Gray and ductile iron ingots

Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش with excellent quality. That in size and quality, ranging from 60 to 95% zirconia to be provided. Nozzle تاندیش on the floor of the تاندیش located, and the number of packages to نعداد casting lines. Also, due to the amount of tonnage of steel castings, the percentage of zirconia and alumina ولبلوک is changed . According to the cross sections of billets, casting, and the conditions of melting can be the diameter of the nozzle تاندیش the direction of outflow of the melt determined . The quality of the zirconia used in the nozzle تاندیش very important because it increases or decreases the speed of casting can be, which eventually causes the tearing line of the casting and stop. Nozzle تاندیش to a few models, is consumed . 1 - nozzle تاندیش قندانی with zirconia all the 2-nozzle تاندیش استکانی with zirconia half height 3 - nozzle تاندیش with zirconia all the 4 - nozzle تاندیش all zirconia The nozzles in two models of Percy and مونتاژشده with the mortar green . ولبلوک the nozzle, both round and rectangular are available. ولبلوک nozzle تاندیش due to the amount of tonnage of steel castings made with different percentages, alumina available . Percent zirconia nozzle تاندیش استکانی model Indian 96%. In the factory, the company Selim industry sepahan line preparation nozzle تاندیش created where the nozzle تاندیش with different sizes assembled . Prices nozzle تاندیش reliable supply by the company is competitive and has its quality guaranteed. This company is ready to send nozzle تاندیش in the trial to the factory of production of steel ingot brosh continuous casting. This nozzle تاندیش in the method of production of steel ingot as a continuous casting – continuous used گیردند.

Isotherm Powder In steel mills, ladles and tandis are used to transport the melt from a specific location furnace. Depending on the conditions, the type of body design and refractory spatulas and tandis as well as ambient temperature drop conditions are different. Boil lid due to the use of alumina masses and spending time to repair and install refractory materials has a higher cost than the use of isotherm powder. It is added on the surface of the melt. The main task of this powder is to insulate the surface of the melt to prevent the temperature drop and the melt is oxidized by the atmosphere. The isotherm powder used with a suitable chemical composition must have good thermal conductivity and viscosity to have a good performance. Insulation of the melt surface reduces melting costs by reducing the furnace melt discharge temperature and less corrosion of furnace refractories, ladles and ovens, and increases the absorption of molten non-metallic impurities. Isotherm consumption depends on the tonnage of the steel, the design of the pot and the tensile and the casting time. Isothermal powder becomes integrated when it is placed and spread on the molten surface of steel and begins to insulate the molten surface. When casting time is increased for any reason, this powder plays an important role in controlling the temperature drop. Isolation Melt the surface in the traditional way is done by raw and fried rice bran, which is associated with contamination and respiratory problems for employees. Raw rice bran, when placed on the surface of the melt, first takes the temperature of the melt to burn itself and creates a lot of smoke, and after burning, begins to isolate the molten surface. Due to the problem of water shortage and drought in the country and Also, the problems facing agriculture are facing the supply of rice bran. Rice bran is not always readily available and was scarce in some seasons. Due to its low weight and high volume, rice bran needs more transportation and therefore higher transportation costs. It also needs more storage space than the isotherm because it is bulky. Melt surface insulation powder Radex isotherm powder In continuous casting after transferring the pots from the melting section to the continuous casting unit, simultaneously with the discharge Intramuscular melting In casting, to prevent a drop in the temperature of the melt inside the patellar tendon, it is necessary to add a suitable coating to the melting surface to prevent heat loss of the melting due to radiation, conductivity, convection. This task is performed by a layer of solid and sintered powder. In addition, it protects the melt against surface oxidation and absorbs some of the impurities in the melt. This powder reduces the temperature drop of the melt in the pan and the tandish, and this causes better control of the casting speed, reduces the amount of oxygen in the melt and in general improves the casting conditions with better control. It is clear that preventing the drop in melt temperature has a significant effect on economic production, reducing energy consumption, increasing the refractory life of the pan and tandem. This material also prevents re-oxidation of steel by the atmosphere and due to the high ratio of calcium oxide to silica in this powder, it reduces the oxygen in the melt and also prevents the nozzle from being blocked by alumina impurities and desulfurization is better. The consumption of this powder is approximately 0.5 to 1 kg per ton and it must be poured on the surface of the melt and stored in a completely dry environment without moisture. Salim Sanat Sepahan Company is a manufacturer of various types of melt insulation isotherm powder (Radex). Melt, Salim Sanat Isotherm Powder, Radex Powder, Steel Isotherm, Salim Sanat Refractories

Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش as قندانی and استکانی in sizes 11 to 16 in quality, 65%, and -75% to -85% and 95% can be for more information with the unit sale of the company to issue 03136644312 contact please. Nozzle تاندیش the direction of outflow of the melt from تاندیش (cauldron of the middle) to the inside of the mold copper (کریستالیزاتور) machine continuous casting.That based on the time of casting, temperature, and conditions there melting % زیرکونیای(اینزرت) and analysis of the bricks in it are different. Brick and اینزرت zirconia, typically with different percentages of alumina can be made in two types of meal and drink. in the type of drink due to the lack of push presses from the analysis, the better and stronger, in order to cope with the melt used. Gap created between the اینزرت zirconia bricks can be used with presses up to each other with a sealing grout. part of the brain (اینزرت ) inside the bricks of ceramic (zirconia) is the pressure and temperature of the top of the melt, it is well tolerate . According to the conditions of the melt percent, اینزرت used normally from 65% to 95%. Nozzle تاندیش for use before the melt should be from both sides (the inside part of the تاندیش ) and اینزرت from the outside good ago be heated, because in the event of non-compliance with this point, causing shock, seeing the nozzle and breaks down the brick or leave, removal, or filling the lips, اینزرت . Before تحلیه melt in تاندیش inside the duct nozzle تاندیش from the sand, refractories such as chromite, fill, slag, and other impurities enter the melt نشضود and melted, under controlled conditions, واردقالب. Brick and اینزرت nozzle تاندیش in the form of there are different also based on the speed of casting and the dimensions of the mould hole diameter part zirconia is also changed . According to the different seasons of the year due to a drop in the temperature of the melt diameter اینزرت زیرکونایی also change . Now common sense industry sepahan supplier of all kinds of nozzle, تاندیش in the model, قندانی and استکانی in sizes 11 to 16 can be, if needed, with دفترفروش the company to issue 03136644312 contact please . Nozzle تاندیش on the floor of the تاندیش located, and the number of packages to نعداد casting lines. Also, due to the amount of tonnage of steel castings, the percentage of zirconia and alumina ولبلوک is changed . According to the cross sections of billets, casting, and the conditions of melting can be the diameter of the nozzle تاندیش the direction of outflow of the melt determined . The quality of the zirconia used in the nozzle تاندیش very important because it increases or decreases the speed of casting can be, which eventually causes the tearing line of the casting and stop. Nozzle تاندیش to a few models, is consumed . 1 - nozzle تاندیش قندانی with zirconia all the 2-nozzle تاندیش استکانی with zirconia half height 3 - nozzle تاندیش with zirconia all the 4 - nozzle تاندیش all zirconia The nozzles in two models of Percy and مونتاژشده with the mortar green . ولبلوک the nozzle, both round and rectangular are available. ولبلوک nozzle تاندیش due to the amount of tonnage of steel castings made with different percentages, alumina available .

Hello\r\nManufacturing unit\r\nCasting and machining department of #Mehrad_Sanat_Sinad complex\r\nWith the latest technology and casting equipment, machining and hard work, he is ready to sign contracts with companies, organizations and groups related to the cement, lime, coke, and mineral processing industries.\r\nThis unit has 5 ton and 3 ton induction furnaces, as well as a 6 ton furnace, which has the ability to cast cast iron parts up to 25 tons and steel and alloy parts up to 15 tons as a single piece, and the diameter of wheels and rims up to 4/ supports 5 meters, this unit has automatic and laser molding and is equipped with a material laboratory. Friends who need casting parts with high weight or thickness can place their orders, after the casting stage of the desired part in Carousels with a diameter of 3, 4 and 5 meters are machined and geared, please contact us to arrange a visit to sign a contract and place an order.\r\nThanks to the search team.

Manufacturer and supplier of cast iron and ductile ingots with export analysis

Danesh Banyan Haya Shimi Razi Company produces various grades of casting wax in Iran

⭐Qoqnos production group⭐\r\n3D modeling and design\r\nCasting of industrial parts, chandeliers and decorations, statues, fittings, medals, rings, logos, ornaments and...\r\nMaterials are silver, brass, aluminum\ r\nProduction of all kinds of lighting\r\nChandeliers, lampshades, candlesticks and decorations\r\n09191771535\r\n09190221003\r\nKakavand

Selling microsilica at the price of 6000 Rials per kilo. What is microsilica? This material is a byproduct of the production of special metals in electric arc furnaces.