There are no comments for this product
Bearings and their types Imagine the movement of two metal pieces on top of each other so that there is no movement facilitator between the two pieces. These two parts are created in a short time due to heat and friction, corrosion or failure. The main performance of bearings is exactly this. Bearings and their components, including bearings and roller bearings, were designed to minimize friction between mechanical system components and to facilitate the roller bearings to move relative to each other. They also prevent mechanical parts from vibrating and making noise due to the transmission of force to the parts. Another use of the bearing is to hold the parts tightly together. Bearings usually consist of two rings and a ball in different sizes and types, which have different applications depending on the appearance. These bullets are placed inside the ring and by rolling between the two pieces, they facilitate the movements of the pieces. Bearings are a subset of bearings. In general, bearings in Roham Sanat are made up of two subsets, bearings and roller bearings. As mentioned earlier, differences in their appearance make them different from other types of bearings. If the bearing had round, ball-shaped bullets, the bearing is of the bearing type; But if the bullets in the ring have different shapes such as needle or cylindrical, conical and…, the bearing is of roller bearing type. Screws, the device turns on. To ensure that the bearing is not loose, the rotational speed of the device should be high at the beginning, then the inner diameter of the metal of the bearing (without bobbit) is measured and its weight is determined based on its thickness. The rotation of the inner surface of the bearing is heated. When the temperature of the inner and outer surfaces of the bearing reaches a certain level, using zinc chloride solution and chloride powder should ensure that the inner surface of the shell is clean. Continue Babit process As the temperature of the bearing surfaces increases further, molten tin covers the inner surface of the bearing. After ensuring the adhesion of the castle inside the bearing, the rotational speed of the centrifuge reaches a certain level and the prepared babbitt is injected into the bearing shell. It is also important to note that the screws in the assembly (due to temperature increase) They can be loose (they can be tightened at any stage of the work. Then, after completely pouring the babbitt into the inner surface of the shell, cold water flow is created on the outer surface of the bearing to freeze directionally with rapid cooling of the bearing shell. "(At the bottom of the ad)"Bearings manufacturing, bearing construction, bearings manufacturing" (At the bottom of the ad)"
| Company | روهام صنعت |
|---|---|
| Tel | |
| Mobile | +98 912×××3447 |
| Whatsapp link | |
| Instagram page | |
| Website | https://rohamsanat.com/ |
| Country | Iran |
| Province | Tehran |
| Address | شهر قدس-خیابان انقلاب-خیابان پردیس-پلاک 36 |
| Postal code | 1785456323 |
