Lifting tools

Mehr Engineering Company (always tracker scale) with more than 25 years of experience in the field of precision measuring and calibration devices as well as the exclusive sales representative and after-sales service of Arcs Taiwan, Easson China, Carmar Taiwan, Tesa Switzerland, etc. in Iran in the field of two-dimensional measuring devices, VMM, VMS. This company is ready to provide calibration services, updating and upgrading measuring devices Announces VMM and VMS in all cities of Iran. In order to benefit from free consulting services in the fields of dimensional and material testing, which includes all dimensional measuring and hardness measuring devices, this collection is ready to provide technical advice based on the needs of all customers at Show. Room is Mehr Engineering Company. \ R Therefore, in order to use the experiences of experienced experts of Mehr Engineering Company to solve its quality control problems, this collection announces its readiness to provide customers with the necessary instructions to control parts with the facilities available in Mehr Company Provide with devices in the world according to international standards. Some customers of Mehr Engineering Company: Chemia implantation of doctors Ava Pezeshk Cruise Good friends Raizco Best quality North Shamim Pajuhesh Yataqan Shahriyar Isfahan University of Technology Bahonar University of Kerman and ... Address and telephone numbers of the head office: Head Office: Tehran, 14 km of Karaj special road, after Iran Khodro crossroads, Ahad St., West Rajai Alley, No. 54, Mehr Engineering Building Phone: 3-021 / 44782171 Internal 202 Fax: 021 / 44792668 Email: Mehr Engineering Company: info@mehr-eng.com Sales Department: sales@mehr-eng.com Laboratory: laboratory @ mehr -eng.com After-sales service department: salessupport@mehr-eng.com Department of foreign trade: commercial@mehr-eng.com

Mehr Engineering Company, with more than 25 years of experience in the field of metrology and cooperation and exchange of information with the most reliable companies in the world, acquired the knowledge and ability to retrofit measuring devices in Iran, which resulted in upgrading and updating different measuring devices. 3D measurement is for various organizations and industries of the country and also after gaining valuable experience in this field, it has finally been honored to build the first CMM machine in Iran, which can be used in parts manufacturing, automobile manufacturing, medicine, power plant etc.\r\nThe CMM device and its accessories such as controller, joystick, air bearing etc. are produced and localized in Iran and this has caused all the after sales services of the device which include Installation and commissioning, operator training, periodic adjustment and calibration, maintenance, supply of parts and all the needs of customers inside the country will be done by Mehr Engineering Company. The CMM device of Mehr Engineering Company has obtained all the necessary standards. And it is delivered to the customer along with the ISO 10360 certificate by an accredited laboratory under the supervision of the ISO /IEC 17025 standard. Iran Khodro Crossroads, Ahad St., Rajaee West Alley, No. 54, Mehr Engineering Building\r\nTelephone: 3-44782171 Ext. 202\r\nFax: 021-44792668\r\nEmail: Mehr Engineering Company:\r \ninfo@mehr-eng.com\r\nSales department:\r\nsales@mehr-eng.com\r\nLaboratory:\r\nlaboratory@mehr-eng.com\r\nAfter-sales service department:\r \nsalessupport@mehr-eng.com\r\nForeign Trade Department:\r\ncommercial@mehr-eng.com

Mehr Engineering Company (always tracker scale) with more than 25 years of experience in the field of precision measuring and calibration devices and also the exclusive sales representative and after-sales service of Coord3 Italy, Carmar Taiwan, Co. Aberlink UK, AEH China, Leader China, etc. are fixed in Iran in the field of CMM measuring devices. Therefore, the company is ready to cooperate in the field of installation, training, periodic calibrations, software and hardware upgrades, maintenance of CMM devices (CMM) with all partners and dear customers in all Announces the cities of Iran. Some customers of Mehr Engineering Company: Iran Khodro Saipa Sapco Renault Pars Mapna Group Kerman Motor Sazeh Gostar Saipa Hepco Power Village Industrial Group and ... Address and telephone numbers of the head office: Head office: Tehran, 14 km of Karaj special road, after Iran Khodro crossroads, Ahad street, Rajaei alley West, No. 54, Mehr Engineering Building Phone: 3-021 / 44782171 Internal 202 Fax: 021/44792668 Email: Mehr Engineering Company: info @ mehr-eng. com Sales Department: sales@mehr-eng.com Laboratory: laboratory@mehr-eng.com After Sales Department: salessupport @ mehr-eng. com Department of Foreign Trade: commercial@mehr-eng.com

Polad Gostar Jam Trading supplies hydraulic and pneumatic tools in the oil, gas and petrochemical industries. One of the products of this collection is manual hydraulic pumps from the US brand. This set offers a variety of models of these pumps at a competitive price and guarantee of the originality of the product. \r\n\r\n1. The P-392 Hydraulic Pump This is a two-speed one-speed pump with 900 cc tank volume. \r\n2. \r\n3. \r\n\r\n\r\nPolad Gostar Jam also provides a variety of electric and pedal pumps from the Enerpac brand. \r\n\r\nAll products in this complex are provided with 12 months warranty and 15 years of after -sales service.

## The World of Gas Jack: Advanced engineering and controlled power for any industry\r\n\r\n### Introducing your specialized center in the gas jack industry\r\n\r\nThe ** \"World of Gas Jack\" **, as a direct importer and specialized center for selling all kinds of gas jacks, proudly offers the most comprehensive collection of these advanced engineering parts to the Iranian market. We provide precise solutions for the automotive, industrial, medical, medical, furniture and custom applications, relying on technical knowledge, working with Turkish top manufacturers and offering first class products. Our goal is not to deliver a product that only works, but also to provide an engineering solution that will transform your system\'s performance, safety and durability.\r\n\r\n### Gas Jack Technology Description: Locked in the heart of steel\r\n\r\nThe Gas Spring, sometimes referred to as the gas spring, is a hydropenomatic device used to store energy and apply controlled linear force. This seemingly simple piece is the result of a sophisticated engineering that helps understand the right choice and optimization.\r\n\r\n*** Function Principles: **\r\n * The heart of a gas jack is a steel cylinder filled with high -pressure nitrogen gas. Nitrogen is an ideal option for this application because of its neutrality and non -reactionability. The high pressure of this gas puts a permanent force to the piston cross -section that causes the piston rod to drive out of the cylinder. This force is the power of Jack, which is measured by the Newton **.\r\n*** Key Components: **\r\n 1. ** Cylinder: ** The main body made of resistant steel and holds gas and oil.\r\n 2. ** Piston ROD: ** Hard chromium or nitride steel shaft that transmits power with linear motion. Its coating is critical to corrosion resistance and reduced friction.\r\n 3.\r\n 4. ** Seals: ** The most important part to maintain jack performance. These pieces prevent high -pressure gas leaks and oil and guarantee the life of the jack.\r\n 5. ** Hydraulic Oil: ** There is a certain amount of oil in the cylinder that has the task of ** Damping or Damping **. When the jack reaches the end of its course, the piston passing through the oil reduces the speed of motion and prevents sudden trauma. This feature brings a soft, controlled motion.\r\n** Advanced Types: **\r\n ** ** Lockable Gas Spring: ** These advanced models have an internal locking mechanism. By pressing a pin or tolerant, the inner valve is opened and the piston rod is allowed to move. By dropping the guarantor, the jack is locked anywhere in its path. This technology is vital in medical equipment such as surgical beds and stretchers that need to be stabilized.\r\n *** Hydraulic Pump: ** This mechanism in hairdressing and dentistry seats

## Buy Kamja Flat Flat Direct in Tabriz | Production Price, Guaranteed Quality\r\n\r\n### Introducing your clever solution: Fico 110 Specialty Center\r\n\r\nFor people who seek to optimize their living space or work using modern beds, or specialists who need high -quality fasteners and jacks, Fico 110 ** as the first and top distribution center in the northwest of the country is a complete and comprehensive response. By eliminating intermediaries, we bring the products directly from the production line and guarantee the quality, durability and reasonable price.\r\n\r\n### what we offer: from specialized parts to complete installation\r\n\r\nThe Fiko 110 Trading is not only a supplier, but also a specialized center with deep technical knowledge in the following areas:\r\n\r\n** Specialized Distribution of Modern and Modern Beds: ** We provide a variety of wall beds that are an ideal solution for small apartments and spaces. Also, the boxes and the types of fixed metal coils in the bed are our other main products for equipping modern bedrooms.\r\n** ** Gas Springs Comprehensive Center: ** One of our most prominent areas of expertise is to provide and provide the highest standards of gas jacks. Our services in this section include:\r\n ** Bedroom Gas Jacks: ** With a variety of powers to ensure the soft and safe performance of all kinds of folding and jack beds.\r\n ** ** Industrial and Automotive Gas Jacks: ** Providing the needs of different industries and automotive parts market.\r\n ** Custom Jacks: ** Designing and presenting the jack based on the needs and specific technical specifications of customers.\r\n** Professional and Guaranteed Installation: ** Fico 110 Industrial Group, using experienced and trained staff, is ready to be accurate and safe installation of high quality wall beds and the lowest price.\r\n\r\n### Why should you choose Fico 110?\r\n\r\n** leading in the northwest of the country: ** As the first and top distribution center, we have a complete understanding of the needs of the region\'s market and we provide the best solutions.\r\n** Excellent Diversity of Products: ** From basic fittings to complete beds and installation services, we have provided a full chain of products and services for your convenience.\r\n** Direct and fair pricing: ** By eliminating intermediaries, you make a product at a competitive price that will save you significantly.\r\n** Quality, Our Instrumental Principle: ** We believe that high quality and high quality should not be expensive. All of our products are made of the best raw materials and their long -term performance is guaranteed.\r\n** ** Technical Support and Consultation: ** Our expertise is not just about selling. We are ready to provide technical advice to choose the best product to suit your needs.\r\n\r\n### questions that may be for you too\r\n\r\n** Question: Is Fico 110 operates only in Tabriz? **\r\n ** Answer: ** Our main center is in Tabriz, but as the largest distributor in the northwest of the country, ready to ship products to all cities

## Kamja Fico 110 Flat Framework 110: Careful Engineering and Unique Power for Optimal Space\r\n\r\n### Space optimization with strength and durability: Introducing Facuko 110 Flat fittings set\r\n\r\nIn today\'s world, where space optimization has become a key principle in interior design, wall -mounted beds are a clever and vital solution. Fico 110 Trading, as the first and foremost center for the preparation and distribution of fittings in the northwest of the country, proudly offers the consumer\'s \"full set of folding flat fittings\" to the consumer. The collection, which is the result of accurate engineering and the use of first -class raw materials, allows manufacturers, carpeople and technical experts to create a perfect, durable and safe product for their customers.\r\n\r\n### what distinguishes our fittings: technical review of parts\r\n\r\nOur product is not only a set of metal components, it is an integrated mechanical system, each component designed and manufactured by the highest standards.\r\n\r\n*** Metal coil (the main skeleton of the flat): **\r\n ** Engineered Structure: ** The main bed coil is made of heavy industrial steel profiles that guarantees extraordinary torsion and bending strength. The internal grid is precisely calculated to distribute the weight of the mattress and the user uniformly and prevent any long -term twist or deformation.\r\n ** ** CO2 Industrial Welding: ** All skeleton connections and points are made using advanced CO2 welding technology. This method creates a deeper penetration, more integrated connection and much higher resistance to stress and pressure than traditional welding, leaving no impurities or cavities in the welding site.\r\n ** ** Electrostatic furnace color coating: ** The entire coil surface is covered with an electrostatic furnace color layer. This process creates a highly resistant to scratching, rust, moisture and chemicals, and in addition to its durability, gives the skeleton a smooth and beautiful appearance.\r\n\r\n*** Gas jacks (lift system): **\r\n ** ** The beating heart of the system: ** This set consists of two powerful Gas Spring that act as the main mechanism for easy opening and closing. These jacks produce a crucial force using compressed nitrogen gas that neutralizes the weight of the bed and mattress and makes the movement smooth and controlled.\r\n ** Selectable Power: ** Fico Trading 110 Jacks with different powers (in Newton) proportional to the dimensions of the flat (single or two -person) and the weight of different mattresses. This guarantees the choice, optimal performance and maximum life expectancy.\r\n ** Premium quality: ** These jacks have thick steel cylinders and multilayer sealing pistons that prevent any gas leakage over thousands of open and closed cycles and provide a constant and reliable performance throughout their lives.\r\n\r\n*** Integrated Base and Handle: **\r\n *** Ho\'s dual -purpose design