There are no comments for this product
What does an insulated transformer work like? The insulated transformer consists of an iron core and two strands of insulating wire that are wrapped around an iron core and applied by Power to both ends of one of the wires, at the output we can receive voltage from the second wire, the coil to which we apply the Wardow electricity is called the primary coil and the second wire from which we receive the output wire The secondary screw is said to be One of the ways to reduce the risk of electric shock, especially in homes, is to use a protection system with an isolating transformer or isolating transformer. Isolated transformers are used to prevent high voltage AC transmission and to reduce the effects of lightning and to protect people from unintentional connection to one of the wires or short internal connection between one of the wires and the body of the device due to moisture or physical factors. Due to the importance of electrical insulation in hospitals and NICU, CCU and ICU operating rooms, as well as wards of specialized clinics, to prevent electrocution of patients and staff and comply with the provisions of the standards, isolated transformers are used in two types (EXTERNAL) or external It can be used as an independent device (INTERNAL) or inside the electrical panel. Also, all the above is also true in industrial environments with CNC machines such as water jet, lathe, milling, punching, etc. A one-to-one or isolated transformer is a transformer whose output voltage is equal to its input voltage. The use of one-to-one transformers between two electrical circuits causes the connection and exchange of electrical energy between them to be interrupted in practice. For this reason, these types of transformers are also called isolators or disconnectors. It does not cause electric shock. This type of protection uses a transformer with two separate one-to-one windings or a reducer whose output voltage is more than 42 volts. In a one-to-one transformer, the secondary voltage is equal to the mains voltage. Connection to more than one consumer is not allowed to the secondary of the protection transformer, because if two consumers are connected at the same time, there is a risk of electric shock. The secondary of this type of transformer should not have a ground connection.
Specific transformer properties : 1- Very high level insulation 2- Very secure ground connection 3- No interference of radio frequencies and very low noise 4- Refinement of interferences caused by nonlinear loads 5- Improving the overall power of the system 6- Design for special applications Used in powers:
| Company | الکترو گستر تهران |
|---|---|
| Tel | +98 21-3×××9172 |
| Mobile | +98 912×××0925 |
| Website | http://elecgostar.com |
| Country | Iran |
| Province | Tehran |
| Address | تهران-لاله زار-کوچه بوشهری-مجتمع تجاری تهران الکتریک-طبقه سوم -شماره 410 |
