machinery foundations, crane rails, bridge foundations.\r\n\r\nAdvantages:\r\nPolad-2 grout has more abrasion resistance than Polad-1 grout, so this grout can also be used for hard floors.\r\n\r\nMethod and dosage:\r\nIn order to prepare and use a suitable and ideal grout, it is necessary and necessary to prepare the preparations for doing this work correctly.\r\n\r\nThe suitable temperature for preparing and using grout is 10°C to 30°C, and the working environment and materials should be kept at this temperature. Cold weather slows down the setting time and does not reach the resistance and the ability to work on the grout is lost.\r\n\r\nThe place where the grout is used must be clean and free from dust, oil and grease. This place must have been completely moistened before. At the time of pouring the grout, the proper angle of the grout should be maintained for the unhindered movement of the grout, and the grout should be poured continuously to prevent the formation of air bubbles.\r\n\r\nGrout Polad-2 (G2) is a ready-to-use product that only needs to be added with water of the right quality (without additional potable salts). The amount of water needed to make this mortar varies from 13% to 16% of the weight of the dry materials, depending on the required plasticity.

MS-1 super lubricant is produced and supplied based on modified melamine sulfonate formaldehyde.\r\nMS-1R super-lubricant is retarding, and for this reason, it is very suitable for heavy concreting as well as concreting in hot areas. The use of MS-1R in concreting with a large surface area and low thickness prevents the creation of surface cracks.\r\n\r\nMS-1R super lubricant conforms to ASTM C-494 Type G standard.\r\n\r\nIndications:\r\n\r\nConcrete pouring in tropical areas, massive concrete pouring such as dams, concrete pouring with pumps in super-reinforced structures, and concrete pouring of roofs, columns and prefabricated concrete parts.\r\n\r\nAdvantages:\r\nThe use of MS-1R increases the quality of concrete in the following cases\r\n\r\nPrevents the formation of surface cracks\r\nMental increase without dehydration\r\nIncreasing compressive and bending resistances\r\nIncreasing efficiency and durability\r\nSaving time and reducing concrete pouring costs\r\nReduction of vibration time and ease of spreading and polishing of concrete\r\nMethod and dosage:\r\n1% to 1.5% of the weight of cement is added to concrete water and mixed for 1 to 2 minutes to create a homogeneous and uniform mixture.

SF-1000 microsilica super gel is produced using a new generation polycarboxylate based super lubricant, which has higher lubricating power and, as a result, higher compressive strength than the microsilica gels produced by this company.\r\n\r\nSF-1000 microsilica supergel is the most suitable additive for making self-compacting concretes with very high mechanical and chemical resistances and higher efficiency and slump, especially for the production of durable concretes.\r\nSF-1000 microsilica super gel is produced and supplied based on ASTM C 494 & C 1202 standards.\r\n\r\nIndications:\r\n\r\nConcrete pouring in environments with high density of reinforcement, construction of durable, impervious and resistant concretes against chemical attacks such as piers, concrete structures in corrosive environments in northern and southern regions of Iran.\r\n\r\nAdvantages:\r\n\r\n- Increasing the flow of concrete to make self-vibrating concrete\r\n- Increasing the chemical and mechanical resistance and impermeability of concrete\r\n- Being economical and affordable\r\n- Very easy and convenient to move, store and use\r\n- Protecting the health and hygiene of employees and the work environment

Industrial iron filings are new materials for decorative concrete floors. If you are interested in the price and quality, please contact us. This product is a direct amount of iron filings. which has advantages relative to the materials you use. Because it has been analyzed, it is used as a direct regeneration for concrete strength. Please contact real buyers.

Iranian deserve the best. We have the best for you we have worked... Construction company, Aurora, a specialist of building insulation: *Below storage, Free *Repair ناودا...

برای خرید داربست می توانید از یکی از بهترین شرکت های ارائه دهنده انواع آهن آلات استفاده کنید و با تماس با شماره های این شرکت می توانید از محصولات موجود در این شرکت برای انجام امور ساخت و ساز خود بهره گیرید، در این شرکت که از بهترین عرضه کنندگان انواع آهن آلات می باشد، شما می توانید با بهره گرفتن از بسیاری از تجهیزات موجود در این شرکت و وجود کارشناسان خبره در این شرکت بهترین قیمت انواع داربست را بهره مند شوید. همچنین می توانید با تماس با مشاوران موجود در این شرکت انواع کالاهای موجود را استعلام قیمت کنید.

Decking Wood Company, by directly producing plastic wood in more than 40 different formats, supplies these products all over the country.\r\nManufacturing all kinds of wood plastic and thermowood accessories (flooring and wall covering, stairs, tables and benches, gazebos, pergola , Flowerbox, etc.), is one of our other services.\r\nDecking Wood, with its construction workshop and experienced specialized teams in the field of design and implementation of plastic wood and thermowood projects, such as roof garden and ..., zero to one hundred projects performs the reconstruction in a completely specialized way. The design of the items is modular and portable based on the standards of the United States and produced with local materials resistant to atmospheric factors. The company Decking Wood emerged from the heart of the Hermes Eschel collection. This company, which was founded in 1389, works in the field of landscape architecture and interior architecture.\r\nDeking Wood relies on the knowledge and experience of experts in the field of plastic wood and cooperation with one of the largest and most experienced producers of plastic wood in Iran. has entered the field of production of this product as an environmentally friendly material. Now this group, by equipping the factory with the latest advanced imported devices with the world's standards, produces and markets all kinds of plastic wood and plywood doors. slow