Buy and price of double diode SKKD212 Buy and sell SKKD212-16

Thermocouple type K model ATK-L making the best type of alloy is that the head of the thermocouple to the shape of the parts, cable lug is a device has, and it can be easily installed . This product to measure the temperature of parts and products, because of the shape of the thermocouple, it increments the consumption of broad to be included.This product of the pieces used in the industrial power. Sensor type : type K Shape : کابلشویی Sensor, temperature measurement into two categories, 2 wire and 3 wire divided. The most common categories 2 its wire thermocouple, type K and type J in a category 3 wire is also temperature sensor PT100 . This type of three types of different sensors close to 95% of cases is applicable in the industry to be included. Thermocouple type K model ATK-L, one of the thermocouple common to measure the category average up to 400+ degrees, and easy to use. You can check for the exact and more. view and buy any of these products to the site automation 24 to the URL www.automation24.ir referred at the sensors, set the temperature sensor to compare products pay. Address : قم - بلوار شهید بهشتی - خیابان 24 yards motahari - No. 19 - shop automation 24 Phone : 36612678 - 025 www.automation24.ir info@automation24.ir

Relay a mail piece that is like کنتاکتورهای Electric operates. Basis, and application of the main relay in it is that when the voltage to the wire page the reach it creates a magnetic field and this magnetic circuit also causes a disconnect and connect of contact available on your relay are, which can be by means of the contact flared a lot of electrical appliances and electronic disconnect and connect and control.

Specialized sales center for all types of drives and soft starters\r\n09121181489-09122717361-02144038255\r\nViera Electric\r\nSpecialist center for all types of drives (inverters) and soft starters\r\nAll kinds of European, Asian, Iranian brands\r\nViera Electric offers a variety of drives and soft starters from world-renowned brands such as ABB, Danfoss, Inot, Occam, Sanyo, LS, Santerno, Gefran, Lenz, Siemens, Delta, Zima and...\r\nReasonable price, valid warranty, providing the principles and application of drive and soft starter for the correct selection of the device are among the services that will be provided to our dear customers in this collection.\r\nHaving a well-equipped and diverse warehouse, this collection will send your orders in the shortest possible time from a sufficient stock of drives and soft starters.\r\nWe will also be in touch with you through the website and contact number and respond to your needs.\r\nwww.VieraElectric.com\r\n09121181489-09122717361-02144038255\r\n\r\n\r\n\r\n\r\n\r\nDrive representative, Gefran drive representative, ABB drive representative, Danfoss drive representative, Zima drive representative, Delta drive representative, Delta drive representative, LS drive representative, Pentax drive representative, Inot drive representative, Sanyo drive representative, ABB drive representative in Iran, ABB inverter representative, Abb drive sales representative, Abb drive representative, Delta drive representative, Invt drive representative, Drive representative invt in Iran imaster inverter agent, invt imaster inverter agent, Lalezar ls drive agent in Tehran, lenze drive agent, ls inverter agent, ls inverter agent in Lalezar, ls inverter agent in Tehran, omron inverter agent, ssi inverter agent, santerno inverter agent, teco inverter agent, drive agent vacon in Iran, vacon drive representative, vacon drive representative, Yaskawa inverter representative, drive sales representative, inot drive sales representative, LS drive sales representative, Teko drive sales representative, Danfoss drive sales representative, Siemens drive sales representative, soft starter sales representative, Sanyo soft starter sales representative, aucom soft starter sales representative, soft starter sales representative abb Schneider soft starter dealer, Danfoss soft starter dealer, ls Siemens soft starter dealer in Iran, soft starter dealer, Siemens soft starter dealer, Siemens soft starter dealer

**[STB 3X 32 three-phase stabilizer 32 amperes] (https://www.automation24.ir/product-4015/stb-3x-32--%25D8%25A7%25D8%25B3%25D8%25AA%25D8%25A7 %25D8%25A8%25D9%2584%25D8%25A7%25DB%258C%25D8%25B2%25D8%25B1-%25D8%25B3%25D9%2587-%25D9%2581%25D8%25A7%25D8%25B2-32-% 25D8%25A2%25D9%2585%25D9%25BE%25D8%25B1%25DB%258C)**\r\n\r\n \r\n\r\n1. Suitable for 3-phase equipment and consumers alone\r\n2. Suitable for single-phase consumers installed in a three-phase distribution system\r\n3. It has a protection system against input and output voltage outside the permissible range\r\n4. It has a filter to protect consumer devices against noise and city electricity disturbances\r\n5. It has an audio alarm to announce overload\r\n \r\n\r\nFaratel STB 3X BLK three-phase stabilizer with a current of 32 amperes in each output phase can well protect three-phase industrial systems, precise laboratory devices, sensitive measuring devices, telecommunication systems, etc. against city electricity fluctuations and disturbances.\r\n\r\nIn addition, Faratel stabilizer has significantly increased the accuracy of consumer devices, and as a result, prolongs their service life and correctness, and prevents construction costs and wasted time. \r\n\r\nThe Faratel three-phase stabilizer device is designed and built in such a way that it adjusts and stabilizes the output voltage on 220 VAC for each phase, even during rapid changes in city electricity.\r\n\r\n \r\n**[Click here to view Faratel products.](https://www.automation24.ir/product/list/search?keywords=&in_description=1&category_id=0&inc_subs=1&manufacturer_id=102&pfrom=&pto=)**\r\n \r\n\r\n## The unique features of this device can be mentioned as follows:\r\n \r\n\r\n1. The device is equipped with a voltage stabilization circuit, so that it automatically detects the drop or increase in electricity and after stabilizing it, provides the appropriate voltage to the consumer.\r\n2. It is equipped with a protective system so that if the output voltage of each phase is more than 240VAC (input 275VAC) or less than 190VAC (input 140VAC) compared to zero, it will cut off the output of the stabilizer and disconnect it from the consumer devices against the illegal voltage. It provides protection and automatically connects the output power when the voltage returns to normal.\r\n3. It is equipped with a filter that removes the noise in the city electricity that causes disturbances in the operation of precise and sensitive devices and creates electricity free of any interference for the use of consumer devices at the output.\r\n4. It has a delay circuit in order to provide the appropriate voltage to the consumer in the event of a power outage, after the city\'s power fluctuations have been resolved.\r\n5. It is equipped with an audio alarm that sounds and warns when the device\'s load exceeds 25 amps in each phase. In this case, to stop the sound alarm, you must reduce the load. \r\n6. It has an input phase sequence detection circuit. In such a way that if the phase sequence in the input power is not observed, the output power will not be connected.\r\n7. If the consumer is a lamp, voltage stabilization during city power fluctuation is in the form of low light or full light of the lamp.

**[Shiva Amwaj electronic floater sensor (pack of 3) code 23P1] (https://www.automation24.ir/product-2922/%25D8%25B3%25D9%2586%25D8%25B3%25D9%2588%25D8% 25B1-%25D9%2581%25D9%2584%25D9%2588%25D8%25AA%25D8%25B1-%25D8%25A7%25D9%2584%25DA%25A9%25D8%25AA%25D8%25B1%25D9%2588%25D9% 2586%25DB%258C%25DA%25A9%25DB%258C-%25D8%25B4%25DB%258C%25D9%2588%25D8%25A7-%25D8%25A7%25D9%2585%25D9%2588%25D8%25A7%25D8% 25AC\\(%25D9%25BE%25DA%25A9-3-%25D8%25B9%25D8%25AF%25D8%25AF%25DB%258C\\)-%25DA%25A9%25D8%25AF-23p1)**\r\n \r\n\r\nShiva Amwaj sensor floaters are made of the best and most resistant materials against water and other conductive liquids. These sensors are resistant to corrosion in all kinds of alkaline and acid solutions.\r\n\r\nThis sensor is covered with polymer material in such a way that it has no external conductor contact surface and there is no possibility of electrical connection between these sensors with the tank or other sensors.\r\n\r\n \r\n\r\nThis product is a suitable device for automating the pumping systems of conductive liquids with the following two working modes:\r\n\r\n1. Protection against engine dry running\r\n2. Liquid level control\r\n\r\n\r\n## Features of the electronic floater sensor of Shiva Amwaj\r\nLiquid level control with variable resistance\r\nWith AC display: mains electricity\r\nWith REL display: relay connected\r\nH display: high level\r\nWith L display: low level\r\n \r\n**[Click here to view Shiva Amwaj products.](https://www.automation24.ir/product/list/search/?manufacturer_id=19&pageItems=120)**\r\n## Among the features of this product, the following can be mentioned:\r\n1- Use to control the emission of liquids and dry running of the engine\r\n2- Adjusting the sensitivity of the device based on the liquid resistance\r\n3- Setting the relay connection and disconnection time delay\r\n4- Installation on rails and other surfaces\r\n\r\n \r\n\r\n## Technical specifications:\r\n1. Supply voltage: R-N / 50-60 Hz / 180-250 VAC\r\n2. Temperature efficiency range: +65...-20 degrees Celsius\r\n3. Maximum humidity: 70%\r\n4. Relay output: 5 amp relay\r\n5. Input:\r\n C: common sensor\r\n L: low level sensor\r\n H: high level sensor\r\n9. Delay in connecting and disconnecting time: 1-10 seconds\r\n10. Sensitivity: 1-20 kilo ohms\r\n11. Internal consumption: 0.2VA\r\n12. Dimensions of the device: (60*86*72) mm\r\n13. Weight: 118 grams\r\n14. IP 30

**[Schneider 40 amp automatic switch] (https://www.automation24.ir/product-942/%25D9%2583%25D9%2584%25DB%258C%25D8%25AF-%25D8%25A7%25D8%25AA% 25D9%2588%25D9%2585%25D8%25A7%25D8%25AA%25DB%258C%25D9%2583-%25D8%25A7%25D8%25B4%25D9%2586%25D8%25A7%25DB%258C%25D8%25AF%25D8 %25B1-40-%25D8%25A2%25D9%2585%25D9%25BE%25D8%25B1)**\r\n\r\n### Automatic key:\r\nIn order to protect lighting facilities, industrial electricity, wire and cable and machines against overload and short circuit current, fuse, thermal switch or automatic switch is used. Maybe in some cases, the needs of the systems can be answered by a miniature key or a thermal key, but the many capabilities of automatic keys have increased the range of use of this key in the industry.\r\n\r\nAutomatic keys are classified into two categories: compact and air. Depending on the user\'s needs, both of the above categories can be used, but the main difference between these two categories is that compact automatic switches are made up to 1600 amps, and if an automatic switch with a higher current is desired, it should be of air switches. be used\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n**[Click here to view Schneider products.](https://www.automation24.ir/product/list/search?keywords=&in_description=1&category_id=0&inc_subs=1&manufacturer_id=2&pfrom=&pto=)**\r\n\r\n## Important features of automatic keys:\r\n\r\nIt is easy to adjust the current in these types of keys.\r\nMiniature switches are available up to 63 amps, but automatic switches (compact type) are made up to 1600 amps.\r\nThere are more accessories that can be connected to the automatic switch.\r\nThe operation mode of automatic keys is performed in three areas. (error area, area one, area zero) but miniature or thermal switches have two areas zero and one.\r\nAutomatic keys have remote control capability.\r\n\r\n## Things to consider when buying automatic keys:\r\n\r\n1. The automatic key can be adjusted or it cannot be adjusted\r\n2. Working current range\r\n3. The number of disconnected and connected bridges\r\n4. Short circuit breaking power\r\n5. Its dimensions\r\n6. Peripheral equipment

**[TRTP4 three-story rail terminal] (https://www.automation24.ir/product-415/%25D8%25AA%25D8%25B1%25D9%2585%25DB%258C%25D9%2586%25D8%25A7%25D9 trtp4)**\r\n\r\n\r\n \r\n\r\nThe two-story Pichi Raad rail terminal has the advantage of space optimization. It is worth mentioning that in this type of rail terminal, due to the fact that the upper and lower parts are not aligned, the following advantages are achieved due to the doubling of wiring density:\r\n\r\n\r\n \r\n\r\n## Strengths\r\n \r\n\r\n1. Can be installed on the TH35 rail\r\n2. Made of polyamide insulating materials in the terminal body to have improved electrical properties\r\n3. Ease of closing the terminal screws with a screwdriver\r\n4. Closing the opening of the cable entry to prevent multiple strands\r\n5. Proper connection without the need for special preparation for the cable\r\n6. Suitable for single-core or multi-core cables with different cross-sections\r\n7. Common covers and partitions for different types\r\n8. Fast, easy and safe installation of the jumper and the ability to remove its connection at desired times\r\n9. Can be used with protective conductor terminals for different sizes\r\n10. The use of terminal numbers in different sizes and the possibility of installing 10 of them at the same time\r\n\r\n\r\n\r\n\r\n**[Click here to view Raad products.](https://www.automation24.ir/product/list/search?keywords=&in_description=1&category_id=0&inc_subs=1&manufacturer_id=7&pfrom=&pto=)**\r\n\r\n \r\n\r\n## Points to know when buying a terminal:\r\n\r\n1. Allowed amperage of the terminal\r\n2. Terminal size\r\n3. Number of terminal floors\r\n4. Appearance of the terminal\r\n5. Can be installed on the rail or not

**[HMI Delta DOP-B07E411](https://www.automation24.ir/product-1342/hmi-%25D8%25AF%25D9%2584%25D8%25AA%25D8%25A7-dopb07e411)**\r\n\r\n## HMI Delta DOP-B07E411:\r\n1. 7 inches\r\n2. 800 x 480 pixels\r\n3. 65536 colors - TFT LCD\r\n4. 3 sets of COM port, supporting RS-232 / RS-422 / RS-485\r\n5. Download to transfer data via RS-232/Ethernet\r\n6. SD card support\r\n7. Support MP3 audio output\r\n8. In accordance with the IP65 standard\r\n9. Horizontal/vertical screen support\r\n10. Compatible with Windows XP, Windows Vista, Windows 7 operating systems\r\n11. HM editing software\r\n12. DOPSoft editing software\r\n\r\n\r\n**HMI stands for Human Machine Interface ** and means the intermediary between man and machine. HMIs are widely used in industry. In fact, due to the special conditions of communication with PLC, HMIs are used for this purpose to command controllable equipment and tools. With HMI, you can easily draw the graphic diagram of the equipment and use its internal memory to issue the desired command to any of the equipment programmed in the PLC. HMI has an environment for information exchange and mutual communication between electromechanical systems and the user. Allows the user to view and control the current state of the system. For example: different values ​​of temperature, pressure, time of operation reports in different periods of time, status of inputs or outputs, display of device errors and recording them in the memory can be done and viewed by this device.\r\n\r\n**[Click here to view Delta products.](https://www.automation24.ir/product/list/2_16/?manufacturer_id=95_5&sort=order-desc)** \r\n\r\n### General differences of Delta HMIs:\r\n\r\n1- With touch or key pages.\r\n\r\n2-Serial communication through two ports 485-RS ​​and 232-RS.\r\n\r\n3- Simulation.\r\n\r\n4- The ability to become a slave.\r\n\r\n5-Having a USB port to send and receive programs.\r\n\r\n6- The possibility of storing information.\r\n\r\n7-Having macro capability to perform calculations and logical actions.\r\n\r\n8- Can be connected to all kinds of PLCs.\r\n\r\n9- Ability to connect to inverter, servo drives, and any device that has 485-RS ​​port.\r\n\r\n10- The ability to display information as a curve or diagram.\r\n\r\n11- Ability to show animation.\r\n\r\n12- Having RTC in order to function on certain dates and times.\r\n\r\nIn fact, HMI is a graphic program where the display keys, hands, etc. are created by graphic shapes.\r\n\r\nMeanwhile, HMIs have the ability to connect to 255 devices at the same time and display their parameters. DOPSoft