There are no comments for this product
Raymond Company
www.raymongostar.com
Floculants Raymon A235
Floculants Raymon A245
Floculants Flopam A331
Tianrun A556
Tianruna756
(At the bottom of the ad)
(At the bottom of the ad)
Separate solid phases from liquid - dehydrate
Recycling water in processing plants is often inevitable, especially in cases where the factory is located in a low -water area, preventing water loss for recovery as well as preventing environmental pollution and loss of elements. Given that most of the mineralization methods occur in an environment that contains a significant amount of water, then the final product will be a pulp, which is sometimes very thin and should be reduced to the transport or other industrial activities by rinse it (ie removing solid from the liquid).
In most cases the major part of the water comes with the tailings, so in order:
• Warest warehouse http://www.raymongostar.com
• Prevent water from being contaminated by water with mineral http://www.raymongostar.com
• Recovery and reuse of water http://www.raymongostar.com
It is essential to separate the water in the tailings from the solid beads.
In various stages of mineral arrangement, partial drainage of the pulp may also be necessary to regulate its concentration. Also in some makeup methods, such as hydrometallurgical methods, after the dissolution of the mineral or the desired element in the solvent used, removal of the remaining solid phases is required from the enriched solution.
Rinsers can generally be divided into three categories:
• Set up http://www.raymongostar.com
• Filtering or filtering http://www.raymongostar.com
• Drying http://www.raymongostar.com
When the disposal is high in solid and liquid density, the settlement method has the best return. This is usually true in the remedies where the liquid is consumed. However, in hydrometallurgical procedures, it may not be efficient to settle because by increasing the solvent 'grade compared to the dissolved element or mineral, its density also rises and approaches the remaining solid grains. In such circumstances, the filtration method can only be used.
Incorrecting is usually a combination of the above two methods. The bulk of the water is first separated from the other by settling, resulting in a concentrated pulp that contains 55 to 60 % solid. At this stage, up to 80 % of the existing water can be removed by filtering the concentrated pulp of a cake with 10 to 20 % moisture, and if necessary, the humidity can be reduced to 5 % or less by drying. http://www.raymongostar.com
Company | رایمون گستر آریا |
---|---|
Tel | +98 26-3×××9023, +98 26-3×××9039 |
Mobile | +98 912×××9510 |
Whatsapp link | |
Telegram | Telegram link |
Country | Iran |
Province | Alborz |
Address | کرج |