Mercury nitrate, Mercury (II) nitrate

Polyamide, which is also called nylon, belongs to the semi-crystalline group of thermoplastics. Tisan brand polyamide is an anti-wear and impact-resistant plastic.\r\nPolyamide is generally divided into four grades: 6 simple and fibrous, 6.6 simple and fibrous.\r\nAriana Polymer Company is the main supplier of Tisan brand polyamide materials in Türkiye.\r\nFor advice on specialized materials of all types of polymers and to know the price of polyamide material, contact the company\'s numbers.\r\n09127050051\r\n02155577506\r\n02155154966\r\n02155599783

What is monoethanolamine?\r\nEthanolamines are actually a group of amino alcohols. Even a group of antihistamine compounds are known as ethanolamines. Dimenhydrinate, chlorphenoxamine, diphenhydramine, etc. are among these compounds. Monoethanolamines have properties of alcohols and amines. Therefore, they are able to react with both functional groups. These products are able to act as intermediate alkyl amines and react with acids to form salts and soaps. This material has a low evaporation rate at room temperature and will turn into a liquid form according to the temperature and purity level. Even in living tissues, this substance can be found, and this substance is one of the components of lecithin.\r\n\r\nMonoethanolamine absorbs water and carbon dioxide from the air and is miscible with water and alcohols in any ratio. The freezing point of this product is significantly reduced by adding water.\r\nTypes of ethanolamine\r\nMonoethanolamine\r\nDiethanolamine\r\nTriethanolamine\r\nProperties of ethanolamines\r\nName: Ethanolamine\r\nFormula: C2H7NO\r\nMolecular mass: 08 g/mol\r\nDensity: 1.01 grams per cubic centimeter\r\nBoiling point: 170°C\r\nMelting point: 10.3°C\r\nAppearance: A liquid with an ammonia-like odor\r\nSolubility in water: soluble\r\nProduction of monoethanolamine\r\nWhen the two chemical compounds of ammonia and ethylene dioxide are placed in the vicinity of each other in aqueous solution, they will react with each other. During this chemical reaction, the compounds: monoethanolamine, triethanolamine and diethanolamine are obtained. By using the stoichiometry of the reactants, the amount of each of these compounds in the product can be controlled and adjusted.\r\n\r\nThe important point in production in this way is that this process is highly heated and the temperature will increase drastically during this reaction. so that it may even reach the ignition temperature. Accordingly, this chemical reaction must be carried out in an equipped and safe environment.\r\n\r\nIndustrial production of monoethanolamine\r\nThis substance can be produced from the reaction of ethylene oxide with ammonia in aqueous solution. Diethanolamine and triethanolamine are produced during this reaction. The ratio of products can be controlled by the stoichiometry of the reactants.\r\n\r\nFeatures\r\nThis chemical is sticky.\r\nThis substance dissolves in methyl alcohol, glycerin and acetone.\r\nMonoethanolamine causes corrosion in metals such as iron, aluminum, zinc, copper, bronze and brass.\r\nWater, benzene, ether and carbon tetrachloride can be used as solvents for this material.\r\nThis product absorbs moisture and reacts with carbon dioxide in the air.\r\nLight can decompose this material.\r\nThis substance will be oxidized by air and turn yellow or brown.\r\nThe above composition has high viscosity.\r\nUses of monoethanolamine\r\nThe properties of monoethanolamine are used as a raw material in many industries to produce industrial products. Some of the uses of this material are mentioned below.\r\n\r\nProduction of detergents\r\nEmulsifier production\r\nMaking medicine\r\nbuild more

Sodium lauryl sulfate, abbreviated as SLS, with the formula NaC12H25SO4, or sodium dodecyl sulfate, abbreviated as SDS, or something close to it, sodium lauryl sulfate, or sodium lauryl ether sulfate, Sodium Laurylether Sulfate, abbreviated as SLES, are the most common anionic surface active sulfates (surface active substances anionic) of synthetic cleaners with high power and more precisely among surface active substances (surface active substances or effective substances) is This substance is an emulsifying, foaming, dissolution accelerating, and foaming chemical compound that is used in washing, detergent or food industries and is an anionic surfactant in shampoo production.[1]\r\n\r\nThis combination is found in most commercial detergents such as dishwashing liquid and industrial cleaners (car wash and salt floor cleaners and oil remover) and in more than 90% of hygiene and body and head cleaning products such as toothpaste, soap, shampoo, cream and lotion. Liquid or non-liquid is used to remove fat as a foaming and cleaning agent and an emulsifier of sticky substances and is one of the primary ingredients of cosmetics and medicine. [2] Sodium lauryl sulfate was first used as an engine degreaser during World War II because the chemical was abrasive and corrosive enough to remove the toughest oils and soot.

Capital Afarinan Naqsh Jahan Company is a producer of industrial vaseline

Production of sodium sulfate 98%\r\n _ With a light density of 36/.\r\n with 25kg packaging \r\n_ Heavy with a density of 1.2\r\nWith jumbo packaging\r\n_ Salt under .05%\r\n_ph7_,8 \r\n_ The sodium sulfate production unit is located in Ashgabat Tabas (South Khorasan), loading and shipping all over the country. \r\n With the best quality \r\n For purchase order \r\n And to receive the price, please contact the indicated number.\r\n thanks

**Iranian industrial grade ammonium chloride with a minimum purity of 99.5**

Export and domestic sales of calcium chloride 94%\r\nQuality assurance\r\nCompetitive price\r\nWith the shortest delivery time\r\nApplication of calcium chloride\r\nCalcium chloride has similar applications to sodium chloride and is used as a food additive, food preservative, de-icing roads in winter and as brine in refrigeration plants.\r\nThis substance is used as a dehumidifier in food packaging to increase shelf life and prevent food spoilage. In the oil and gas industry, calcium chloride is used to increase the density of solid brine and to inhibit clay swelling in drilling fluids.\r\nThis material hardens the pool water and thus reduces the erosion of the concrete used in the pool body. Calcium chloride is a corrosive substance and accelerates rusting, so it should not be used around metals.

**Sales of calcium chloride 94% for export and domestic** \r\nKolran factory and private sector\r\nThe best quality\r\nImmediate delivery time\r\nCalcium chloride is an inorganic compound with the chemical formula CaCl2, which is very soluble in water. At room temperature, calcium chloride is a white, crystalline solid in the form of powder or flakes with a purity of 77% or 94%, and it is a very important salt that has many domestic and industrial applications.\r\n\r\nCalcium chloride is usually a hydrated solid with the general formula CaCl2(H2O)x where x can be 0, 1, 2, 4, or 6. These compounds are mainly used for deicing and dust control.\r\n\r\nThis composition is in the form of an odorless and salty powder whose melting point is 782 and its boiling point is above 1600 degrees Celsius.\r\n\r\nCalcium chloride is used in swimming pools and water treatment facilities and is also used as a desiccant in laboratories and factories. Calcium chloride is also used in metallurgy, oil well drilling, rubber, paper and dye industries.