Manufacture of ionolite molds and casting parts

Due to the increase in manpower costs as well as the market's need for monochrome and multi-color printing, in 2014, a fully automatic machine for printing, cutting and sewing bags in three sizes, normal, wide and extra wide, was designed and built. One of the unique features of this machine is the constant rotation speed of the cliché cylinder (proportionate to the speed of the cutting and sewing section), which is in contrast to existing prints, because in these machines, the cliché cylinder has a short stop when printing each bag, and this Stopping will make part of the print on the bag fade. Considering that in this machine, the movement of the stereotype cylinder is uniform and continuous, the printing quality is very high and due to the use of anilox rollers, not only is the quality higher than the roll-to-roll printing available in the market, but the consumption of paint and solvent in It has decreased significantly. Due to the use of complex mathematical equations, the software of the device is designed in such a way that all steps are performed automatically and eliminates the need for skilled human resources. Also, when it stops - which sometimes happens due to the breaking of the spinning thread, bag weaving, or according to the need - the system completes the last print, and when restarting, after making the ink uniform, it transfers the new print to the bag. So that there will be no printing waste such as lack of printing or lack of color. The ink consumption in this system has been reduced to such an extent that the printed bag is completely dry when it reaches the cutting area. At the same time, due to the lack of need to stop the cliché cylinder - which has a lot of inertia - a motor with 30% power of the same model has been used, which significantly saves energy consumption and the initial cost of the device. Among the advantages of this device, the following can be listed: • No need to change the cylinder for different bag lengths High print quality due to the cylinder not stopping • High accuracy in cutting the length of printed bags Ability to turn off the printing unit to cut and sew plain and printed rolls • Ability to print and cut up to 180 cm length • Ability to simultaneously print on the back and on the bag • Ability to upgrade the printing department to add a second (color) printing unit • 50% reduction in human labor 60% saving in paint consumption, due to the use of anilox rollers Equipped with pump and color circulation system Automatic setting of parameters with the help of complex mathematical calculations Equipped with PLC, HMI, inverter and Delta servo motors •    Complete elimination of print waste when stopping and restarting

Packing Abara or Abarai is one of the types of packing used in cooling towers that, with its own design, helps improve the performance of cooling systems. \r\n- Increase the thermal exchange level: The lattice structure of this packing improves heat exchange and increases cooling efficiency.\r\n- High resistance: anti -corrosion, anti -sediment, and suitable for humid and chemical environments \r\n- Optimal design: Has air and water channels to reduce energy consumption and increase efficiency\r\n- Easy installation: light weight and fast assembly capability in cooling towers \r\nProper installation of Abara packages is essential to optimize the performance of the cooling tower. These packages must be installed based on the manufacturer\'s instructions to properly guide the weather and maximize the performance of the system. In addition to installing, proper maintenance of these packages is also important. Regular cleaning of packing of contaminants and sediments can help maintain their function. Also, if any damage is seen, the packages should be replaced quickly to prevent serious problems in the cooling tower system.\r\nFrequently asked questions\r\nWhy is Packing Abara used in cooling towers?\r\nPacking Abara, due to its specific design, creates a greater level of contact for thermal exchange, which reduces water temperature and increases the efficiency of cooling towers. These packages effectively distribute the flow of water and increase its contact with the air to make the heat exchange better and faster.\r\nHow much is the price of Packing Abara?\r\nThe price of Packing Abara depends on a variety of factors such as size, gender and design. In general, the price of these packages is usually calculated by square meters. Due to the use of high quality materials and design, Packing Abara may have a higher price than other types of packages, but this price is costly for industrial applications with high performance requirement.\r\nWhat is the difference between Packing Abara and honeycomb packing?\r\nPacking Abara and the honeycomb peak are both used in cooling tower systems, but there are major differences in their design and performance. Packing Abara is usually made of PVC materials and is specifically designed for high -capacity cooling towers, while honeycomb packing is suitable for less capacity towers and has a similar structure.\r\nHow to install and maintain Packing Abara?\r\nInstallation of Packing Abara should be based on the manufacturer\'s instructions to optimize the performance of the cooling tower. When installing, attention to the direction of air and water flow and proper layout of the packing is essential. In order to maintain, the packing must be cleaned regularly and removed from contaminants and sediments. Also, any damage or cracking in the packing should be quickly identified and replaced.\r\nWhat are the benefits of Packing Abara?\r\nPacking Abara has many benefits, including:\r\nThe high performance of heat exchange that helps reduce water temperature.\r\nResistance B.

Tolose Service Group Specialized Magnet Drill Devices Group with unique performance and reasonable price \r\nMagnet and profile drill devices are re -employed!\r\nCareful repairs, with main parts. \r\nSpecialized repair of magnet magnet drill, arrangement and magnet coil repair. \r\nYour assistant at all stages, with free technical advice.\r\nProfessional services in all parts of the country, fast and reliable.

Important Tips on Buying Stoke Ceiling Crane:\r\nCareful Examination: Before purchasing the Stoke Ceiling crane, be sure to thoroughly check it. Make sure all the components of the crane, including motors, gearboxes, towing wires and hooks.\r\nTest and Expert: Before buying, test the crane and examine it by an experienced and trusted expert. The expert can confirm the health of the crane and its proportion to your needs.\r\nWarranty and after -sales service: Get the right warranty and after -sales service for the Stoke crane. This assures you that if you have a problem, you can benefit from support and repair services.\r\nChoosing the right tonnage: Choose the crane tanning to suit your needs. Excessive tonnage crane increases your costs and less tonnage crane will not be able to move your desired loads.\r\nChoosing the right brand and model: Different brands and models of Stoke Ceiling crane are available in the market. Choose the right brand and model according to your needs and budgets.

If you are looking for a sustainable, reliable and economical solution to control electrical engines in industrial environments, the Qpower inverters will meet your technical and functional needs. This family is designed for a wide range of heavy and semi -average applications, from variable frequency drives, relying on advanced engineering architecture, modular design and durable industrial parts.\r\nVarious output power, from 0.75 to 7.5 kW\r\nThe FA100 and F300 series are available in single -phase and three -phase models to meet the needs of a variety of projects. Single-phase models such as FA100-0.75G-S2 to FA100-2.2G-S2 are designed for lighter applications and limited environments to urban electricity. In contrast, three-phase models ranging from FA100-0.75G-T4 to FA300-7.5G/11P-T4 with high power and sustainable performance are an ideal choice for accurate speed control of speed lines, pumps, fans and industrial process equipment.\r\nKey Features:\r\n• Support for various V/F control modes, vector and sensor \r\n• Excessive tolerance capability of up to 150% for 60 seconds\r\n• Compressed design with easy installation on industrial power panels\r\n• Full protection against overflow, voltage, short circuit and excessive temperature\r\nKiopower inverters are designed to focus on sustainable performance in real industrial environments and variable environmental conditions. The presence of internal EMC filters, high build quality and powerful protective circuits make them a reliable option for projects that require sustainable, accurate and continuous engine control.\r\nConfidence in performance, flexibility in design, and adaptation to the needs of Iranian industries.\r\nSee the technical specifications of each model right now and get the expert advice to choose the right model of your project.\r\n09382152007\r\n02146884992\r\nView Product View Link:\r\n[QPower Industrial Inverters] (https://qpowersupply.com/product-category/power-inverters-drives/)

Launch Zero to One Hundred Lines of Containers Reconstruction by the largest specialist in Teflon containers\r\nBy the experienced and engineering team\r\nSpecialized and free consultation\r\nAfter -sales support and service\r\nFully competitive price and ultimately excellent payment terms\r\nCall for information and pricing\r\nI am a military expert\r\n09147882829