Polyurethane prefabricated plaster frame

Arca Polyurethane ultra-light stone and rock design panel\r\n\r\nThe dimensions of the stone design panel are 60 x 120 cm\r\nThe thickness of the stone panel is between 4 and 10 cm\r\nThe color of artificial stone panels is white with colorability\r\nWaterproof and shock resistant\r\nThe weight of the light stone panel is about 1.800 to 4.800 kg for each panel\r\nAbility to cut by manual and electric saws\r\nInstallation of rock design polyurethane panels by hammering nails and suitable glue\r\nPolyurethane stone panel can be used indoors and outdoors - ceiling and wall

A solvent-based spray that completely repels and waterproofs bathroom and toilet ceramic tiles, bathroom doors, and sinks (without any change in appearance) in an extremely effective way, in the shortest time, with high durability, resistant to temperatures of 30 - and +350 degrees Celsius is indirect and prevents destruction against sunlight and moisture with detergents.\r\nNote that the hydrophobic product can be used on oil paints\r\n\r\nTo make the surface hydrophobic before use, it is recommended to test it on a sample to familiarize yourself with the product.\r\n\r\n \r\n\r\nProduct volume 300 ml\r\n\r\nEach spray completely waterproofs a door\r\n\r\n \r\n\r\n \r\n\r\nHow to use:\r\n\r\n1- The desired surface must be clean, dry and free from any dust, oil and pollution.\r\n\r\n2- Use at a temperature of 10 to 35 degrees Celsius and without humidity.\r\n\r\n3- If you have just painted your door, it must have been 10 days since it was painted\r\n\r\n4- If your door is corroded, be sure to clean and repaint the surface before use\r\n\r\n5- If you plan to apply materials on ceramic tiles, make sure the work is dry and clean\r\n\r\n6- Spray the ingredients in a small amount on the surface and immediately spread with a microfiber towel (give circular massage.\r\n\r\n7- The sprays are not filled with gas, so there is no possibility of explosion.\r\n\r\nThe durability of these sprays (maintenance) in favorable conditions is more than two years.\r\n\r\n \r\n\r\nNote: The initial drying time is 4 hours and the final drying time is 30 hours.\r\n\r\nNote: If your door is not healthy (damaged or inflated), be sure to clean and healthy the surface before implementation.\r\n\r\nThen use this spray\r\n\r\nIt should not be wet on the work surface until it is completely dry.\r\n\r\n \r\n\r\nTo order through the purchase link or call 09127650471 and 02155162527

Polyurethane pre-made throat and light-hiding tools are used in the border between the wall and the ceiling. It is also suitable for installation on the edge of light-hiding for Kenaf roofs, rabbits and other types of roof coverings.\r\nTypes of throat and light concealing tools:\r\nLight-hiding tools can be ordered from a height of 4 to 30 cm.\r\nThroat tools are available in simple designs for modern and neoclassical styles with low steps, suitable for minimal and simple spaces, as well as tools with high height and floral and classic designs. Therefore, you will be faced with an incredible variety of throat and light concealing tools in Arcadecor.\r\nApplication and advantages of throat and light concealing tools:\r\nSynchronization of the space: by using these tools in the margin between the ceiling and the wall, all the defects caused by the irregular painting and plastering of the space will disappear.\r\nCurtain inscription: these tools can also be used as a curtain inscription. As a result, at the end of the work, you will have a throat, hidden light and curtain inscription in the same direction and in the same shape.\r\nUse as a concealer\r\nApplicability on all kinds of structures: due to its lightness, it can be easily used on any structure, including the kenaf.\r\nVery high colorability, even plastic color.\r\nVery high impact resistance of this tool.\r\nVery high execution speed.\r\nFor more information, contact our experts at Arcadecor or visit our showroom in the central office.

Polyurethane louver tool is one of the latest products of Arcadecor. These louvres are also called thermowall, kit-cut panel, louvre panel or even wall covering.\r\nPolyurethane louvre is produced in 3 designs and can be ordered. \r\nKit-cut polyurethane louver tool- code KP-034:\r\nThis louver is produced in width 34 and length 280 cm and is a very good substitute for thermowoods. \r\nPolyurethane louver tool with semicircle design - code DP-033:\r\nThis louvre is in the design of half circles joined together and can be ordered in dimensions of 33 cm and length of 280 cm.\r\nV-cut design louver tool - code VP-032:\r\nThis louver is in V design or zigzag (seven and eight). With dimensions of 32 cm in length and 280 cm, it is considered one of the latest wall covering tools.\r\nIt is safe to say that the aforementioned polyurethane louver wall covering designs cannot be found anywhere and Arcadecor is the first producer of these panels throughout Iran.\r\nAdvantages of using polyurethane wall covering panels:\r\n- Very high colorability of polyurethane louver panel; Any color base can be implemented on them, even plastic color!\r\n- Ability to perform on any cross section: due to the material of the prefabricated tool product, this panel can be easily cut in width and length and can be performed on any cross section with any dimensions.\r\n- Fast and easy installation: the prefabricated polyurethane tool is very light. Therefore, this item has a significant effect on the execution speed. Also, the installation of these tools is very simple using polyurethane glue and nail hammer. So they can be implemented in a very short period of time.\r\n- Can be used in wet environments: Pre-made polyurethane tools can be used without worry in wet environments such as toilets, bathrooms, swimming pools, etc., and they can be washed easily.\r\n- Flexibility: by heating the polyurethane prefabricated tool, this tool will be somewhat flexible and can be implemented in places with a low slope.\r\nApplication of polyurethane louver tool:\r\nThe use of these diorama panels and louvres is very important in the areas of the accent wall or the headboard walls.\r\nThese panels can also be used with simple framing tools, rock and stone panel tools, mirrors and linear lights.\r\nUsing polyurethane louvre panel as wall covering.\r\nFor more information and how to order, contact Arcadecor, a specialized manufacturer of prefabricated polyurethane tools.

One of the false ceiling examples that has gained many fans in recent years is the grillium false ceiling. The grid structure of these roofs allows users to give a beautiful appearance to the interior of the structure. Grillium is basically an example of open roof types and when the process of installing these roofs is finished, the final view of the work is in the form of a square or rectangular grid, and behind them, no other type of roof is used. This allows you to easily access facilities and other parts behind the roof. These products have different types that it is very important to know them before buying.\r\nThe salient features of Grillium aluminum false ceiling include:\r\n1- Quick assembly and disassembly\r\n2 - Open or exposed roof\r\n3- The main view is horizontal view\r\n4- Ability to produce with different widths and desired heights and desired distances\r\n5- It is decorative and can be designed in special halls and luxury entrances.\r\n6 - Ability to recycle

Golshani engineering technician\r\n\r\n\r\nSales, design and implementation of composite facade, glass facade\r\n, composite board, advertising luxury boards, elevator cover and roll shutter, flushing, fuel station view\r\n▪︎ More than 10 years of experience, real and documented resume\r\nBy implementing more than 400 composite projects (including buildings, fuel stations, signs, covers, elevators, flushing, etc.)\r\n▪︎ Variety of brands and colors, at different prices\r\n▪︎ Fast execution and skilled installer\r\n▪︎ 3d design\r\n▪︎ Providing a written guarantee\r\nGulshani\r\nContact for more information\r\nhttps://www.instagram.com/golshani.eng.tech\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\nImplementation of composite facade in Gorgan\r\nFacade design in Gorgan\r\nModern view of Gorgan\r\nComposite sheet in Gorgan\r\nComposite sheet sales in Gorgan\r\nPerformance of the panel in Gorgan

Golshani engineering technician\r\nSales, design and implementation of composite facade, glass facade\r\n, composite board, advertising luxury boards, elevator cover and roll shutter, flushing, fuel station view\r\n▪︎ More than 10 years of experience, real and documented resume\r\nBy implementing more than 400 composite projects (including buildings, fuel stations, signs, covers, elevators, flushing, etc.)\r\n▪︎ Variety of brands and colors, at different prices\r\n▪︎ Fast execution and skilled installer\r\n▪︎ 3d design\r\n▪︎ Providing a written guarantee\r\nGulshani\r\n\r\nContact for more information\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\nImplementation of composite facade in Gorgan\r\nImplementation of composite panels in Gorgan\r\nImplementation of glass facade in Gorgan\r\nComposite sheet sales in Gorgan\r\nThe price of composite sheet

Plastering the rectangular reception ceiling with traditional style is a beautiful and unique choice for the interior decoration of reception spaces. This type of plastering with special traditional patterns and designs is performed on rectangular ceilings. Beautiful lines and geometric shapes in this type of stucco give special features to the space. This type of stucco can be combined with colors and decorative details that match the traditional architecture of the house.\r\n\r\nThe best plastering group is the best performer of all types of ceiling plastering services in a rectangular shape and in classic and neoclassical styles.\r\nView portfolio: https://B2n.ir/g27441 \r\n\r\nVisits and consultations by top art experts are free.\r\nContact number: 09123216508\r\nWebsite: https://honarebartar.com/\r\nInstagram: honar___bartar