Bear

Pak Bad Engineering Company is the inventor of the exclusive clean wind dryer. By installing clean wind turbines after the compressor, while obtaining significant amounts of condensate water, the efficiency and durability of the water trap, microfilters and dryers can be increased and moisture can be prevented, especially at the end of compressed air lines. Descent dryers of Pak Bad Engineering Company equipped with heaters along with water traps, inlet micro-filters and microfilters as a package, free of water and oil and other contaminants Pak Bad Engineering Company is the exclusive manufacturer of heater dryers With low capacities and dew point of 40 - Celsius to large dryers with desired capacity and pressure

Jahan Bazyaftalborz Recycling Industry ** [Manufacturer of PET recycling machines and lines] (https://Jahanbazyaftalborz.com)** - Lacquer-Nylon-Asiaabsur plastic can be visited to see how it is produced\r\nSee prices and devices and then compare\r\nAll devices are stainless and fully automatic\r\nIt has a 12-month warranty with the lowest amount of investment\r\nin the capacity of 500 to 2000 kg per hour\r\nThe possibility of providing a valid invoice to obtain bank facilities\r\nDear investor and industrialist, contact us at 09125910234 for more information

Green Azin importer of culture medium Made of country: India Made of materials: organic Packing weight: 5 kg Sterilized: Yes Cocopit salinity: less than 0.5 mm / cm (does not need to be washed.) . CocoPit is produced in compressed molds. Compressed cocopeat after being in water and absorbing moisture, can be converted into 70-75 liters of wet cocopeat, which depending on the size of the pot and the type of plant, you can do it alone or mixed with other planting media such as perlite, peat moss, sawdust. And ... put it in a pot. CocoPit Fine is fiber-free and has a fine texture. This type of coco peat is used in the production of seedlings.

Selling **aseptic tetrapack production line for packing juice and milk sachets** for **speed 24,000** 250ml sachets per hour\r\n\r\nAlong with installation and one-year warranty\r\n\r\nHigh quality European and Japanese industrial automation equipment\r\n\r\n## Complete septic line with process equipment + carton and pallet packaging\r\n\r\n- A complete aseptic production line for the production of all kinds of drinks such as milk and fresh juices with a long shelf life of up to 6 months\r\n\r\n- In the shortest time after the contract with us, this septic production line is ready to be installed in Iran and neighboring countries.\r\n\r\n## - Complete production line of aseptic juice\r\n\r\nIn order to be able to package fresh juice without preservatives, you need a full line of steak juice, so that the taste and flavor of the juice is preserved, and you don\'t need to keep it in the refrigerator and transport it with refrigerated cars. In addition to having a longer shelf life than other packaging and other methods. \r\n\r\n## - Complete production line of aseptic milk\r\n\r\nWith this aseptic method, you can store milk and flavored milk for a longer period of time in envelopes or cartons without refrigeration.\r\n\r\n\r\nThe price of the complete septic production line is economical with devices that use European technology.\r\n\r\n**Cartons and envelopes are provided by us, and you do not have to maintain the supply of raw materials.**

Brand: ELEGOO\r\nCountry of manufacture: China\r\nDevice dimensions: 200 x 200 x 352 mm\r\nDevice weight: 4 kg\r\nLight source: uniform light beam with a wavelength of 405 nm, manual ultraviolet lamp for drying the interior\r\nScreen: touch screen, TFT display\r\nMaximum baking dimensions: 140 x 165 mm\r\nMaximum washing volume with printing plate: 124 x 90 x 110 mm\r\nMaximum washing volume without printing plate: 131 x 90 x 220 mm\r\nOther features: with a rotating table and 360 degree rotation, fanless and silent operation, time setting up to 30 minutes, display of set time and remaining time

The production of various types of silicone bite, the UPVC profile or PVC pipe production blocks last for several years, and after spoiling, it will not have the necessary efficiency to stretch the product. Dies in an extrusion production line have the task of producing a single polymer product and at the same time the task of lightening the load of the extruders. After the cooling process, the polymer products enter the die, here the correct operation of the die blocks or bites helps to produce a smooth and economical product with minimal waste.\r\nMost of the deadly bites are made of silicone with different degrees of hardness. The use of rubber is also common in some products, but it has a shorter life compared to silicone and also has less adhesive power in the face of high production speed.

Gasoline production machine from sack and plastic waste\r\nProduction of diesel fuel from sack and plastic waste\r\nConverting agricultural plastic waste to diesel\r\nGuaranteed purchase of diesel, notarized contract\r\nOne year warranty and ten years after sales service\r\nSale of a machine for producing diesel fuel from sack and plastic waste with a capacity of 1 ton in one shift\r\n2 ton machine in one shift\r\n3 tons machine in one shift\r\n4 ton machine in one shift\r\n5 ton machine in one shift\r\nOnly 100 tons in one shift\r\nThe device has a digital system that does not require an operator.\r\nThe system of the device had a smoke elimination condenser that does not have smoke and environmental problems.\r\nThe system of the device has an anti-explosion system that guarantees the working environment.\r\nPlastic pyrolysis is a technique that converts plastic waste into energy in the form of solid, liquid and gaseous fuels. The process involves heating the plastic to temperatures in excess of 450°C in the absence of oxygen and sometimes with a chemical catalyst to break the molecular chains of the plastic and produce hydrocarbons. These hydrocarbons can then be used as recycled fuels to power engines, generators or burners.\r\nPyrolysis is a process of thermal decomposition of a substance in the absence of oxygen. The plastic is continuously collected in a cylindrical chamber and the pyrolytic gases are condensed in a specially designed condenser system to produce a hydrocarbon distillate consisting of straight and branched chain aliphatics, cyclic aliphatics and aromatic hydrocarbons. The resulting mixture is basically equivalent to oil distillation. The plastic is pyrolyzed at 370°C to 420°C and the pyrolysis gases are condensed and separated into liquids using fractional distillation to produce liquid fuel products. \r\nSetting up a pyrolysis line with a standard capacity of 5 to 15 tons\r\nSetting up a pyrolysis line for plastic and used rubber with a standard capacity of 20 to 30 tons as bach\r\nSetting up a plastic pyrolysis line with a standard capacity of 50 tons continuous\r\nLaunching of worn pyrolysis elastic line with a standard capacity of 50 tons continuous \r\nSetting up a plastic pyrolysis line with a standard capacity of 100 tons continuous\r\nSetting up a used tire pyrolysis line with a standard capacity of 100 tons continuous \r\nSetting up a plastic pyrolysis line with a standard capacity of 200 tons continuous\r\nSetting up a used tire pyrolysis line with a standard capacity of 200 tons continuous\r\nDesign and construction of distillation tower for desulfurization and distillation from 1 ton to 200 ton continuous capacity. \r\nGuaranteed purchase of diesel produced with a notarized contract \r\n09121001056\r\n09120130778\r\n04533873776

Gasoline production machine from sack and plastic waste\r\nProduction of diesel fuel from sack and plastic waste\r\nGuaranteed purchase of diesel, notarized contract\r\nOne year warranty and ten years after sales service\r\nSale of a machine for producing diesel fuel from sack and plastic waste with a capacity of 1 ton in one shift\r\n2 ton machine in one shift\r\n3 tons machine in one shift\r\n4 ton machine in one shift\r\n5 ton machine in one shift\r\nOnly 100 tons in one shift\r\nThe device has a digital system that does not require an operator.\r\nThe system of the device had a smoke elimination condenser that does not have smoke and environmental problems.\r\nThe system of the device has an anti-explosion system that guarantees the working environment.\r\nPlastic pyrolysis is a technique that converts plastic waste into energy in the form of solid, liquid and gaseous fuels. The process involves heating the plastic to temperatures in excess of 450°C in the absence of oxygen and sometimes with a chemical catalyst to break the molecular chains of the plastic and produce hydrocarbons. These hydrocarbons can then be used as recycled fuels to power engines, generators or burners.\r\n\r\nPlease call for more advice.\r\n09120130778\r\n09121001056