All Amitis antistellar sell and buy offers

The rotary valve is actually a pneumatic valve that manages the flow of granular powders. The desired material enters the valve through a funnel or other inlet and is managed by the valve rotator (spinning vanes), then it is deposited in separate packages to a conveyor system, all of which is done with minimal pressure drop. accepted.\r\n\r\nThis valve is often used in bag filters, silos, tanks and material hoppers.\r\n\r\nThese valves are installed at the bottom of the tanks and its task is to discharge And controlling the amount of output load compared to the input load by maintaining the pr ...

Device standard: AASHTO T153. EN 196-6. ASTM C204\r\n\r\nBlin (softness) cement device is used to determine the specific surface of the particles and as a result the softness of the cement. The size of cement particles plays a significant role in the hydration rate of cement when in contact with water. The specific surface area of ​​cement is a function of the size of cement particles. The finer the cement particles, the larger the specific surface of the cement. .\r\nIt has a pack of 100 pieces of blain filter.\r\nIncludes a perforated brass filter.\r\n\r\nAutomatic cement blain device, a dev ...

Device standard: DINEN196-1\r\n\r\nEfficiency of the device:\r\nPressure limit measurement of 5*5*5 and 4*4*4 cm molds and bending limit measurement.\r\nDevice molds: 4 It is 16*4 cm. It can be connected to a computer and a printer. General specifications of the device: Input voltage of the device: 220 V. Current consumption of the device: 4 A. Power of the device: 5. HP\r\nWeight of the device: 140 Kg\r\nDimensions of the device: 45*60*50=L*W*H cm

Device model: CM112B\r\nEfficiency of the device:\r\nThis device is used to use 8-inch sieves with a magnetic structure, and one of the other capabilities of the device is to use 9 8-inch sieves and 7 12-inch sieves.\r\nGeneral specifications Device :\r\n\r\nInput voltage of the device: 220 v\r\nCurrent of the device: 1 A\r\nPower of the device: 250 W\r\nWeight of the device: 26 kg\r\nDimensions of the device: L*W*H) (70*35*30) Cm)

A viscometer is used to quickly and easily measure liquids to determine their viscosity. However, it should be noted that this is only possible with less viscous liquids. Viscous pastes and other high viscosity materials are not suitable for measuring with flow cups. The structure of a flow cup is standardized according to DIN and is therefore always the same. It consists of a cylindrical hollow body, which in most cases ends in a replaceable nozzle. The openings of the nozzles, like the cup, are according to the relevant DIN standard. The device usually has 2-3-4-5-6 and 8 mm nozzles. This de ...

The special Alpine sieve for measuring with the help of air suction (airjet) with standard accuracy is available in two sizes with a diameter of 8 and 12 inches, all steel.\r\nEfficiency: to measure the remaining sample, on sieves less than 100 mesh with Air flow is created on the sieve and air suction is used under the sieve. General specifications of the device: Input voltage of the device: 220 volts. Current consumption of the device: 8 amps. r\n\r\nDevice power: 1.7 kW\r\n\r\nDevice weight: 25 kg\r\n\r\nDevice dimensions: 30*35*30(L*W*H)\r\ n\r\nspecific specifications of the device:\r\n\r ...

These devices are widely used in construction. Due to the small size of the machine, the quality of the mortar made in it is very good. You should note that the difference between a mixer and a concrete mixer is in their volume, and sometimes their names are said incorrectly. \r\nEfficiency: It is used for mixing cement mortar, measuring cement mortar preparation, cement timing and water measurement, and it has simple and automatic models.\r\nGeneral specifications: \r\nInput voltage: 220v\r \nCurrent consumption: 2A\r\nDevice power: 0.5Hp\r\nDevice weight: 55kg\r\nDevice dimensions: 500*300*6 ...

A filter press or pressure filter is a device used to separate solid particles from liquid, and it actually separates suspended particles in water. The filter press works by comparing the density of solids and liquids separate these particles from each other through pressure filtration. At this stage, the mixed materials, which are called slurry in everyday terms, are pumped into the filter press and dewatered under high pressure.\r\n\r \nThis device has a tightening lever, air inlet valve, material inlet cap, pressure gauge, drain valve, safety valve, handle and floor holding handles.

The efficiency of the calorimeter (hydration heat measurement device):\r\nThis device is used to determine the hydration heat of cement using the water solution method.\r\nThe device consists of a double-walled glass flask that is placed in a wooden insulated box. .\r\nThe accessories included with the device include an electric stirrer, a Beckman thermometer (100-part adjustable mercury thermometer) and a cement pouring funnel. Different chemical and physical methods and determining the specific heat capacity of different materials are used. The root of the word calorimeter comes from the Gre ...

In the laboratories, it is necessary to take a sample that matches the characteristics of the full load, which is a very large volume, and for testing, a small volume sample with the same characteristics is needed. Therefore, the above sampling method requires a special tool such as a sampler or bombo and then a divider. The divider classifies the harvested samples into smaller sizes with the same characteristics. The dividers provided by us are in accordance with the standards of the major companies that manufacture this product in the world and come with three colored steel collection basket ...

The jaw crusher is one of the least friction, least expensive, and most convenient stone crushing machines, which makes this device popular among consumers. Jaw crushers, like hammer crushers, are in the stage First, crushing of minerals is used in stone crushing and ore dressing factories. In these stone crushers, the material is crushed by compressive or shearing forces between two flat (jaws) or wavy plates, one of which is fixed and the other is mobile. General specifications: Voltage: 380 V Current Power: 3 HP Weight: 250 kg Outlet opening size: 1-10 mm. Capacity: 350 Kg/h. Material of ja ...

Efficiency:\r\nSuitable for softening powder materials with high hardness by abrasion\r\nGeneral specifications:\r\nInput voltage: 380V\r\nPower consumption: 12A\r\nPower: 5KW\r\nWeight: 48Kg \r\nDimensions: h-40cm w-35cm L-60cm\r\nSpecific specifications:\r\nMaterial input size >10mm\r\nOutput material size adjustable up to 50 microns

Ball mills or ball mills are steel or ceramic cylinders that are similar to cylinders and usually have a non-metallic ceramic coating around them to prevent metal contamination. The wings of the mills are installed horizontally and are partially filled with round steel or ceramic balls to turn hard materials into a soft powder. They rotate to turn non-metallic materials such as chemicals, minerals, colored materials and ceramic materials into powder. The working method of the ball mill is that during the rotation of the ball mill, the cascade movement of the balls leads to actions such as hitt ...

Efficiency: for pulverizing all kinds of hard and soft materials and high efficiency for very soft materials and organic materials\r\nWith the advancement of technology, many manual activities and jobs have been replaced by different machines to make the work easier for users. Nowadays, for easy grinding, industrial grinding machines are used in various industries of food production, construction materials, chemicals and pharmaceuticals. General specifications of the machine: Input voltage: 380 v Current: 5 A. Power: 3 Hp. Weight: 47 kg. Dimensions: 50*25*1100 mm. : 300 microns\r\nCapacity: 20 ...

Efficacy: It is suitable for processing cement and concrete samples in adjustable temperature and humidity. This product, with the ability to adjust and control the desired temperature by the user, is one of the most useful products in all kinds of laboratories. This device uses the best materials and the highest quality raw materials, which are very resistant in all kinds of laboratory conditions. It also has a digital screen to display the temperature and humidity. General specifications of the device: Voltage Input: 220 v Artificial current: 2 A Volume: 0.7 m^3 Weight: 85 kg Dimensions: 100 ...

Efficiency: It is used to keep cement and concrete samples immersed in water with adjustable constant temperature.\r\nThis product has the ability to adjust and control the desired temperature by the user and is one of the most useful products in all kinds of laboratories. .\r\nIn this device, the best material and the highest quality raw materials are used, which is very resistant in all kinds of laboratory conditions.\r\nIt also has a digital screen to display the temperature and humidity level.\r\nGeneral specifications of the device :\r\nInput voltage: 220 v\r\nSynthetic electric current: ...

Efficiency: It is used to cut and halve the kernels from the diameter.\r\nThe tables are hard and can be used in different sizes To use tables and other hard objects used in buildings, they can be cut to the desired size with a table saw machine. This device is a complete set and is portable. This device is very high quality and durable. \r\nIf you are looking for a portable machine that can cut all kinds of materials with significant cutting accuracy, the Amitis Pod Setare table cutting machine is the best option for your work.\r\n r\nGeneral specifications:\r\nBlade size: 45 cm\r\nPower: 4 H ...

Device standard: AASHTO T153. EN 196-6. ASTM C204\r\n\r\nCement Balin Test:\r\nCement Balin Test is the same test for determining the degree of softness of cement by the Balin method (or actually with the cement balin machine).\r\n\r\nDefinition of Balin Cement: The definition of blaine cement can be defined based on the numerical value of the specific surface of cement particles that is determined in the blaine test. It significantly improves its behavior during cement hydration.\r\n\r\nEfficiency of the device: suitable for determining the softness of cement. Steel\r\n2. Brass mesh\r\n3. Spe ...

Device standard: ASTM C 187-C191\r\nEfficiency: This device can be used to check the quality of cement used in the workshop because spoiled cements have a setting time that is more than normal. The initial and final setting of the used cement occurs when we mix the cement powder with the right amount of water, it becomes a soft paste that loses its plasticity over time and finally becomes a hard object. The initial setting time is the time elapsed from the moment of mixing water and cement and the final setting time is the time elapsed from the moment of mixing water and cement until the time ...

Device standard: ASTMC187-C191\r\n\r\nEfficiency: This device can be used to check the quality of cements used in the workshop because spoiled cements have a setting time that is more than normal. Finally, cement is used, and when we mix cement powder with the right amount of water, it becomes a soft paste that loses its plasticity over time and finally becomes a hard object. The initial setting time is the time elapsed from the moment of mixing water and cement and the final setting time is the time elapsed from the moment of mixing water and cement until the time when the effectiveness of th ...

Device standard: ASTM C151, c141-D.M.3/6/68-UNE7207 Efficiency of the cement autoclave: A cement autoclave device is used to measure the shrinkage of cement and concrete samples at specific temperature and humidity pressure. In the cement autoclave process, water vapor is injected under high temperature and pressure into the chamber inside the autoclave. When water vapor is injected into the cement autoclave under these conditions, due to the fact that the pressure applied is higher than the pressure in the atmosphere, it causes the heat to penetrate deeper into the cement at a faster r ...

Sieve literally means a sieve, which in the past was called a provision. In fact, the use of a sieve to separate objects from a physical point of view is arbitrary. But steel sieves, in addition to this use, have several other properties that make their use so perfect that it takes the commercial title of laboratory sieve. Today, the laboratory sieve is a precise tool. It has a special place in industries. The scope of use of laboratory sieves is from agricultural and food industries to pharmaceuticals, mining, construction, etc.\r\nFeatures of stainless steel sieves:\r\n\r\n1. Anti-rust and o ...

Dimensions: 15x30 cm\r\nIn America, the method of testing concrete and compressive strength of concrete using a cylindrical sample is very common. Concrete is poured into a cylindrical mold with a height of 30 cm and a diameter of 15 cm. In this case, the stress value at the time of failure of the sample is considered as the compressive strength of concrete. Usually, for a type of concrete, the compressive strength of a cylindrical concrete sample is lower than that of a cubic sample, and this difference is mainly due to the difference in dimensions and shape of the two concrete samples.

Dimensions: 15*15*15 cm In England, it is very common to test the compressive strength of concrete on a cube sample. A 15 cm cubic sample of concrete is placed between two parallel plates of the compressive strength measuring device and then subjected to compressive force. The stress in the failure stage of concrete is considered as its compressive strength. Concrete cube molds are among the molds used for molding. The concrete sampling mold produced in this way has a smooth surface. This is the reason why it is very easy to work with the concrete cube mold and removing the sample from it is ...

Device standard: isiri12015\r\nThis device is used to determine the normal concentration of gypsum. The modified Vicat consists of a movable metal rod that is connected to an aluminum cone in the lower part. General specifications of the device: Dimensions of the device: 29*19*14 cm. Weight of the device: 2 kg\r\nparts with the device :\r\nconical clamping needle\r\nmodified cone of water meter\r\nVicat mold\r\nglass under Vicat

An autoclave device is a device that destroys viruses and bacteria and disinfects devices by using the heat of water vapor under pressure or non-moving materials, chemical and non-chemical methods.\r\ n\r\nThe autoclave device is used in medicine, dentistry, chemical industry, food industry, clinical laboratories, research, microbiology and public health centers. Due to the extreme importance of hygiene in these environments, the autoclave can perform disinfection in the best way and cause sterilization (destruction of all forms of microbial life).

Normensand standard sand (1350 gram DIN standard sand) is a type of silica sand with a uniform and specific composition and granulation in 1350 gram packages, which is used as a reference sand in determining the bending and compressive strength of all types of cement.\r \n\r\nThe presented sand is manufactured by NORMENSAND, Germany and has a guarantee of product authenticity.\r\n\r\nTypes of sand according to the type of stone:\r\n Silica sand: This type of sand is one of the most abundant examples. It is sand because its mineral, silica, is found in large quantities in nature. But using this ...

Standard cement mortar sand is a type of silica sand used to make standard mortar and determine cement strength. And its weight according to its standard is 1350 ± 5 grams. Types of sand according to the type of stone: Silica sand: This type of sand is one of the most abundant examples of sand because its mineral is Silica is found in large quantities in nature. But using this type of sand is not suitable for mold design. Zirconium sand: This sand has high thermal expansion properties and is suitable for making molds and furnaces. Zirconium sand has a very high temperature resistance. Chromite ...

American standard 114q cement is used to calibrate the Blaine device. Made in America. 5 grams of pure cement. Cement as the main ingredient in creating cohesion in concrete should be used with special precision and sensitivity. to be placed.\r\n\r\n There are different types of cements, each of which is used in different cases depending on their characteristics.\r\n\r\nThe cements used in each project must be selected according to their characteristics. physical, chemical and mechanical properties and appearance characteristics should be consistent with what is mentioned in the plans, private ...

Filter papers are semi-permeable papers used for separating solid phases from liquid and filtration. Sometimes they even use filter paper to separate the solid phase from the gas phase. \r\n\r\nTypes of filter paper in terms of texture size:\r\nFine texture: filter papers are used to filter very fine sediments, these filters have a fine texture with a porosity of 2 to 3 microns and relatively fast It is low.\r\nWhatman 42 and 44 and blue band S&S 5893 (Schliecher & Schuell 5893) is an example of this type of filter paper.\r\n\r\nMedium texture: used for smoothing sediments containing m ...

Device standard: ASTM C183\r\nEfficiency of the device :\r\nThe homogenizer is used to mix and homogenize dry materials. This device uses a digital multi-range timer. Technical specifications of the device: Capacity: 1 Kg. Motor power: 1800 W. Dimensions: (600*450*560 mm = ( L × W × H\r\nWeight: 35 kg\r\n\r\nThe homogenizer is one of the laboratory equipment that is used for homogenization and crushing of a wide range of liquid and solid materials. Physically, it transforms the desired material into small and uniform sizes. Homogenizing materials using a homogenizer compared to older methods p ...

This machine is used to test the washability of detergents (liquid and powder) on dirty clothes and is mostly used in detergent manufacturing factories and textile colleges and laboratories and detergent testing centers.\r\nAll parts of this The device is designed and built locally by the engineers of this company according to Iranian standards. This device is made in 6, 8 and 12 stage models. The temperature can be controlled from the ambient temperature to 80 degrees with an accuracy of 0.3 degrees and engine speed. It can be adjusted from 20 to 100 with an accuracy of 0.5 revolutions per mi ...

Performance : Suitable for determining water absorption and porosity of cut ceramic tiles A desiccator is one of the laboratory equipments, which is made of glass and consists of two parts: a door and a chamber. The lower part of the chamber is divided into two parts by the mesh part. The basis of this device is to remove moisture from the material or some devices. In order to reuse the moisture absorbent seeds, they should be placed in a furnace or oven to remove the moisture absorbed by the material. General information: Input voltage 220 volts city electricity Current consumption of 5 ...

Archimedes table consists of several main parts: \r\n\r\nArchimedes table base\r\nArchimedes scale\r\nArchimedes bucket\r\nDensity basket \r\nThis device is made of a metal profile table . Archimedes' table has two horizontal floors, one is fixed, which is the upper floor and where Archimedes' balance is located. The bottom floor is a sliding floor that goes up and down in the body of the table. Of course, the movement of this floor is connected to a boxel wire and at the end it is connected to the lifting winch. If the winch latch is pulled, the floor will drop down and we use the w ...

The sliding pendulum device or the English pendulum is used to measure the resistance of all types of surfaces and floors against sliding and slippage in the laboratory and in the field; This device comes with the following:\r\n\r\nAdditional skill for testing on a variety of polished stone surfaces\r\nFlexiglass ruler to confirm slip length\r\nThermometer in the measurement range of 10 - Up to 110+ degrees Celsius for surface temperature measurement\r\nTripod, washing bottle, brush and required test tools\r\nCarrying box\r\nCalibration certificate according to EN 1097-8 standard (or according ...

Measuring the amount of torsional anchor of the cutting blade, which is driven into the soil with certain dimensions and made to rotate at a known constant speed, to calculate the undrained adhesion of soil deposits, especially very sticky sticky soils, is called cutting blade test. \r\n\r\n\r\nThe blade cutting test\r\n\r\nThe first use of a blade cutting device was done by John Olsen (1918) in Sweden. But the wide and acceptable use of this device did not take place until after the additional work of the Royal Swedish Geotechnics Initiative was done between 1947 and 1949 regarding this exper ...

The Schmidt hammer is one of the most common and widely used impact tools, which can be a valuable tool when used correctly. But carelessness and use without identifying the effective parameters can lead to incorrect results. Schmidt hammer is a fast, low-cost and non-destructive method both in the laboratory and on site. This method cannot be used as a substitute for the standard compressive strength test, but it is a method to determine the uniformity of concrete in the structure or to compare the change of concrete quality in different parts of a structure. This test is sensitive to local c ...

Hot plate is one of the laboratory equipment and if we want to name its applications, it is often used for heating and gradual heating of laboratory liquids and materials, and it is one of the equipments that is included in the list when the laboratory is set up. Hot plates are also known as plate ovens, and in new and modern examples of this device, it is possible to stir materials and solutions at the same time as they are heated. \r\nCan be ordered in different sizes in two models, aluminum plate and Teflon plate

Device performance: It is used for softening and grinding hard and very hard materials in a short period of time up to a softness of 10 microns for use in the X-Ray disc mill. General specifications (vibrating mill) - Fine Mill ( CM 108) :\r\nIts input voltage: 220 V\r\nIts consumption current: 3 A\r\nIts power: 1.5 Kw\r\nIts weight: 280 Kg\r\nIts dimensions: 100*30*75(L *W*H) Cm\r\nIts exclusive specifications :\r\nThe maximum size of its input material: 2.5 mm\r\nThe minimum size of its output material: 10 µ\r\nThe material of its mortar: steel cream with a hardness of 63 Rockwell with a rin ...

Standard:\r\n\r\n ASTM C31, C192 AN 12340-2, 12350-4 BS1881-108\r\n\r\nFunctional description:\r\n\r\nThis machine is actually a table in the form of It is standing, which by creating a vertical vibration through magnetism causes the mold closed on it to shake.\r\n\r\nThe body of this device is made of steel with suitable springs installed, and it is also made of electrostatic paint coating. For this purpose, this device can be used for concrete as well.\r\n\r\nIn addition, this device has a digital display through which the intensity of vibration and the time of vibration can be determined.\r ...

For samples made of polystyrene, clay bricks, mosaic, etc., with two supports in accordance with the standard and with the ability to adjust the distances between the supports, with a hydraulic control unit, with a jack for applying force with a suitable course, easy transportation with industrial locking wheels It has a force and displacement sensor with very high accuracy, equipped with an electronic interface board to transfer information from the sensors to the computer. Technical specifications: A) digital, can be connected to a computer with control command through the keyboard\r\n\r\nb) ...

Standard: ASTMC31, C1952 EN 12340-2, 12350-4 BS 1881-108ISI Function description: This device is actually a table that vibrates the mold closed on it by creating vertical vibration through magnetism. The body of this device is made of steel with suitable springs installed and it is also made of electrostatic paint coating. In addition, this device has a digital display that can be used to determine the intensity of vibration and the time of vibration. Technical Specifications: Power 400 watts Input voltage 220 volts Power consumption 2 amps Digital controller with LCD ...

Efficiency: making dense tablets from dry material powder for X REY device. With automatic timer. General specifications: Input voltage 380 volts, three phases. Current consumption: 4 amps. Power: 4 horsepower\r\nDimensions: 70 length, 60 width, 120 height (cm) The size of the powder is 8 to 12 grams

Standard: DIN EN 196-1. BS3892\r\n\r\nEfficiency:\r\nSuitable for preparing and compacting mortar samples made of cement in prism molds\r\n\r\nGeneral specifications:\r\nInput voltage 220 V\r \nPower consumption 3 A\r\nPower 5 KW 20/\r\nWeight 48 Kg\r\nDimensions H-40cm L-105cm W-50cm\r\n\r\nSpecial specifications:\r\nMotor control by inverter \r\nIt has an internal digital timer for stop time\r\nIt has a digital number gauge\r\nThe clip is designed to fit different types of molds\r\nIt has a furnace color and is resistant to electrostatics\r\nA single-phase 1 horsepower motor

Standard:\r\nASTM C31, C90, C143, BS 1881-125, EN 12350-2, ISIRI 3203-2\r\n\r\nDescription and operation:\r\n\r\nThis device is used to detect the value Concrete hardness is used, which consists of devices with standard sizes. "Concrete Slump Test" or "Slump Cone Test", a measure to evaluate the uniformity of concrete quality. In terms of flow and performance in different services, it is a mixer, or so to speak, any "Batch" (Batch). By using concrete slump measurement, the impact of mixer feed changes on concrete fluidity is monitored daily or hourly. For example, ...

The value of concrete's resistance to bending before breaking or cracking is called concrete flexural strength. The test to determine the bending strength indirectly determines the tensile strength and modulus of elasticity of concrete; In a way, it can be said that conducting this test is designed to find the weak dimension of concrete and the need to strengthen concrete with reinforcement or other concrete additives. \r\n\r\nSince the weakness of concrete in bending and stretching is the most important limitation facing concrete structure designers and managers, it is necessary to calcu ...

National standard number: 2-9169\r\n\r\nEfficiency :\r\nSuitable for determining the amount of wave and gunia of ceramic tiles\r\nGeneral specifications :\r\nDimensions 20*80*80 cm\r\ Exclusive specifications :\r\nSmooth surface system with relevant appointments\r\nAnalog or digital clock measuring system\r\n(the ability to transfer information to a computer as an option)\r\n100 mm accuracy\r\nElectrostatic furnace body color Accommodating tiles and ceramics up to 60x60

The efficiency of the device: the device for determining water absorption in vacuum based on the water absorption of all types of tiles and ceramics up to 100 x 100 cm. General information: Volume: 600 L Capacity: 10 pieces of 100x100 tiles Weight: 300 kg Voltage: 220 v Consumption current: 1 A Water inlet connection: 1/2 In Dimensions: 145*80*150 cm Specific specifications: 1. Digital display and automatic control 2. The ability to adjust the water height for various tile sizes 3. Ability to adjust vacuum pressure 4. Setting the time in two stages 5. ...