Alborz-Nama is the largest producer of refractory bricks in Tehran

The metal frame of the building is one of the best choices for construction. In this article, we are trying to explain these advantages to you. Stay with us. The existing restrictions in the urban space have led to the construction of multi-storey apartments. And as the height of the buildings increases, the type of materials used also changes. The most common types of materials in the construction industry can be called concrete structures and metal frames. For more information and advice, please refer to the contact information at the bottom of the ad.

After implementing the foundation and installing the shed frame, the most important part that must be done is covering the roof of the shed. This cover is made of various materials that can be different depending on the geographical area and the type of use of the shed. The outer covering of the roof of the shed can be colored and galvanized sheets, sandwich panels, shutters and trapezoids, and even polycarbonate. Glass wool or stone wool, polystyrene foam, polyethylene, and cardboard can also be used for the inner covering of the roof of the shed. It should be noted that in order to protect the inner cover of the roof of the cheap shed, chicken nets, or metal nets in fine texture designs, etc. are used. The competitive advantage of Soleh Bank of Iran can be called the use of advanced coating cutting machines, which produces products that are very accurate in terms of size and mechanism.

Thermowood paint restoration services, plastic wood (PVC or polyethylene) and cement board by glossy or matte acrylic solvent-based sealer and killer with needle-like gloss or super matte surface texture, which is completely resistant to UV rays and penetration It is isolated from water, it is formed, with stability and long life of paint coating based on solvent-based acrylic polymer, resistant to water penetration and mineral deposits.\r\nFeatures of solvent-based acrylic killer compared to water-based acrylic killer.\r\n1- Water-based acrylic paint has a matte surface, while solvent-based acrylic paint has a shiny surface with needle texture and very suitable for wood polishing.\r\n2- Solvent-based acrylic killer is 100% waterproof, while water-based acrylic is not completely waterproof.\r\n3- Both are resistant to UV rays.\r\n4- Solvent-based acrylic paint does not leave brush marks when processed on surfaces by a brush. If water-based acrylic paint has a big problem of brush marks and processing difficulty.\r\n5- Solvent-based acrylic paint has strong adhesion and chemical bonding to PVC, plastic wood or plywood, while water-based acrylic paint peels on plastic or plastic wood and is not suitable for this work.\r\n6- Solvent-based acrylic paint can be used simultaneously on wood, metal, plastic, cement board, fiber cement board, brick, stone, and especially granite and construction materials, and it has a clearer surface than glass on all surfaces, but the color Water-based acrylic has a much more limited application, and most importantly, it has a dull and lifeless surface and does not have the proper polish to reveal the three-dimensional texture of wood.\r\n7- Solvent-based acrylic killer made of PMMA polymer gives the surface of wood and plastic wood a wet and permanent wet condition and does not have a limit on the number of paint processing times, while water-based acrylic killer lacks such a feature due to its opaqueness. . \r\nRestoring the color of Termwood. Restoring the color of Termwood. Restoring the color of Termwood. Restoring the color of Termwood. Restoring the color of Termwood. Restoring wood plastic. Restoring wood plastic. Clear acrylic instant gloss killer. Clear acrylic instant gloss killer. Perfectly transparent acrylic instant gloss killer. Solvent-based needle gloss acrylic killer.. Solvent-based needle gloss acrylic killer.. Solvent-based needle gloss acrylic killer.. Solvent-based needle gloss acrylic killer.. Solvent-based needle gloss acrylic killer. Solvent-based needle. Wood, plastic and polywood. Paint for wood, plastic and polywood. Paint for wood, plastic and polywood. Paint for wood, plastic and polywood.

Manufacturing and supply of a variety of waterproof and waterproofing doors for PVC and PVC coating and supplying all kinds of Turkish -manufactured anti -theft doors.\r\nDoors available in the Iranian market:\r\nMDF door with 3, 5 and 8mm thicknesses that are typically offered with PVC coating\r\nThe HDF door, which is both raw and coated\r\nThe ABS door, known as waterproof in the market, is not true.\r\nThe polywood door is currently the best and most resistant to moisture, which can be exposed to moisture due to the use of waterproof materials and guarantees the manufacturer.\r\nSafe or anti -theft doors for the entrance to the apartment and villas.\r\n\r\nYou can always use consultation with us to make a good choice.

## Multi -layer ceiling coatings: structure analysis, physical properties and technical superiority over metal sheets\r\n\r\n\r\n\r\n### a new approach to covering the roof using U.PVC polymer composites\r\n\r\nChoosing a roof cover is one of the most vital decisions in any construction project that directly affects the durability of the structure, the comfort of the residents and the long -term energy costs. Shadow Sazan Polymer Company, as the largest and most advanced manufacturer of U.PVC ceiling coatings in Iran, proudly offers a modern and engineered solution to overcome the disadvantages of traditional ceilings (such as metal and cement sheets). Our products, including the well -known series of Sino ** and ** Poly Popan **, are the result of the combination of polymer metallurgical knowledge and advanced production technology that bring you a fully insulated, beautiful, durable and economical ceiling.\r\n\r\n---\r\n\r\n### Technical and Structural Analysis of U.PVC Ceiling Coatings\r\n\r\nThe real power of our ceiling covers lies in their unique construction technology and formulation. Here\'s a deep description of this technology.\r\n\r\n### 1. Construction Technology: The process of covarogen and layer structure\r\n\r\nUnlike traditional monolabial sheets, our U.PVC panels are produced in a complex process called ** Co-Extrusion **. In this technology, several layers of different materials are melted and combined simultaneously, forming an integrated sheet with engineered properties in each layer. The usual structure of these sheets is as follows:\r\n\r\n** Surface Layer: ** This layer, which is exposed to atmospheric factors, is made of extremely resistant polymer materials such as ** ASA (acrylonitrile style acrylate) ** or PMMA. These compounds are specifically designed for maximum resistance to UV (UV) of the sun. This layer guarantees that the color of the ceiling has been constant for many years and prevents the phenomenon of photos-degradation that causes fragility and erosion of the polymer.\r\n** Core Layer: ** This layer, which forms the main thickness of the sheet, is made of pure U.PVC with special additives. This layer provides a solid, rigid and freight structure for the sheet. In many models, this layer has a microscopic foam structure, with high air bubbles being trapped. This structure greatly reduces the weight of the sheet and, more importantly, acts as a ** ** thermal and acoustic insulation **.\r\n** Bottom Layer: ** This layer is also made of high quality U.PVC and creates a smooth, resistant surface of corrosive vapors and gases (which may be emitted from the interior of the niches or factory).\r\n\r\n### 2. Profile Design and Panel Geometry: Optimization for sealing and mechanical strength\r\n\r\nIn addition to the multilayer sheets, the shadow maker of the polymer produces certain profiles such as the ** \"single wall panel\" **. This profile, which is also visible in the images, despite being single -walled, due to its specific geometric form (arched and with its lock edges

## UPVC Side Side Side Polymer Shadows: Lasting Beauty and Full Building Insulation with 25 years of Specialty\r\n\r\n\r\n\r\n### Revolutionary in building facades, a combination of beauty and technology\r\n\r\nThe facade of a building represents its identity, quality and durability. Shadow Sazan Polymer Company, as the first designer, the only exclusive manufacturer, and the largest Siders U.PVC Side building facades throughout Iran, offers a new and clever solution to cover and beautify the exterior of buildings. Since 2001, we have been a pioneer in the design and implementation of this modern facade, relying on more than 25 years of experience and deep technical knowledge. Syeding U.PVC, by replacing traditional materials, not only gives your building a beautiful and integrated look, but also protects it from the most difficult weather conditions and helps optimize energy consumption.\r\n\r\n\r\n\r\n### Technical features with full detail\r\n\r\nShadow Sazan Polymer Side Products are the result of advanced production processes and the use of the best raw materials. In the following, we will detail the technical features of this prominent product.\r\n\r\n### 1. Material nature: Engineered U.PVC (Unplasticized Polyvinyl Chloride)\r\n\r\nThe main material of this facade is U.PVC, a hard and highly resistant thermoplastic polymer that has rigids, dimensional stability and unique durability due to the lack of plasticizer.\r\n\r\n** Advanced Formulation: ** In the production process, specialized additives are added to the composition of the PVC, each playing a vital role:\r\n** UV (UV stabilizers) stabilizers: ** precise values ​​of titanium dioxide (TiO2) and other anti -UV compounds are added to the formulation to keep the panels stable against persistent and severe sunshine radiation and prevent the phenomenon of color, yellow or fragility.\r\n** Impact Modifiers: ** These compounds significantly increase the resistance of the panels to physical impacts, hail, and tensions caused by transportation and installation.\r\n** High-Grade Pigments: ** The use of high stable mineral and organic pigments guarantees uniformity and durability of all panel thickness.\r\n\r\n### 2. Profile Design and Installation System (Interlocking System)\r\n\r\nThe Side Panels are manufactured horizontally (CLAPBOARD STYLE), which gives the classic, yet modern beauty.\r\n\r\n** Locking System (Crotor and Tab): ** Each panel has a tongue and groove design that is fully locked when installed. This mechanism creates an integrated, seamless and completely sealing surface that prevents any moisture, dust and insects from penetrating.\r\n** Dry installation on infrastructure: ** This facade is implemented by \"dry installation\". First, a network of metal profiles or saturated wood is installed on the main wall of the building, and then the sidewalk panels are screwed on the substrate. This method creates an empty space between the main wall and the siding facade

Hi we are the manufacturer of all kinds of metal cooler valves\r\nPVC \r\nWith the best quality and the most appropriate price\r\nDirectly of production without intermediaries

## Geoderin superior quality from insulation company\r\n## \r\nInsulation Company, ** [Progressive Geo -ntetic Products Manufacturer in Iran] (https://ayeghkar.com/)*), is proud to be proud to ** [Geoderin] (https://ayeghkar.com/%25da%2598%25d8%25A6%25d9%2588%25d8%25af%25d8%25b1%25db%258c% 25d9%2586%25d9%2581%25d8%25d9%25d9%25d8%25d8%25d9%2582%25DB%258C 25D9%25d8%25AA/) ** It offers high quality in two applications for construction, construction and industrial projects. Our products are manufactured with advanced technology and high quality raw materials and are an ideal solution for managing drainage and protection of structures.\r\n\r\n### Geodarin Features Insulation:\r\n** Excellent drainage performance: ** Designed to effectively direct and dispose of subsurface water, reduce hydrostatic pressure and increase structural stability.\r\n** High Resistance **: Produced with severe environmental conditions, UV radiation and chemicals.\r\n** Widespread Usage **: Suitable for road construction, tunneling, retaining walls, landfills and landscaping.\r\n** Long -term durability **: Resistance to erosion and corrosion for sustainable performance in the long run.\r\n** Easy installation **: Light and flexible design for ease of transportation and installation.\r\n\r\n## Geoderin Insulation Models:\r\n## \r\n### Geodrin Bar:\r\nWidth: 30 cm\r\nSuitable for linear drainage in small and medium -sized projects such as foundations, retaining walls and landscaping.\r\n\r\n\r\n\r\n### Geoderin Roll:\r\nDimensions: Width 2 m, length 20 m\r\nIdeal for large projects such as landfins, tanks, and extensive drainage on road construction and tunneling.\r\n\r\n** Why insulating geodrin? **\r\n1. Guaranteed Quality: Production in the factory equipped with international standards.\r\n2. Specialized Support: Our expert team is ready to provide technical advice and support throughout your project.\r\n3, Competitive Price: Providing the best quality and reasonable price.\r\n4. Environmental Protection: Recycled and environmentally friendly products.\r\n\r\n** Applications: **\r\nDrainage in construction projects such as roads and bridges\r\nWater management in Landfils and tanks\r\nProtecting foundations and walls\r\n\r\n** Contact Us **: For more information, pricing or order order, contact the Sales Team of the Insulation Company:\r\n\r\nInsulation, with you in sustainable development projects!