Production and sale of gluconic acid and basic fluorine acids

1- Cool paint (thermal insulation):\r\n Cool Paint is a heat insulator that has turned it into a heat insulator by using ceramic nanoparticles in the acrylic paint structure. These nano particles act like vacuum flasks and reflect the sun\'s energy. In this way, ultraviolet light and infrared rays cannot enter the building from the protected surfaces, and the energy used for air conditioning can be reduced by more than 40%. On the other hand, cool paint adheres well to the surface and makes it completely smooth. \r\n\r\n2- Topproof (colorless waterproofing of surfaces):\r\nTopproof is a waterproofing, waterproofing, penetrating and colorless liquid, and for this reason, it is ideal for sealing the facade of a building. After drying, no trace of Topproof remains on the surface and even the degree of dullness and glossiness of the surface does not change.\r\n Topproof is a completely water-based solution, and for this reason, unlike oil varnishes, which are difficult to apply in Sharjah areas due to the presence of dew on the surfaces, Topproof can be easily applied in these areas and there is no need for the surface to be dry. does not have\r\nTopproof is applied in two layers with an interval of 24 hours. Application by brush or roller is possible, but in order to save Topproof consumption and reduce application time, using a gun is a better option.\r\n\r\n3- Base Maker (acrylic putty): \r\nBase Maker is an acrylic putty that is used for sealing, repairing and leveling the internal and external surfaces of the building. Base Maker has excellent filling ability and high flexibility and does not crack or peel over time. The filling property of base maker significantly reduces the consumption of insulation materials. The acrylic base of this putty also creates high adhesion between the putty and the acrylic base insulators. On the other hand, this product is designed for use on concrete and establishes a very strong bond with this type of surface.\r\n\r\n4- Space filler (flexible seal):\r\nSpace Filler is a one-component coating based on acrylic resin and a highly elastic filler for incision and expansion joints. Space filler is very sticky and adheres well to the two surfaces adjacent to the seam. The elastic property of more than 500% of space filler causes that the building\'s microquakes and expansions and contractions caused by the change of temperature and seasons do not affect its efficiency, and at the same time, the materials used on the two side surfaces of the seams do not suffer damage and breakage.\r\nSpace filler can be easily used for sealing vertical and horizontal seams. Compatibility with the environment, being water-based and non-flammable are other prominent features of space filler.\r\n\r\n5- Prolak (surface sealer and polisher):\r\nProlac is a positive pressure waterproofing, completely colorless and shiny, which is available in two types of solvent-based and water-based, and in two groups, normal and anti-wear. Prolac\'s solvent based type is not recommended for wet and dirty areas. In these areas, choosing Prolak base water is a more desirable option. with attention

Bazargani Arvandchemi is an importer and seller of pharmaceutical, edible, cosmetic, sanitary and agricultural raw materials, including xanthan gum acid and other raw materials such as guargam, edible and industrial hydrogen peroxide, sulfuric acid. Formic acid\r\nBrax deca and penta\r\nOxalic acid\r\nSodium gluconate\r\nSorbitol\r\nColors\r\nNitric acid\r\n Stearic acid\r\nacetyl alcohol\r\n is essential oils and..

Arvandchemi Trading is an importer and seller of pharmaceutical, edible, cosmetic, sanitary and agricultural raw materials, including monoethanolamine acid and other raw materials such as \r\ndiethanolamine\r\ntriethanolamine\r\n edible and industrial hydrogen peroxide. \nSulfuric acid\r\nFormic acid\r\nBrax deca and penta\r\nOxalic acid\r\nSodium gluconate\r\nSorbitol\r\nColors\r\n Nitric acid, stearic acid, acetyl alcohol, essential oils, etc. Contact us for price inquiries and more information.

What is monoethanolamine?\r\nEthanolamines are actually a group of amino alcohols. Even a group of antihistamine compounds are known as ethanolamines. Dimenhydrinate, chlorphenoxamine, diphenhydramine, etc. are among these compounds. Monoethanolamines have properties of alcohols and amines. Therefore, they are able to react with both functional groups. These products are able to act as intermediate alkyl amines and react with acids to form salts and soaps. This material has a low evaporation rate at room temperature and will turn into a liquid form according to the temperature and purity level. Even in living tissues, this substance can be found, and this substance is one of the components of lecithin.\r\n\r\nMonoethanolamine absorbs water and carbon dioxide from the air and is miscible with water and alcohols in any ratio. The freezing point of this product is significantly reduced by adding water.\r\nTypes of ethanolamine\r\nMonoethanolamine\r\nDiethanolamine\r\nTriethanolamine\r\nProperties of ethanolamines\r\nName: Ethanolamine\r\nFormula: C2H7NO\r\nMolecular mass: 08 g/mol\r\nDensity: 1.01 grams per cubic centimeter\r\nBoiling point: 170°C\r\nMelting point: 10.3°C\r\nAppearance: A liquid with an ammonia-like odor\r\nSolubility in water: soluble\r\nProduction of monoethanolamine\r\nWhen the two chemical compounds of ammonia and ethylene dioxide are placed in the vicinity of each other in aqueous solution, they will react with each other. During this chemical reaction, the compounds: monoethanolamine, triethanolamine and diethanolamine are obtained. By using the stoichiometry of the reactants, the amount of each of these compounds in the product can be controlled and adjusted.\r\n\r\nThe important point in production in this way is that this process is highly heated and the temperature will increase drastically during this reaction. so that it may even reach the ignition temperature. Accordingly, this chemical reaction must be carried out in an equipped and safe environment.\r\n\r\nIndustrial production of monoethanolamine\r\nThis substance can be produced from the reaction of ethylene oxide with ammonia in aqueous solution. Diethanolamine and triethanolamine are produced during this reaction. The ratio of products can be controlled by the stoichiometry of the reactants.\r\n\r\nFeatures\r\nThis chemical is sticky.\r\nThis substance dissolves in methyl alcohol, glycerin and acetone.\r\nMonoethanolamine causes corrosion in metals such as iron, aluminum, zinc, copper, bronze and brass.\r\nWater, benzene, ether and carbon tetrachloride can be used as solvents for this material.\r\nThis product absorbs moisture and reacts with carbon dioxide in the air.\r\nLight can decompose this material.\r\nThis substance will be oxidized by air and turn yellow or brown.\r\nThe above composition has high viscosity.\r\nUses of monoethanolamine\r\nThe properties of monoethanolamine are used as a raw material in many industries to produce industrial products. Some of the uses of this material are mentioned below.\r\n\r\nProduction of detergents\r\nEmulsifier production\r\nMaking medicine\r\nbuild more

Sodium lauryl sulfate, abbreviated as SLS, with the formula NaC12H25SO4, or sodium dodecyl sulfate, abbreviated as SDS, or something close to it, sodium lauryl sulfate, or sodium lauryl ether sulfate, Sodium Laurylether Sulfate, abbreviated as SLES, are the most common anionic surface active sulfates (surface active substances anionic) of synthetic cleaners with high power and more precisely among surface active substances (surface active substances or effective substances) is This substance is an emulsifying, foaming, dissolution accelerating, and foaming chemical compound that is used in washing, detergent or food industries and is an anionic surfactant in shampoo production.[1]\r\n\r\nThis combination is found in most commercial detergents such as dishwashing liquid and industrial cleaners (car wash and salt floor cleaners and oil remover) and in more than 90% of hygiene and body and head cleaning products such as toothpaste, soap, shampoo, cream and lotion. Liquid or non-liquid is used to remove fat as a foaming and cleaning agent and an emulsifier of sticky substances and is one of the primary ingredients of cosmetics and medicine. [2] Sodium lauryl sulfate was first used as an engine degreaser during World War II because the chemical was abrasive and corrosive enough to remove the toughest oils and soot.

Capital Afarinan Naqsh Jahan Company is a producer of industrial vaseline

Production of sodium sulfate 98%\r\n _ With a light density of 36/.\r\n with 25kg packaging \r\n_ Heavy with a density of 1.2\r\nWith jumbo packaging\r\n_ Salt under .05%\r\n_ph7_,8 \r\n_ The sodium sulfate production unit is located in Ashgabat Tabas (South Khorasan), loading and shipping all over the country. \r\n With the best quality \r\n For purchase order \r\n And to receive the price, please contact the indicated number.\r\n thanks

**Iranian industrial grade ammonium chloride with a minimum purity of 99.5**