Madas gear regulator model FRG / 2MBCZ

Madas gear regulator model FRG / 2MBCZ

Buy all kinds of gas regulators with reasonable prices and fastest delivery time in the equipment A regulator is a tool for regulating and measuring gas pressure inside gas pipes. In general, regulators are classified into brass and steel. The regulation of pressure in the regulator is based on the laws of physics and is done mechanically by equipments such as valves and springs. The working mechanism of the regulator is such that by turning the handle, the spring inside the regulator is compressed and the gas spring pressure enters the regulator from the inlet part, then the gas pressure is reduced by the diaphragm. In terms of performance, regulators are divided into two types, single-stage and two-stage. Single-stage regulators reduce gas pressure in one stage and 2-stage regulators reduce gas pressure in two stages. Generally, 2-stage regulators are used for outputs below 10 times. When choosing a regulator, it is important to pay attention to the gas used and its chemical properties. Never use brass regulators for corrosive gases. Another important factor in buying a regulator is choosing the right output regulator. The output of the regulator must be selected according to the output pressure on which you intend to adjust. Also, the calibration accuracy of the regulator gauge is directly related to its output. The calibration accuracy of the regulator with an output of 100 times is about 5 times, while the accuracy of the calibration of the regulator gauge with an output of 4 times is about 0.1 times. According to the mentioned items, in order to buy a suitable regulator, the following items should be carefully specified at the beginning of the work: • Used gas • Output pressure required • Inlet pressure from the cylinder or line In addition to the mentioned items, in order to select the appropriate gas regulator, special attention should be paid to such things as the size of the pipe diameter, the type of connection (gear or flange), the required gas flow rate and even the brand of the regulator. Madas gas regulator size 1 inch gear model FRG / 2MBCZ Features of this gas regulator • Operation in the temperature range of -20 to +60 • With Shut Off Valve • Output pressure is from 110 to 200 mbar. • Safety lock on this model closes in less than 1 second. • Has a safety valve to increase the operation and safety of the regulator At Dematjahiz site, you can order all kinds of Madas gas regulators based on the type of gear and flange connection, with working pressure from 100 to 500 bar and fittings from 1 to 4 inches in the desired dimensions. For more information about our products, visit damatajhiz.com and read the resume of our products. Contact the sales experts to order the goods and receive advice.