70MHz dual-channel scope with multimeter and manual function generator HDS272S is one of the most key equipment for designers, manufacturers of electronic circuits and repairers of electrical and electronic equipment to check the range, frequency, phase difference, cycle time, check the performance of semiconductors in the circuit and … is. One of the most important features of this device is the ability to charge the battery (battery is provided separately) by a power bank and adapter with a lifespan of 4 hours of continuous use, connecting to a computer and supporting SCPI software, the possibility of connecting Flash USB, color screen 3.5 inches, light weight, memory up to 8K recording length, automatic measuring capability of its complete accessories.
Technical specifications: Oscilloscope:
70 MHz 2 channels
with memory
2 props
250MS/s sampling rate
3.5 inch color screen
8K internal memory\r \nUpdate rate 10,000 wfrms/s
20 types of automatic measurement
Flash USB
Maximum peak voltage: 400V
Small size and very light weight
Can be connected to a computer with USB Type-C port
Autorange multimeter specifications:
20000 counters
TRUE RMS
Voltage AC:750V and DC:1000V\r\ Current DC: 10A and AC: 10A
Resistance 100.00MΩ
Capacitance: 2.0000mF
Diode test and On/Off test
Frequency 40Hz-1000Hz
\r\ n
Generator function specifications:
Single channel 25 MHz
Output of sine, square, ramp and pulse signals with frequencies:
Sine 0.1Hz25MHz5MHz
Square0.1Hz 5MHz1MHz
Ramp0.1Hz
Pulse0.1Hz
EXP ;0.1Hz~5MHz
Sampling speed 125MSa/s
Amplitude at 50Ω impedance; : 0.01Vpp ~ 2.5Vpp
- Device weight 0.6 kg
Accessories:
Power adapter, USB cable, passive probe, cable clamp cable, multimeter probe (red and black)
User manual, probe adjustment screwdriver
*Battery is not included in the device pack and must be purchased separately.