Company raimoon http://www.raymongostar.com
flocculants RAYMON A235 flocculants RAYMON A245 flocculants FLOPAM A331 TIANRUN A556 TIANRUNA756 (At the bottom of the ad)
جدا off phases solid-liquid – dewatering off بازیافت water in the processing plants, frequently, is inevitable, especially in cases where the plant in an area of low water is located, etc. avoid wasting water in order to recover and also avoid environmental pollution and waste of elements, etc. Is very important. Given that most methods of mineralizing layout in the environment takes place, including a significant amount of water is, in this case, the product full-blown the final for the pulp, which will be sometimes also very is not diluted and should rinse off it (i.e., separating the solid from the liquid) moisture, it has the size, reducing the alliance to carry or do other activities industrial ready-crafted. ICON in most cases the bulk of the water associated with the tailings out to be, so in order to: • stock up on waste http://www.raymongostar.com • avoid being contaminated by the environment, by the water, along with mineral http://www.raymongostar.com • recovery and reuse of water http://www.raymongostar.com جدا the water contained in the tailings from the seeds of a solid is essential. ICON in the different stages of mineral makeup may also rinse off the minor pulp in order to adjust the concentration it required. Also, in some ways, makeup, such as methods هیدرومتالورژی also after the dissolution of minerals or element desired in the solvent used, etc., separating the phases, solid residues, etc. from a solution rich in it is necessary. روش, the rinse can be generally 3 categories divided into: • depositing http://www.raymongostar.com • filter or filtration http://www.raymongostar.com • drying http://www.raymongostar.com در situations where the difference of density of solid and liquid much to be methods of depositing the has the best yield is. This is in mineralizing layout that liquid about water consumption is usually honest. However, there are methods هیدرومتالورژی are depositing the necessary performance to do not be because with the increase in carat solvent relative to the element or mineral is dissolved in. its density is also high, and gone to the density of the solid beads, the remaining gets close. In such circumstances, can only be the filtration method used. ICON mineralizing layout usually rinse off a combination of the two methods above. The bulk of the water first to the method of depositing the separated from the rest, not. in the result, the pulp thick, is produced, which contains 55% to 60% solid. At this stage, can be up to about 80% of the available water have separated, then filter out the pulp thick, the cake comes when the humidity is 10% to 20% and, if necessary, can be used in a step other as well with thermal drying moisture it to 5% or less injured. http://www.raymongostar.com
Company | رایمون گستر آریا |
---|---|
Tel | +98 26-3×××9023, +98 26-3×××9039 |
Mobile | +98 912×××9510 |
Country | Iran |
Province | Alborz |